Evaluation of Digital 3D Printed Temporary Removable Partial Denture.

October 27, 2023 updated by: Medhat Sameh Shehata Abdelaziz, Cairo University

Oral Health-Related Quality of Life and Retention in Digitally Versus Conventionally Fabricated Flexible Removable Partial Dentures in Maxillary Class III Modification 1 Patients: A Cross-over Randomized Clinical Trial

This study aims to compare oral health-related quality of life and retention between digitally- fabricated temporary flexible RDPs and conventionally-fabricated temporary flexible RDPs.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Estimated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
13

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Locations

  • Egypt
      • Giza, Egypt
        • Recruiting
        • Faculty of Dentistry , Cairo University
        • Contact:

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • Maxillary Class III, modification I partially edentulous patients that enables measuring the retention values intraorally without denture rotation.
  • Fully dentulous or partially edentulous opposing mandibular arch.
  • Patients that require temporary partial dentures for aesthetic reasons or as an interim denture during mouth rehabilitation treatment or after implant placement.
  • Age range (30-55 years).
  • Cooperative patients that are willing to attend all follow-up periods.
  • Patients with healthy attached mucosa of appropriate thickness free from any inflammation.
  • Patients with healthy abutments and healthy periodontium and no more than grade I mobility.

Exclusion Criteria:

  • Patients with Parkinson's disease
  • Patients with xerostomia.
  • Patients with a history of allergy to dentures made of resins.
  • Patients with pathological changes of residual ridges as recurrent or persistent ulcers, osteomyelitis and infections.
  • Patients with large irregular bony exostosis.
  • Patients with medical or psychological conditions as physical disability or mental retardation that hinder cooperation in the follow up visits and answering the questionnaires.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: The conventional heat pressing temporary flexible maxillary removable partial denture
Procedure: The conventional heat pressing temporary flexible maxillary removable partial denture
An intraoral scan will be made for each patient's maxillary and mandibular jaws in addition to digital bite registration using (Medit i700; Medit corp.) the resultant data will be exported in the form of a Standard Tessellation Language (STL) file. The denture base and the teeth will be designed using computer-aided design software (Partial Cad, Dental CAD software). Each patient will receive two RDPs, fabricated with two different manufacturing techniques. Based on randomization, the patients will start by receiving either partial denture that is fabricated by conventional heat pressing technique of 3D printed castable resin (Cast V1resin) followed by partial denture that is fabricated by 3D printing of printable resin (Flexo denture base, resin) and teeth (permanent crown,resin) or the other way around. In 3D-printed RDP, the artificial teeth will be attached to the fabricated denture bases using printable denture base resin material
Experimental: 3D-printed and digitally designed temporary flexible maxillary removable partial denture .
Procedure: 3D-printed and digitally designed temporary flexible maxillary removable partial denture
3D-printed and digitally designed temporary flexible maxillary removable partial denture

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Oral health-related quality of life.
Time Frame: Baseline and 6 months
Oral health impact profile (OHIP 14) questionnaire will be used to asses the oral health-related quality of life
Baseline and 6 months
Retention of a removable partial denture
Time Frame: Baseline and 6 months
The retention will be measured using Digital Force Gauge attached to the denture polished surface while the patient is in supine position
Baseline and 6 months

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cairo University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
June 2, 2023

Primary Completion (Estimated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 2, 2024

Study Completion (Estimated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
August 30, 2024

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
October 24, 2023

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 27, 2023

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
October 30, 2023

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
October 30, 2023

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 27, 2023

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
October 1, 2023

More Information

Terms related to this study

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 7-7-23

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings