Comparative Study of Biting Force of Injection Molded PEEK and Bre.Flex for Removable Partial Dentures.

January 30, 2017 updated by: Arwa Mabrouk Ayad Issa, Cairo University

Comparative Study Of Biting Force Of Injection Molded PEEK and Bre.Flex Materials For Bounded Removable Partial Dentures (Randomized Clinical Trial)

The aim of the present study is to evaluate the biting force of upper removable partial denture constructed from two different flexible thermoplastic materials.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Unknown

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

The patient will be treated in visits designated as follows:

Visit 1: Preoperative records, clinical, radiographic examination (panoramic and periapical x-rays for evaluation the crown-root ratio, the apical condition of the abutment and their alveolar bone support of abutment) and primary impression will be performed with irreversible hydro-colloid impression material (alginate), The impressions will be poured with type IV dental stone to obtain diagnostic casts .

Visit 2: Maxillary Face-bow will be recorded. The diagnostic casts will be mounted on semi adjustable articulator in centric occluding relation to evaluate the interarch distance and occlusal plane.

Visit 3: primary surveying is performed. Special trays will be constructed and Mouth preparation will be performed by preparing guiding planes and rests seats will be prepared opposing to the edentulous area. Final impression will be taken by elastomeric impression material. The impression will be poured into type IV dental stone in order to obtain master cast. The master cast will be surveyed. The proposed design will be as follows: metal framework base saddle for edentulous areas on both sides connected with palatal strap. Aker's clasp on all abutments with buccal retention.

Visit 4: the metal framework is tried into the patient's mouth. Jaw relation is recorded.

Visit 5: The denture base will be tried in with acrylic teeth in patient's mouth.

Visit 6: the denture base of the partial denture will be processed incorporation with the metal framework into the two different materials to be evaluated. The first group will receive the partial denture in which the metal framework incorporated with the denture base fabricated from PEEK material. The second group will receive the partial denture in which the metal framework incorporated with the denture base material fabricated from BRE-FLEX.

Visit7,8,9: clinical measurement will be performed for one month in three visits.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Anticipated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
20

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

45 years to 55 years (Adult)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • i. All patients must have Kennedy class III modification I upper partially edentulous ridges.

ii. The remaining teeth have good periodontal condition, with no signs of attrition or gingival recession.

iii. Male or female patient with age range (45-55) and in good medical condition iv. All patients have skeletal Angle's class I maxillo-mandibular relationship and have sufficient interarch distance.

v. Free from any systemic or neuromuscular disorder that might affect chewing efficiency of masticatory muscles.

vi. Free from any tempro-mandibular joint disorder. vii. The patients have good oral hygiene and low caries index.

Exclusion Criteria:

  • i. Patients having abnormal habits as bruxism or clenching ii. Patients having hormonal disorders as diabetes, thyroid or parathyroid hormonal diseases were not included.

iii. Teeth with compromised bone support. iv. Patient with xerostomia or excessive salivation. v. Patient with abnormal tongue behavior and/or size.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Other
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Triple

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: group 1
patients will receive partial denture constructed from breflex material
Other: bre.flex

In the recent time thermoplastic materials become quite popular in clinical practice such as nylon and acetal resins. since the 1950, polyamide resin (nylons) provide improved esthetics and reduction of rotational forces on the abutment teeth due to their low elastic modulus(3).

The major disadvantage of a nylon RDP is the inability for a reline procedure and the lack of occlusal rests as well as rigid frameworks, that could lead to occlusal instability and sinking, especially in Kennedy class I and II cases. On the other hand, acetal resins present adequate mechanical strength to form a frame-work more rigid than nylon with retentive clasps, connectors, and supportive elements; however, the acetal resin material lacks natural translucency and vitality.
Experimental: group 2
patients will receive partial denture constructed from PEEK material
Other: PEEK
PEEK has been successfully used over the last years in the medical field, and orthopedics, specifically. which presents high biocompatibility, good mechanical properties, high temperature resistance, and chemical stability due to a 4 GPa modulus of elasticity, it is as elastic as bone and can reduce stresses transferred to the abutment teeth.Additional advantages of this polymer material are elimination of allergic reactions and metallic taste, high polishing qualities, low plaque affinity, and good wear resistance, it has only recently been used in dentistry.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
change in Biting force
Time Frame: 1 month

the change in biting force will be recorded three times. The first week at the time of insertion measuring the biting force immediately after partial denture insertion. The third week measuring biting force of the partial denture. The fourth week measuring biting force of the partial denture.

the biting force will be measured by I-load sensor.
1 month

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cairo University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Anticipated)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
March 1, 2017

Primary Completion (Anticipated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 1, 2017

Study Completion (Anticipated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
October 1, 2017

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
January 26, 2017

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
January 30, 2017

First Posted (Estimate)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
February 1, 2017

Study Record Updates

Last Update Posted (Estimate)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
February 1, 2017

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
January 30, 2017

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
January 1, 2017

More Information

Terms related to this study

Keywords

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 1234 (Department of Defense)

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

UNDECIDED

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Biting

Clinical Trials on bre.flex

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings