Use of Computer Aided Design and 3D Printing for Anesthesiology Management in a Pediatric Patient With Cleft Facial Defect (3D Obturator) - Pilot Trial (Pilobtur)

January 7, 2022 updated by: Petr Štourač, MD, Brno University Hospital

Use of Computer Aided Design and 3D Printing for Anesthesiology Management in a Pediatric Patient With Cleft Facial Defect: Pilot Trial

Congenital malformations of the orofacial area are the most common congenital malformations in children with an incidence of 1.8 children with orofacial cleft per 1000 healthy births in the Czech Republic. The care of children with cleft facial defects is multidisciplinary, centralized and takes place from birth to adulthood. At the University Hospital Brno, the treatment for patients with orofacial cleft is provided by the Cleft Center (CC) of the University Hospital Brno. The main specialties that form the basis of CC include plastic surgery, pediatric anesthesiology and neonatology. Patients with facial cleft defects are divided into 2 main groups based on the embryological causes of clefts: 1/ patients with cleft lip, jaw with or without cleft palate (total cleft) and 2/ patients with isolated cleft soft and hard palate. Anesthesia in children with orofacial clefts is specific not only to the age of the patients, but mainly to the cleft itself. Anesthesiology management, and especially intubation of these patients, are often difficult due to the nature of the defect with high incidence of complications such as difficult airway, desaturation, laryngospasm or bradycardia. In addition, tissue damage including soft tissue of the lip, alveolar arch, palate and nasal septum as well as skeleton of the premaxilla and nasal septum during intubation is seen in approximately 90% of patients. To facilitate intubation, improve anesthesiology management and safety of pediatric patients with orofacial cleft, investigators will develop an individualized protective tray from a silicone material, that will be used during intubation to cover the defect of the alveolar arch and palate. A mold for casting of a protective tray, will be created on a 3D printer on bases of 3D scan. Use of the protective tray would facilitate intubation, decrease anesthesiologic complications and protect soft and hard tissues of the cleft palate and upper jaw during intubation.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

After approval by the Ethics Committee of the Brno University Hospital and registration at clinicaltrials.gov, the study will include patients meeting inclusive criteria for whom primary surgery for a cleft facial defect will be indicated.

Patients will be divided into two groups based on the type of surgery. Group 1 will include patients with unilateral or bilateral cleft lip and alveolus (U/BCLA) or unilateral or bilateral cleft lip, alveolus and palate (total cleft; U/BCLAP) who underwent primary lip reconstruction within 0-3 months of age. Group 2 will include patients with isolated cleft palate (ICP) and patients with U/BCLAP who underwent primary cleft reconstruction between 6 and 18 months of age.

Patients in the pediatric plastic surgery clinic of the Department of Pediatric Surgery, Orthopedics and Traumatology will be randomized with a 1:1 allocation based on the day of operation to the intervention group (3D protective obturator) and the control group (standard procedure without the 3D obturator). Patients enrolled in the intervention group will have an intraoral scan of the palate, alveolar arch, and upper vestibular area before surgery. Based on this 3D visualization of precise anatomical conditions in the oral cavity, a form (negative unique impression of the upper jaw and palato-alveolar conditions) for casting of a protective obturator (splint), used during intubation to cover the defect of the alveolar arch and palate will be created on a 3D printer, in cooperation with the Faculty of Mechanical Engineering (Department of Mechanics of Bodies, Mechatronics and Biomechanics) of Brno University of Technology. For the production of the obturator, a silicone certified for use in the oral cavity will be used.

The main objective of the research will be to find out how the use of a protective obturator (splint) will improve the protection of tissues at the cleft site and whether intubation will be facilitated in pediatric patients with orofacial clefts with congenital atypical anatomical conditions in the oral cavity.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Anticipated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
40

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

Study Locations

  • Czechia
    • South Moravian Region
      • Brno, South Moravian Region, Czechia, 62500
        • Recruiting
        • Brno University Hospital

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

No older than 2 years (Child)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Pediatric patients with unilateral or bilateral cleft lip and alveolus (U/BCLA) or unilateral or bilateral cleft lip, alveolus and palate (total cleft; U/BCLAP) who underwent primary lip reconstruction within 0-3 months of age (most often at our workplace in the neonatal period)
  • Pediatric patients with isolated cleft palate (ICP) and patients with unilateral or bilateral cleft lip, alveolus and palate (U/BCLAP) who underwent primary cleft reconstruction between 6 and 18 months of age.

Exclusion Criteria:

  • unilateral or bilateral cleft lip without cleft alveolus
  • patients with genetically confirmed syndrome disability
  • orofacial cleft patients with associated congenital malformations that may affect the -course of anesthesia (atresia of the choanae)
  • patients with atypical clefts of the face
  • patients with CLA, CLAP, ICP who underwent primary cleft lip reconstruction later than at 3 months of age
  • patients with CLAP and ICP who underwent primary cleft reconstruction later than at 18 months of age
  • patients with submucous cleft palate
  • patients with airways secured preoperatively
  • patients on artificial lung ventilation
  • patients with coagulopathy, thrombocytopenia/thrombocytopathy
  • patients at risk of malignant hyperthermia
  • patients for whom the consent of legal representatives to the research project has not been obtained

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Supportive Care
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
No Intervention: control group
The standard procedure without the 3D obturator.
Experimental: Intervention group (3D protective obturator)
Patients enrolled in the intervention group will have an intraoral scan of the palate, alveolar arch, and upper vestibular area before surgery. Based on this 3D visualization of precise anatomical conditions in the oral cavity, a form (negative unique impression of the upper jaw and palato-alveolar conditions) for casting of a protective obturator (splint), used during intubation to cover the defect of the alveolar arch and palate will be created on a 3D printer, in cooperation with the Faculty of Mechanical Engineering (Department of Mechanics of Bodies, Mechatronics and Biomechanics) of Brno University of Technology. For the production of the obturator, a silicone certified for use in the oral cavity will be used.
Device: 3D Obturator
Based on this 3D visualization of precise anatomical conditions in the oral cavity, a form (negative unique impression of the upper jaw and palato-alveolar conditions) for casting of a protective obturator (splint), used during intubation to cover the defect of the alveolar arch and palate will be created on a 3D printer
Other Names:
  • 3D printer obturator

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Degree of oral tissue injury during intubation
Time Frame: Intraoperatively (after successful intubation)
specifically presence of petechiae, bleeding or soft tissue swelling after intubation in the entire cleft defect area, possibly premaxilla fracture in total cleft patients as a result of manipulation of the laryngoscope in the oral cavity
Intraoperatively (after successful intubation)

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Cormack-Lehane score
Time Frame: Intraoperatively (during intubation)
Evaluation of the laryngoscopic image during intubation evaluated by the Cormack-Lehane score with or without the use of the protective tray. Cormack-Lehane scale range from 1 (ideal view - vocal cords) to 4 (the worst view of aditus laryngis, only the soft palate visible). For proper archiving of the intubation process, a photodocumentation of the laryngoscopic image during intubation will be taken for each patient using a video laryngoscope.
Intraoperatively (during intubation)

Other Outcome Measures

Other Outcome Measures

For clinical trials, a planned measurement described in the protocol that is used to determine the effect of an intervention/treatment on participants. For observational studies, a measurement or observation that is used to describe patterns of diseases or traits, or associations with exposures, risk factors, or treatment. Types of outcome measures include primary outcome measure and secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Number of intubations attempts
Time Frame: Intraoperatively
The number of intubation attempts to secure the airways (first successful intubation = first wave of end-tidal CO2) with and without the use of the protective tray will be evaluated
Intraoperatively
Incidence of associated complications
Time Frame: Intraoperatively
The incidence of associated complications during induction of anesthesia - laryngospasm, bradycardia, severe desaturation < 80 % oxygen saturation oxygen saturation by pulse oximetry pulse oximetry - SpO2 will be assessed
Intraoperatively

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Brno University Hospital

Collaborators

Collaborators

An organization other than the sponsor that provides support for a clinical study. This support may include activities related to funding, design, implementation, data analysis, or reporting.
Masaryk University
Brno University of Technology

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
June 12, 2020

Primary Completion (Anticipated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 1, 2022

Study Completion (Anticipated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
September 1, 2022

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
June 5, 2020

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 5, 2020

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
June 9, 2020

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
January 11, 2022

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
January 7, 2022

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
January 1, 2022

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 3D Obturator Pilot

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Undecided

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Cleft Lip and Palate

Clinical Trials on 3D Obturator

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings