Post-endodontic Pain Survey

September 11, 2020 updated by: Ya-Hsin Yu, DDS, MS

Postoperative Pain After One-visit Root Canal Treatment on Teeth With Vital Pulps: Comparison of Two Different Root Filling Techniques

As part of root canal treatment, canals should be sealed to prevent further contaminations. There are multiple accepted techniques to fill-obturate canals. In the past, different obturation techniques have been compared. The most current technique used, a single cone with bioceramic sealer, has not been compared. This clinical investigation will compare the postoperative pain of this technique to another common technique used in our clinic. Postoperative pain after one-visit root-canal treatment on teeth with vital pulps: Comparison of three different obturation techniques.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
194

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

14 years and older (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Diagnosis of asymptomatic or symptomatic irreversible pulpitis according to AAE consensus. The diagnosis was based on clinical examinations and confirmed upon accessing the teeth.
  • Consenting adults age 18 years and older
  • Non-contributory medical history (ASA Class I & II)
  • Included patients were given oral and written information agreed for participation and signed the informed consent

Exclusion Criteria:

  • Non-consenting patients and patients below 18 years of age
  • Medical history with ASA Class III & IV
  • Non-restorable teeth
  • Teeth with a non-vital pulp
  • Periodontal probing depths were more than 4mm
  • Pre-medication with antibiotics and/or analgesics 24 hours before the treatment
  • Patients taking analgesics routinely for non-dental reasons

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Non-Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Triple

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Obturation technique: WVT
Warm vertical compaction technique (WVT): Teeth filled with AH Plus Jet Root Canal Sealer were filled with .04 taper gutta-percha points by WVT. The sealer was introduced with the master cone. The depth of heated plugger was within 3-5 mm of WL in the WVT group, and the remaining canal space was backfilled with additional sealer and thermoplasticized gutta-percha.
Procedure: Non-surgical root canal treatment filled with WVT
All eligible teeth were isolated with a rubber dam during root canal treatment. The procedures were performed under a microscope (OPMI Pico; Carl Zeiss, Gottingen, Germany). After access, location of canals, and determination of working length (WL) with Root ZX II apex locator (J Morita, Kyoto, Japan), the canals were instrumented using various .04 taper rotary NiTi instruments to a minimum apical size of 35. 4% Sodium hypochlorite was used as the main irrigant with a 31-gauge needle. 17% EDTA was used as the final irrigant. Passive ultrasonic irrigation with size 20 Acteon tip inserted 2mm short of WL was performed with both 4% sodium hypochlorite and 17% EDTA for 10 seconds in each canal. After final irrigation, the canals were dried with paper points. The master gutta-percha cone fit was verified with periapical radiographs before filling the tooth. WVT was used to fill the tooth when the months were January, March, May, July, September, and November.
Active Comparator: Obturation technique: SBT
Sealer-based filling technique (SBT): Teeth filled with SBT were obturated with EndoSequence BC Sealer by injecting the sealer into the coronal third of each canal. Size 30 Lentulo spiral coated with additional sealer was introduced 3 mm short of WL depth at 300rpm. Bioceramic coated gutta-percha was dipped in BC sealer and introduced into the canal to WL. A heated plugger was used to sear the gutta-percha point at each orifice.
Procedure: Non-surgical root canal treatment filled with SBT
All eligible teeth were isolated with a rubber dam during root canal treatment. The procedures were performed under a microscope (OPMI Pico; Carl Zeiss, Gottingen, Germany). After access, location of canals, and determination of working length (WL) with Root ZX II apex locator (J Morita, Kyoto, Japan), the canals were instrumented using various .04 taper rotary NiTi instruments to a minimum apical size of 35. 4% Sodium hypochlorite was used as the main irrigant with a 31-gauge needle. 17% EDTA was used as the final irrigant. Passive ultrasonic irrigation with size 20 Acteon tip inserted 2mm short of WL was performed with both 4% sodium hypochlorite and 17% EDTA for 10 seconds in each canal. After final irrigation, the canals were dried with paper points. The master gutta-percha cone fit was verified with periapical radiographs before filling the tooth. SBT was used to fill the tooth when the months were February, April, June, August, October, and December.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Visual Analogue Scale (VAS)
Time Frame: 4-, 24-, and 48-hour after receiving root canal treatment
Patients were asked to rate the intensity of preoperative pain on a visual analogue scale (VAS) from 0 (no pain) to 10 (worst pain ever) before receiving root canal treatment. At the end of the visit, the patients were given a survey and asked to rate the intensity of postoperative pain (VAS 0-10) at 4 hours, 24 hours, and 48 hours after the procedure.
4-, 24-, and 48-hour after receiving root canal treatment

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Ya-Hsin Yu, DDS, MS

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
November 1, 2016

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
May 1, 2018

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
May 1, 2018

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
June 24, 2020

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
July 6, 2020

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
July 8, 2020

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
October 1, 2020

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
September 11, 2020

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
September 1, 2020

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 825494

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Undecided

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings