Optimal Predilatation Technique for BVS Implantation (OPTI-BVS)

October 25, 2016 updated by: MUDr. Ivo Varvařovský, Ph.D, Cardiology Center Agel
The purpose of this study is to determine the optimal way of predilatation for BVS implantation.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Unknown

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Randomized, single-center study. Forty-five patients with intended BVS implantation will be randomized in ratio of 1:1:1 to different predilatation strategies(non-compliant balloon/Emerge NC™, Boston Scientific, cutting balloon/Flexitome™, scoring balloon/Scoroflex™,Orbus). Predilatation is intended to be done in a vessel:balloon ratio of 1:1. If the device is not able enter the lesion, it will be replaced with a conventional semicompliant balloon with the same predilatation strategy (a vessel:balloon ratio of 1:1) After a successful predilatation, the BVS (Absorb™, Abbott) will be implanted and this procedure will be accomplished by a high pressure postdilatation with a non-compliant balloon (Emerge NC™, BSCI). The MLA of the Absorb stent will be evaluated with optical coherence tomography (OPTIS, St.Jude).

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Anticipated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
45

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Phase 3

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

18 years and older (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • patients undergoing percutaneous coronary intervention (PCI)
  • lesion no more than 25 mm in length with a reference-vessel diameter of 2.5 to 3.75 mm on visual assessment

Exclusion Criteria:

  • patients with acurate myocardial infarction (STEMI)
  • patients with specific complex lesion features (left main, aorto ostial, bifurcation with side branch ≥ 2 mm in diameter, extreme angulation proximal or within the target lesion, moderate or heavy calcification proximal or within the target lesion, chronic total occlusion)

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: Non-compliant balloon
15 patients, before BVS implantation is coronary artery stenosis dilated with this type of balloon
Device: Predilatation with non-compliant balloon
Coronary artery stenosis is dilated before BVS implantation with the use of non-compliant balloon (standard procedure). Size and dilatation pressure is done according to OCT measurement of the coronary artery (distal segment / balloon diameter = 1:1)
Experimental: Scoring balloon
15 patients, before BVS implantation is coronary artery stenosis dilated with this type of balloon
Device: Predilatation with scoring balloon (Scoroflex)
Coronary artery stenosis is dilated before BVS implantation with the use of scoring balloon. Size and dilatation pressure is done according to OCT measurement of the coronary artery (distal segment / balloon diameter = 1:1)
Experimental: Cutting balloon
15 patients, before BVS implantation is coronary artery stenosis dilated with this type of balloon
Device: Predilatation with cutting balloon (Flextome)
Coronary artery stenosis is dilated before BVS implantation with the use of cutting balloon. Size and dilatation pressure is done according to OCT measurement of the coronary artery (distal segment / balloon diameter = 1:1)

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Minimal lumen area (MLA) in the BVS (mm2)
Time Frame: Immediately after BVS implantation
After BVS implantation, optical coherence tomography is used to measure MLA in the scaffold area.
Immediately after BVS implantation

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Clinically - driven target vessel revascularization
Time Frame: 12 months after the procedure
Patient is followed after BVS implantation in 1,6 and 12 months in the outpatient department.
12 months after the procedure
Eccentricity index
Time Frame: Immediately after BVS implantation
After BVS implantation, optical coherence tomography is used to measure MLA in the scaffold area. Eccentricity index is calculated as minimal luminal diameter divided by maximal luminal diameter in the MLA segment.
Immediately after BVS implantation
Expansion index
Time Frame: Immediately after BVS implantation
After BVS implantation, optical coherence tomography is used to measure MLA in the scaffold area. Expansion index is calculated as minimal luminal diameter divided by maximal expected diameter of the non-compliant balloon used for high pressure postdilatation.
Immediately after BVS implantation

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cardiology Center Agel

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: Ivo Varvařovský, MUDr, Ph.D, Cardiology Center AGEL a.s.

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
November 1, 2016

Primary Completion (Anticipated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
March 1, 2017

Study Completion (Anticipated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
March 1, 2017

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
October 21, 2016

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 25, 2016

First Posted (Estimate)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
October 27, 2016

Study Record Updates

Last Update Posted (Estimate)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
October 27, 2016

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 25, 2016

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
October 1, 2016

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • RG4201601

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Yes

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings