Denne side blev automatisk oversat, og nøjagtigheden af ​​oversættelsen er ikke garanteret. Der henvises til engelsk version for en kildetekst.

3D Printed Reverse Twin Block for Class III Malocclusion (3DRTB)

14. juli 2026 opdateret af: Linda Basim, University of Baghdad

Effectiveness of a Novel 3D Printed Reverse Twin Block in The Management of Maxillary Deficiency of Class III Malocclusion: A Randomized Clinical Trial

This RCT aims to evaluate the effectiveness of a novel 3D printed reverse twin block appliance in the management of maxillary deficiency in growing patients having class III malocclusion. The clinical outcomes of this appliance will be compared with the conventional reverse twin block appliance over 6 months treatment period.

primary objective is evaluating of the effectiveness of 3DRTB in correcting sagittal discrepancies due to maxillary deficiency in class III malocclusion compared to conventional one while secondary objectives are assessment of transverse and vertical jaw relationship produced by 3DRTB compared to CRTB and to evaluate the soft tissue profile of class III patients and to evaluate the maxillary and mandibular incisor inclination, also assessment of patient perception with both appliances by using questionnaire and finally to assess the impact of 3DRTB on oral health compared to CRTB by using oral hygiene index.

Studieoversigt

Status

Rekruttering

Betingelser

Intervention / Behandling

Undersøgelsestype

Interventionel

Tilmelding (Anslået)

30

Fase

  • Ikke anvendelig

Kontakter og lokationer

Dette afsnit indeholder kontaktoplysninger for dem, der udfører undersøgelsen, og oplysninger om, hvor denne undersøgelse udføres.

Studiekontakt

Studiesteder

  • Irak
      • Baghdad, Irak
        • Rekruttering
        • Collage of Dentistry, University of Baghdad

Deltagelseskriterier

Forskere leder efter personer, der passer til en bestemt beskrivelse, kaldet berettigelseskriterier. Nogle eksempler på disse kriterier er en persons generelle helbredstilstand eller tidligere behandlinger.

Berettigelseskriterier

Aldre berettiget til at studere

  • Barn

Tager imod sunde frivillige

Ingen

Beskrivelse

Inclusion Criteria:

  1. The age group selected is mixed dentition group 8-13 years with residual potential maxillary growth. Patient maturity will be assessed using the Cervical Vertebral Maturation (CVM) method on lateral cephalogram, patients in CS1-CS3 stages will be included to ensure remaining maxillary growth.
  2. Presence of permanent first molar with lower anterior teeth to retain the appliance.

  3. Skeletal/dental class III tendency with anterior cross bite or reverse overjet: a. Clinically the overjet is equal or less than zero up to -3 mm.

    b. Cephalometric ANB angle equal or less than zero up to -3 degrees and Wits appraisal ≤ -2.

  4. Prescence of unilateral or bilateral posterior crossbite.
  5. Mild to moderate anterior crowding.
  6. Acceptable oral hygiene baseline defined by oral hygiene index (OHI). -

Exclusion Criteria:

  1. Patients with cleft lip and palate and/or craniofacial anomalies.
  2. History of previous orthopedic and/or orthodontic treatment.
  3. Presence of uncontrolled systemic disease or medically compromised status.
  4. Uncooperative patient/parents.

Studieplan

Dette afsnit indeholder detaljer om studieplanen, herunder hvordan undersøgelsen er designet, og hvad undersøgelsen måler.

Hvordan er undersøgelsen tilrettelagt?

Design detaljer

  • Primært formål: Behandling
  • Tildeling: Randomiseret
  • Interventionel model: Parallel tildeling
  • Maskning: Ingen (Åben etiket)

Våben og indgreb

Deltagergruppe / Arm
Intervention / Behandling
Eksperimentel: 3D printed Reverse Twin Block appliance
patients with class III malocclusion will receive a novel 3D printed reverse twin block with expansion screw for expansion and protraction of maxilla and will be digitally designed using CAD software and fabricated using photopolymer resin.
Enhed: 3D printed Reverse Twin Block appliance
a CAD-CAM novel reverse twin block appliance will be used for orthopedic management of maxillary deficiency in growing patients with class III malocclusion.
Aktiv komparator: Conventional Reverse Twin Block appliance
patients with class III malocclusion will receive a conventional reverse twin block with expansion screw for expansion and protraction of maxilla and will be fabricated from acrylic resin.
Enhed: Conventional Reverse Twin Block appliance
a conventionally fabricated Reverse Twin Block appliance will be used for correction of maxillary deficiency in growing patients with class III malocclusion

Hvad måler undersøgelsen?

Primære resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Sagittal and vertical relationship by cephalometric radiograph.
Tidsramme: T0 baseline records T1 3 months after initiation of treatment T2 6 months after initiation of treatment
Skeletal changes (SNA, SNB, ANB, Wits appraisal, SN-Pog angle TAFH, TPFH, mandibular plane angle, facial plane angle, facial taper angle, facial axis angle, maxillary convexity, saddle angle).
T0 baseline records T1 3 months after initiation of treatment T2 6 months after initiation of treatment

Sekundære resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Transverse relationship by Study model
Tidsramme: T0 baseline records T1 after 3 months T2 after 6 months

This will measure by scanned digital study model to calculate the amount of expansion at T0, T1, T2.

  1. Intermolar width: which is the distance between the mesiobuccal cusp tips of the right and left maxillary first molars.
  2. Arch length: Arch length will be achieved by measuring the summation of right and left lines that passing through the midpoint between the distal surfaces of the deciduous second molar or the first permanent molar to the midpoint between the central incisors.
T0 baseline records T1 after 3 months T2 after 6 months

Andre resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Oral hygiene index-children (OHI-C) will be measured
Tidsramme: T0 baseline record T1 after 3 months T2 after 6 months

The six index teeth that will be included:

  1. 16/55: Maxillary right permanent first molar or maxillary right primary second molar.
  2. 11/51: Maxillary right permanent central incisor or maxillary right primary central incisor.
  3. 26/65: Maxillary left permanent first molar or maxillary left primary second molar.
  4. 36/75: Mandibular left permanent first molar or mandibular left primary second molar.
  5. 31/71: Mandibular left permanent central incisor or mandibular left primary central incisor.
  6. 46/85: Mandibular right permanent first molar or mandibular right primary second molar.
T0 baseline record T1 after 3 months T2 after 6 months

Samarbejdspartnere og efterforskere

Det er her, du vil finde personer og organisationer, der er involveret i denne undersøgelse.

Sponsor

University of Baghdad

Datoer for undersøgelser

Disse datoer sporer fremskridtene for indsendelser af undersøgelsesrekord og resumeresultater til ClinicalTrials.gov. Studieregistreringer og rapporterede resultater gennemgås af National Library of Medicine (NLM) for at sikre, at de opfylder specifikke kvalitetskontrolstandarder, før de offentliggøres på den offentlige hjemmeside.

Studer store datoer

Studiestart (Faktiske)

10. juni 2026

Primær færdiggørelse (Anslået)

31. december 2026

Studieafslutning (Anslået)

30. juni 2027

Datoer for studieregistrering

Først indsendt

1. juli 2026

Først indsendt, der opfyldte QC-kriterier

14. juli 2026

Først opslået (Faktiske)

17. juli 2026

Opdateringer af undersøgelsesjournaler

Sidste opdatering sendt (Faktiske)

17. juli 2026

Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier

14. juli 2026

Sidst verificeret

1. juni 2026

Mere information

Begreber relateret til denne undersøgelse

Yderligere relevante MeSH-vilkår

Andre undersøgelses-id-numre

  • 1213426

Plan for individuelle deltagerdata (IPD)

Planlægger du at dele individuelle deltagerdata (IPD)?

INGEN

Lægemiddel- og udstyrsoplysninger, undersøgelsesdokumenter

Studerer et amerikansk FDA-reguleret lægemiddelprodukt

Ingen

Studerer et amerikansk FDA-reguleret enhedsprodukt

Ingen

Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .

Kliniske forsøg med Klasse III malocclusion

Kliniske forsøg med 3D printed Reverse Twin Block appliance

Søg i lignende forsøg

Sponsorer og samarbejdspartnere

Medicinske tilstande

Narkotikainterventioner

CROs by country

CROs in Australia

Betingelser

Sjældne sygdomme

Narkotikainterventioner

Kosttilskud

Sponsor / samarbejdspartnere

Placeringer

3
Abonner