Validation of a Digitalised Intraoral Protection (NUPPIA)
Validation of a Generic Procedure for the Fabrication of a Custom-made Intra-oral Protection Using an Inter-arch Piece
Type III (custom-made) intra-oral protection (IOP) models represent 13% of IOP worn by amateur rugby club players in France.
However, this model is recognized as the most effective when made in accordance with essential health and safety requirements.
This observation is at the origin of a new approach that the investigators are proposing with the objective of removing the barriers to access to custom-made IOP. This research is based on the combination of new digital technologies, scanning and 3D printing, to develop a new generation of IOP.
This project aims to show the interest of this new generation of "modified unimaxillary" IOP on the ventilation of the athletes and his/her comfort when he/she evolves with his IOP in place
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Detailed Description
Type III (custom) Intra Oral Protection (IOP) models represent 13% of IOP worn by amateur rugby players in France.
However, this model is recognized as the most effective when made in accordance with essential health and safety requirements.
This under-utilization can be explained by the existence of many barriers to the diffusion of custom-made IOP:
- Organizational barrier: long fabrication procedure (minimum 3 sessions) requiring qualified people (dental surgeon, dental technician), trained in the technique of making custom IOP and in essential health and safety criteria.
- Financial barrier: high cost with a selling price of 200€ to 300€ per unit.
Technical barriers:
- Difficulties in making custom-made IOP for athletes who wear fixed braces (brackets and wire),
- Difficulties in improving the impact energy dissipation capacity without affecting the absorption capacity of the custom-made IOP,
- Difficulties in individualizing and characterizing the IOP.
This observation is at the origin of a new approach proposed in order to remove the barriers to access to custom IOP. Naturally, this project relies on the combination of new digital technologies, scanning and 3D printing, to develop a new generation IOP with :
- A simpler and shorter procedure,
- A target price accepted by athletes,
- "French Association for Standardization"(AFNOR) standards guaranteed,
- Compatibility with fixed orthodontic treatments,
- Ability to develop new protection strategies,
- Ability to improve the athlete's comfort. Currently, the IOP resulting from these technologies are mainly "unimaxillary", i.e. without engagement of the mandibular dental arch and without ventilation space. In order to comply with the Afnor XP S72-427 standard, the project proposes the fabrication of two models of "modified unimaxillary" IOP that ensure the engagement of the mandibular dental arch and the creation of a ventilation space at two different heights, 4mm and 6mm. This project aims to show the interest of this new generation of "modified unimaxillary" IOP on the athlete's ventilation and his comfort when he evolves with his IOP in place. It is based on a population of men and women, minors and adults, practicing a sport at risk of oral trauma and uses a methodology already proven by the research team.
Study Type
Study Type
Enrollment (Estimated)
Enrollment
Phase
Phase
- Not Applicable
Contacts and Locations
Study Contact
Study Contact
- Name: Philippe POISSON, Dr
- Phone Number: 0557656590
- Email: philippe.poisson@chu-bordeaux.fr
Study Locations
-
-
-
Bordeaux, France
- Not yet recruiting
- CHU de Bordeaux
-
Contact:
- Philippe POISSON, Dr
- Email: philippe.poisson@chu-bordeaux.fr
-
Bordeaux, France
- Recruiting
- CREPS de Bordeaux
-
Contact:
- Serge LISE, Dr
- Email: serge.lise@creps-bordeaux.fr
-
Paris, France
- Not yet recruiting
- Institut national du sport, de l'expertise et de la performance (INSEP)
-
Contact:
- Sébastien LE GARREC, Dr
- Email: sebastien.legarrec@insep.fr
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
- Child
- Adult
Accepts Healthy Volunteers
Description
Inclusion Criteria:
- Subjects between the ages of 16 and 35,
- Subject affiliated to a social security system,
- Subject affiliated with the French Federation of Boxing or Rugby or Football
- Subject having signed a consent form
- For minors, legal guardians having signed the free and informed consent form
Exclusion Criteria:
Subject with a pathology incompatible with the realization of the trial:
- Absolute contraindications: Recent infarction (wait 5 to 12 days depending on severity), Threat syndrome (lawful test after stabilization - at least 3 days without spontaneous seizures), Resting BP > 200/120 mmHg, Uncompensated heart failure, Third-degree Atrioventricular block, Myocarditis, Pericarditis, Endocarditis, Aortic Dissection, Intracardiac tumor or thrombus, Deep venous thrombosis, Pulmonary Embolism,
- Relative contraindications: Aortic stenosis (formal contraindication if lipothymia, syncope or signs of heart failure), Severe non-revascularized coronary artery disease, Pulmonary arterial hypertension (formal contraindication if primary), Severe rapid ventricular or supraventricular arrhythmias
- Subject under B-mimetic drug treatment,
- Subject with decaying teeth,
- Subject under court protection,
- Subject participating in another research study,
- Subject in pregnancy.
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Other
- Allocation: N/A
- Interventional Model: Single Group Assignment
- Masking: None (Open Label)
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Experimental: Athlete
healthy, adult or minor (16 years or older), high-level sportsmen and women, volunteers
|
Manufacture of custom-made "unimaxillary" and "modified unimaxillary" intra-oral protection (IOP) with vertical dimensions of 4 mm and 6 mm. 3D modeling of a IOP based on:
Realization of a ventilation test (VO2max) to determine the Maximum Aerobic Speed (MAS). Measurement of ventilatory parameters without IOP and with each IOP :
Collection from participants (self-questionnaire)
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Ventilatory flow per minute
Time Frame: 3 weeks (W3) after inclusion (W0)
|
The ventilatory flow rate per minute will be measured during the ventilation test
|
3 weeks (W3) after inclusion (W0)
|
Secondary Outcome Measures
Secondary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Confort level
Time Frame: 3 weeks (W3) after inclusion (W0)
|
For the evaluation of the comfort level of wearing the IOP, eleven judgement criteria are proposed and evaluated using a visual analogue scale graduated from 0 (uncomfortable) to 10 (very comfortable): retention, muco-gingival aspect, height of mouth opening, volume of the PIB, nausea, phonation, open mouth ventilation, clenched jaw ventilation, salivation, masticatory muscles, temporomandibular joint.
|
3 weeks (W3) after inclusion (W0)
|
Collaborators and Investigators
Sponsor
Sponsor
Study record dates
Study Major Dates
Study Start (Actual)
Study Start
Primary Completion (Estimated)
Primary Completion
Study Completion (Estimated)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Actual)
First Posted
Study Record Updates
Last Update Posted (Actual)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Other Study ID Numbers
Other Study ID Numbers
- CHUBX 2022/61
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
product manufactured in and exported from the U.S.
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.