Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

3D Modeling to Improve Hip Arthroscopy Outcomes

8. September 2021 aktualisiert von: The Hawkins Foundation

The Use of Patient-Specific 3D Printed Anatomic Models in Pre-Operative Planning and Patient Engagement to Improve Hip Arthroscopy Outcomes

This study will pilot the use of 3D printed models of the hip, for use in pre-operative planning and patient communication to improve clinical outcomes and patient engagement. This method will be implemented in the setting of femoroacetabular impingement (FAI), with the goal of identifying and measuring specific anatomical pathologies and impingement (range of motion) risks, to communicate a pre-operative plan to both the surgical team, and the patient.

Studienübersicht

Status

Beendet

Bedingungen

Intervention / Behandlung

Detaillierte Beschreibung

Following a standard of care pre-operative CT scan, a 3D rendering of the CT scan will be completed. The de-identified CT Scan data will be transferred to the Clemson University Bioengineering Department, and a 3D modeling software will convert it to a computer model that will then be 3D printed. During the doctor-patient pre-operative consultation, the 3D Printed model will be used to assist the doctor in describing the patient's pathology and upcoming surgical procedure. In this pilot study, the surgeon will make measurements and estimates of resection for the femoroplasty and acetabuloplasty off of 2D CT scan, MRI, and x-rays. This will then be compared quantitatively to the results of the 3D model/3D printing measurements. Surgeon debriefings will occur postoperatively to determine the benefit of the model and how well it matched up to what the surgeon experienced during the surgery.

FAI involves complex anatomic morphology which can be unique to each patient. A thorough understanding of the type and specifically location of impingement is paramount to successful results if surgery is required. 2D imaging has limitations when analyzing a 3D anatomic lesion. 3D printed hip models have the potential to provide superior preoperative planning and subsequent surgical results. In addition, 3D models can potentially improve patient understanding, expectations, and outcomes.

Studientyp

Beobachtungs

Einschreibung (Tatsächlich)

2

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienorte

    • South Carolina
      • Greenville, South Carolina, Vereinigte Staaten, 29615
        • Steadman Hawkins Clinic of the Carolinas - Greenville Health System

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

18 Jahre und älter (Erwachsene, Älterer Erwachsener)

Akzeptiert gesunde Freiwillige

Ja

Studienberechtigte Geschlechter

Alle

Probenahmeverfahren

Nicht-Wahrscheinlichkeitsprobe

Studienpopulation

The subject will be approached for participation in this study after the subject has made the decision to undergo a hip arthroscopy procedure and will be receiving a standard of care hip CT Scan. Patients who meet all criteria will be offered enrollment into the study.

Beschreibung

Inclusion Criteria:

  • Surgical candidate for a hip arthroscopy for the treatment of femoroacetabular impingement
  • Subject is willing to sign the informed consent.
  • Subject is at least 18 years of age.

Exclusion Criteria (n/a)

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Resection Measurement Variations
Zeitfenster: Pre-operative through date of surgery: Resection measurements will be collected intra-operatively and compared to the pre-operative estimations.
The surgeon will make estimates of resection for the femoroplasty and acetabuloplasty based on standard pre-operative imaging (in millimeters). The surgeon will also make estimates based on the 3D model/3D printing measurements. Actual resection measurements will be collected intra-operatively and compared to the surgeon's pre-operative predictions based on the 3D model and the standard imaging techniques (in millimeters).
Pre-operative through date of surgery: Resection measurements will be collected intra-operatively and compared to the pre-operative estimations.

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Tatsächlich)

1. November 2020

Primärer Abschluss (Tatsächlich)

16. April 2021

Studienabschluss (Tatsächlich)

16. April 2021

Studienanmeldedaten

Zuerst eingereicht

18. Juni 2019

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

19. Juni 2019

Zuerst gepostet (Tatsächlich)

24. Juni 2019

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

16. September 2021

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

8. September 2021

Zuletzt verifiziert

1. September 2021

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Andere Studien-ID-Nummern

  • Pro00086834

Plan für individuelle Teilnehmerdaten (IPD)

Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?

NEIN

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .

Klinische Studien zur Femoroacetabuläres Impingement

Klinische Studien zur 3D Hip Model from Pre-operative CT scan

Suchen Sie nach ähnlichen Studien