Measuring Biting Force of Poly-amide Complete Dentures

August 16, 2017 updated by: Hadeer Hadi, Cairo University

Comparison Between Biting Force of Heat Cured Poly Methylmethacrylate and Metal Reinforced Polyamide for Mandibular Complete Denture

Randomized clinical trial to compare between biting force of mandibular complete denture constructed from two different materials; metal reinforced polyamide and conventional PMMA,The null hypothesis of the study that there will not be a difference between biting force of the complete denture constructed from metal reinforced polyamide and PMMA

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Unknown

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Polyamide resins used in dentistry exhibit high flexibility, physical strength, heat and chemical resistance and the exceedingly rare allergy response. Although flexural strength, modulus of elasticity and rigidity of nylon (polyamide) denture base materials are relatively low, they demonstrate great impact strength, toughness, and resistance to fracture. It was suggested that by adding glass fibers to polyamides, their stiffness and other mechanical properties could be increased. The flexural properties of nylon denture base materials has promoted their usage only in conditions like unyielding undercuts, pronounced tuberosities, tori and bulging alveolar ridges. In 2013 Wadachi etal compared rigidity of polyamide and PMMA when used as a denture base material and concluded that; the modulus of elasticity of polyamide was very low in comparison to PMMA and was lower than ISO standard, and so they recommended that polyamide to be used as a denture base material it should be reinforced with metal frame

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Anticipated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
24

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

  • Name: nadia abbas

Study Locations

  • Egypt
      • Cairo, Egypt, 002
        • Hadeer Hadi

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

45 years to 65 years (ADULT, OLDER_ADULT)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Description

Inclusion Criteria:

  1. Male or female patient with age range from fifty five to sixty five completely edentulous and in good medical condition
  2. Patients have skeletal Angle's class I maxillo-mandibular relationship and sufficient inter arch distance.
  3. Free from any systemic or neuromuscular disorder that might affect chewing efficiency of masticatory muscles.
  4. Free from any tempro-mandibular disease.
  5. Good oral hygiene

Exclusion Criteria:

  1. Neuromuscular disorder and orofacial disease.
  2. Tempromandibular joint and muscle pain
  3. xerostomia or excessive salivation.
  4. Limited mouth opening
  5. Abnormal tongue behavior and/or size.
  6. Intraoral soft and hard tissue pathosis

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: TREATMENT
  • Allocation: RANDOMIZED
  • Interventional Model: PARALLEL
  • Masking: DOUBLE

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
EXPERIMENTAL: Poly-amide
new thermoplastic material used as a denture base, that has excellent ethetics and flexibility
Other: Poly-amide
New denture base material that exhibit high flexibility, physical strength, heat and chemical resistance and the exceedingly rare allergy response
Other Names:
  • Nylon
ACTIVE_COMPARATOR: poly-methyl methacrylate
Polymethylmethacrylate is one of the most widely used denture base material, because of its good biocompatibility, reliability and dimensional stability
Other: Poly-methyl methacrylate
Gold standard denture base material
Other Names:
  • PMMA

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Biting force
Time Frame: One month
Bite force will be measured for both types of complete denture after one month of denture insertion . The recorded force during maximal clenching was obtained with I-load sensor placed between pairs of opposing teeth at one side and wood tongue depressor at the other side. The meter and depressor were located at the area of premolar/molar where there is more number of occlusal contacts with strong determinant of muscle action and subsequent great bite force.
One month

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cairo University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (ANTICIPATED)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
September 1, 2017

Primary Completion (ANTICIPATED)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
March 1, 2018

Study Completion (ANTICIPATED)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
May 1, 2018

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
August 10, 2017

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
August 16, 2017

First Posted (ACTUAL)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
August 18, 2017

Study Record Updates

Last Update Posted (ACTUAL)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
August 18, 2017

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
August 16, 2017

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
August 1, 2017

More Information

Terms related to this study

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • Poly-amide complete dentures

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

UNDECIDED

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Complete Edentulism

Clinical Trials on Poly-amide

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings