Analyzing the Effect of Air Polishing on Tooth Surfaces With Two Imaging Methods

January 5, 2022 updated by: Vecihe Merve Balta Uysal, Kocaeli University

Analyzing the Effect of Sodium Bicarbonate and Glycine Air Polishing on Tooth Surfaces With Two Different Imaging Methods

Micro-CT is a non-destructive imaging method with high resolution and allows to examine all tooth structures individually. Pre- and post-application images obtained by micro-CT can be superimposed and differences can be precisely detected. Intraoral scanners in CAD/CAM systems also provide non-destructive image scanning. CAD/CAM are systems that are widely used in dentistry today. Access to the device is easier than micro-CT. This study was focused on to compare two different imaging methods by assessing changes caused by sodium bicarbonate and glycine air polishing on the tooth surfaces.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

The patients were recruited from individuals seeking periodontal and/or dental treatment at Kocaeli University, Faculty of Dentistry. The teeth samples were collected from the participants who have a single-rooted tooth with the gingival recession on all surfaces and need to be extracted. All patients who met the criteria were informed about the study. Patients who gave written informed consent were included. Before the teeth extractions, root surfaces were marked with a bur at the level of the gingival margin. Extractions were performed under local anesthesia with 2% xylocaine adrenalin. Fourteen single root extracted teeth were included into the study. The crown and exposed root surface were air polished using glycine and sodium bicarbonate powders at instrumentation time of 5s, combinations of medium and maximum power and medium water settings, distance of 5mm and angulation of 60 degree.

Samples were scanned before and after air polishing with a high-resolution micro-CT device. The scanning conditions were 100 kVp; 100-mA, 0.5-mm Al/Cu filter; 13.1-μm pixel size; and rotation at 0.2 steps. According to the manufacturer's instructions, each sample was rotated 360°. The mean scanning time was around 1hour. The teeth surfaces were digitalized before and after air polishing with an intraoral scanner. The mean scanning time was around 10 second. The virtual images of the scanned teeth were saved in stereolithography (STL) format. The defect volume was estimated.

The data were analyzed using commercially available statistical analysis software. Descriptive statistics that were used to analyze the results included the mean, standard deviation, median, minimum, and maximum. Mann-Whitney U test was performed to compare differences between two independent variables. Wilcoxon test was used to compare differences between two dependent variables. P-values less than 0.05 were considered statistically significant.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Observational

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
14

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Turkey
      • Kocaeli, Turkey, 41190
        • Kocaeli University, Faculty of Dentistry

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

18 years and older (Adult, Older Adult)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Sampling Method

Non-Probability Sample

Study Population

The patients were recruited from individuals seeking periodontal and/or dental treatment at Kocaeli University, Faculty of Dentistry.

Description

Inclusion Criteria:

Being older than age of 18, Willing to participate the study, To have a single rooted tooth with gingival recession on all surfaces and need to be extracted, The tooth has to be free of caries, defects and restorations.

Exclusion Criteria:

Have history of infectious diseases like Hepatitis and/or HIV (+).

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

Cohorts and Interventions

Group / Cohort

Group / Cohort

A group or subgroup of participants in an observational study that is assessed for biomedical or health outcomes.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Micro-CT
Samples were scanned before and after air polishing with a high-resolution micro-CT device. The scanning conditions were 100 kVp; 100-mA, 0.5-mm Al/Cu filter; 13.1-μm pixel size; and rotation at 0.2 steps. According to the manufacturer's instructions, each sample was rotated 360°. The mean scanning time was around 1hour.
Device: Micro-CT
Micro computed tomography (micro-CT) is an imaging method in which cross-sectional images are obtained and these images are transferred to the computer through specific software, processed and stored.
CAD/CAM
The teeth surfaces were digitalized before and after air polishing with an intraoral scanner. The mean scanning time was around 10 second. The virtual images of the scanned teeth were saved in stereolithography (STL) format.
Device: CAD/CAM
CAD/CAM (computer aided design-computer aided manufacturing) is a production method that is frequently used in many areas of technology. These systems are composed of a data acquisition unit, software for designing virtual restoration, and a computerized milling device.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Defect volume
Time Frame: 5 second
The teeth were divided into two groups, the crown and exposed root surface were air polished using glycine and sodium bicarbonate powders at instrumentation time of 5s, combinations of medium and maximum power and medium water settings, distance of 5mm and angulation of 60 degree. Samples were scanned in a micro-computed tomography (micro-CT) and CAD/CAM at baseline and then after powder treatment and the defect volume was estimated.
5 second

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Kocaeli University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
June 17, 2020

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 17, 2020

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
September 14, 2020

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
January 5, 2022

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
January 5, 2022

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
January 19, 2022

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
January 19, 2022

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
January 5, 2022

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
January 1, 2022

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • KOU GOKAEK 2020/08.07

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

Yes

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings