3D Printed vs Ready-to-Wear Insoles for Diabetic Neuropathy (3DP-DPN)

June 14, 2026 updated by: Anbreena Rasool, University of Faisalabad

Comparative Effect of 3D Printed Customized Insoles and Ready to Wear Insoles on Plantar Pressure Changes in Patients With Diabetic Neuropathy

Diabetic neuropathy is a condition caused by chronic high blood glucose levels that damage nerves over time, frequently causing abnormal plantar pressure and increasing the risk of foot ulcers and impaired mobility. Insoles are widely used to redistribute pressure and improve comfort. This study compares the effect of 3D printed customized insoles versus ready-to-wear insoles on plantar pressure changes in patients with diabetic neuropathy. The study is a randomized controlled trial with 22 participants randomly allocated to two groups: one receiving 3D printed customized insoles and the other receiving ready-to-wear insoles. Plantar pressure is measured using piezoresistive sensors and an Arduino Nano Unit. Secondary outcomes include foot health status (FSHQ questionnaire), satisfaction with assistive technology (QUEST 2.0), and neuropathy severity (NSS and NDS questionnaires). Assessments occur at baseline, 4 weeks, and 8 weeks.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Active, not recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

This is a single-blind, parallel-group randomized controlled trial conducted at DHQ-1 and DHQ-2 hospitals in Okara, Pakistan. Participants are adults aged 35-65 years with diagnosed diabetic neuropathy who can walk independently without aids. Exclusion criteria include foot ulcers, external wounds, recent surgery, major limb amputation, foot drop, peripheral vascular disease, neuromuscular diseases, and Charcot arthropathy. A consecutive sampling technique is used to recruit 22 participants. Randomization is performed using a computer-generated sequence. Participants are blinded to their group allocation. Group A receives 3D printed customized insoles tailored to individual foot morphology using 3D scanning and printing technology. These insoles provide arch support and gait alignment. Group B receives ready-to-wear insoles providing general cushioning and basic support. Both groups follow an 8-week intervention protocol: participants wear insoles for a minimum of 6 hours per day, 5 days per week, and perform level walking on a 28-meter pathway at self-selected speed. The protocol is divided into phases: weeks 1-2 for acclimatization and footwear assessment using Semmes-Weinstein 10g monofilament; weeks 3-4 for pressure adaptation and skin monitoring; weeks 5-6 for enhanced foot function and balance improvement; weeks 7-8 for final assessment. Primary outcome: plantar pressure measured via piezoresistive sensors and Arduino Nano Unit. Secondary outcomes: Foot Health Status Questionnaire (FSHQ), Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0), Neuropathy Symptom Score (NSS), and Neuropathy Deficit Score (NDS). Data are collected at baseline, week 4, and week 8. Statistical analysis uses SPSS version 22.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Estimated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
22

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Pakistan
    • Punjab Province
      • Faisalābad, Punjab Province, Pakistan, 3800
        • The University of Faisalabad

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

No

Description

Inclusion Criteria:

  • Age 35 to 65 years
  • Diagnosed with diabetes mellitus
  • Clinical diagnosis of diabetic peripheral neuropathy
  • Ability to walk independently without walking aids
  • Normal cognitive function
  • Corrected or uncorrected vision sufficient for safe ambulation
  • Willingness to provide written informed consent

Exclusion Criteria:

  • Presence of active foot ulcer
  • External wound on lower extremity
  • History of lower limb surgery within past 6 months
  • Major lower limb amputation
  • Foot drop
  • Peripheral vascular disease
  • Neuromuscular diseases (e.g., stroke, Parkinson's disease, multiple sclerosis)
  • Charcot arthropathy
  • Inability to comply with study protocol

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Group A: 3D Printed Customized Insoles
Participants in this group receive 3D printed customized insoles tailored to individual foot morphology. Insoles are designed to provide arch support and gait alignment. Participants wear insoles for minimum 6 hours/day, 5 days/week for 8 weeks, following a phased protocol of acclimatization, pressure adaptation, and function improvement.
Device: 3D Printed Customized Insole
3D printed customized insoles are fabricated using 3D scanning of the participant's foot to capture individual morphology. The insoles are printed using thermoplastic polyurethane (TPU) or similar 3D printing filament. The intervention involves daily wear of insoles for minimum 6 hours per day, 5 days per week, for 8 weeks. Participants perform level walking on a 28-meter pathway at self-selected speed. Weekly assessments monitor adherence, skin condition, and comfort. Patient education on foot care and insole use is provided.
Device: Ready-to-Wear Insole
Ready-to-wear insoles are prefabricated insoles providing general cushioning and shock absorption. These insoles are not customized to individual foot morphology. The intervention involves daily wear of insoles for minimum 6 hours per day, 5 days per week, for 8 weeks. Participants perform level walking on a 28-meter pathway at self-selected speed. Weekly assessments monitor adherence, skin condition, and comfort. Patient education on foot care and insole use is provided.
Active Comparator: Group B: Ready-to-Wear Insoles
Participants in this group receive prefabricated ready-to-wear insoles providing general cushioning and basic support. Participants wear insoles for minimum 6 hours/day, 5 days/week for 8 weeks, following the same phased protocol as the experimental group.
Device: Ready-to-Wear Insole
Ready-to-wear insoles are prefabricated insoles providing general cushioning and shock absorption. These insoles are not customized to individual foot morphology. The intervention involves daily wear of insoles for minimum 6 hours per day, 5 days per week, for 8 weeks. Participants perform level walking on a 28-meter pathway at self-selected speed. Weekly assessments monitor adherence, skin condition, and comfort. Patient education on foot care and insole use is provided.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Change in Plantar Pressure Distribution
Time Frame: Baseline (Week 0), Mid-intervention (Week 4), Post-intervention (Week 8)
Plantar pressure is measured using piezoresistive sensors connected to an Arduino Nano Unit. Participants walk barefoot across the sensor platform. The sensor records pressure distribution across the plantar surface in kilopascals (kPa). Higher pressure values indicate greater plantar load, which is associated with increased risk of foot ulceration. Lower pressure values indicate better offloading.
Baseline (Week 0), Mid-intervention (Week 4), Post-intervention (Week 8)

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Foot Health Status Questionnaire (FSHQ) Score
Time Frame: Baseline (Week 0), Week 4, Week 8
The Foot Health Status Questionnaire (FSHQ) is a validated instrument assessing foot-related quality of life. It includes domains of foot pain, foot function, footwear, and general foot health. Each item is scored on a Likert scale. Minimum score is zero and maximum score is 100. scores are generally classified into ranges such as Very Low: 0-24.9 Low:25-49.9 Medium: 50-74.9 High: 75-100 HIgher score indicates better foot health and lower score indicates worst foot health.
Baseline (Week 0), Week 4, Week 8

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
University of Faisalabad

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
January 1, 2026

Primary Completion (Estimated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
June 30, 2026

Study Completion (Estimated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
July 15, 2026

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
June 6, 2026

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 6, 2026

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
June 11, 2026

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
June 17, 2026

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 14, 2026

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
June 1, 2026

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • TUF/EIRB/ 195 /26

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings