Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

Effectiveness of Clear Aligner Systems in Mixed Dentition Maxillary Transverse Deficiency

10. Mai 2026 aktualisiert von: Celal Irgin, TC Erciyes University

Comparison of the Effectiveness of Different Clear Aligner Systems in Patients With Maxillary Transverse Deficiency During the Mixed Dentition Period: An In-Vivo Randomized Controlled Clinical Trial

he primary aim of this study is to compare the dentoalveolar and skeletal effects of arch expansion using an in-house clear aligner system, produced chairside with an indirect manufacturing technique, and commercially available clear aligner systems (Invisalign) in patients during the mixed dentition period.

Participants will be allocated into five groups: Group A-In-house aligners (5-day activation protocol), Group B-In-house aligners (2-day activation protocol), Group C-Invisalign First aligners, Group D-Invisalign Palatal Expander, and Group E-untreated control group.

Before treatment, demographic data, dental models, intraoral and extraoral photographs, radiographic images, and clinical measurements will be collected. Skeletal measurements, including maxillary and nasal widths, will be evaluated using posteroanterior cephalometric radiographs. Digital models of the maxilla and mandible will be obtained using an intraoral scanner and used for dental measurements before and after treatment.

Secondary outcomes include evaluation of facial soft tissue changes using stereophotogrammetry (3DMD), assessment of white spot lesions using quantitative light-induced fluorescence (QLF), and analysis of patient compliance using the Orthodontic Patient Cooperation Scale. In addition, changes in body mass index (BMI), maxillary-mandibular transverse discrepancies, and appliance wear time will be evaluated.

Studienübersicht

Status

Aktiv, nicht rekrutierend

Bedingungen

Intervention / Behandlung

Studientyp

Interventionell

Einschreibung (Tatsächlich)

75

Phase

  • Unzutreffend

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienorte

    • Kayseri
      • Talas, Kayseri, Türkei (türkiye), 38039
        • Erciyes University Faculty of Dentistry

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

  • Kind

Akzeptiert gesunde Freiwillige

Nein

Beschreibung

Inclusion Criteria:

  • Patients in the early mixed dentition period;
  • Maxillary intermolar width ≤ 31 mm;
  • Presence of at least 5 mm transverse discrepancy between the maxillary and mandibular arches;
  • Normal vertical growth pattern (Sn-GoGn: 32 ± 6°);
  • Eruption of permanent first molars and central incisors;
  • Presence of at least two primary posterior teeth in each quadrant;
  • Posterior teeth with a clinical crown height of at least 4 mm;
  • Patients aged between 7 and 10 years;
  • Absence of any craniofacial anomalies;
  • Good oral hygiene status; Healthy periodontal tissues.

Exclusion Criteria:

  • Patients with the loss of more than one primary tooth
  • Presence of stainless steel crowns on the maxillary permanent first molars, primary first molars, or primary second molars
  • Patients with systemic or syndromic conditions
  • Presence of palatal exostoses or morphological anomalies of the palatal surface
  • Presence of active temporomandibular joint disorders
  • Children with poor compliance
  • History of allergy to any dental material
  • Patients with multiple and/or advanced caries, tooth agenesis, or supernumerary teeth
  • Patients with skeletal asymmetry

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

  • Hauptzweck: Behandlung
  • Zuteilung: Zufällig
  • Interventionsmodell: Parallele Zuordnung
  • Maskierung: Single

Waffen und Interventionen

Teilnehmergruppe / Arm
Intervention / Behandlung
Kein Eingriff: Kontrollgruppe
Experimental: Invisalign Palatal Expander
In patients treated with the Invisalign Palatal Expander (IPE) (Align Technology, Santa Clara, CA), three-dimensional digital models were obtained using an intraoral scanner (iTero Lumina™, Align Technology). Individualized maxillary expansion amounts were prescribed based on clinical objectives. Unlike conventional aligner therapy, the IPE system does not involve full digital treatment simulation; expansion was defined by the planned transverse increase. Following approval, customized IPE appliance sets were manufactured and delivered. Patients were instructed to wear the appliance full-time, including during meals, removing it only for oral hygiene procedures. The activation protocol consisted of appliance changes every 2 days, providing 0.25 mm transverse expansion per stage. After completion of expansion, retention was achieved using Invisalign Palatal Holder appliances fabricated from new digital scans.
Experimental: In-House Aligner (2-Day Protocol)
In-house clear aligners were fabricated using a fully digital workflow. Digital impressions were obtained with an intraoral scanner (3Shape TRIOS), and maxillary models were processed in CAD software for segmentation and attachment planning. Buccal retention attachments were placed on primary canines, primary molars, and permanent first molars. Maxillary models were digitally expanded in 0.2 mm increments per stage, generating sequential STL files. Models were 3D-printed and thermoformed to fabricate aligners, which were then trimmed, polished, and labeled. Patients received five aligners at each visit and were instructed to change them every 2 days. Follow-up visits were scheduled at 10-day intervals. At each visit, treatment progress was assessed, and the next series of aligners was provided.
Experimental: In-House Aligner (5-Day Protocol)
In-house clear aligners were fabricated using a fully digital workflow. Digital impressions were obtained with an intraoral scanner (3Shape TRIOS), and maxillary models were processed in CAD software for segmentation and attachment planning. Buccal retention attachments were placed on primary canines, primary molars, and permanent first molars to enhance retention and support transverse expansion. Models were digitally expanded in 0.2 mm increments per stage and converted into sequential STL files. These models were 3D-printed (Asiga MAX UV) and thermoformed (MINISTAR S) to produce aligners. The appliances were trimmed, polished, and labeled with sequence numbers. Patients received five aligners per visit and were instructed to change them every 5 days. Follow-up visits were scheduled at 25-day intervals, during which treatment progress was evaluated and new aligners were delivered.
Aktiver Komparator: Invisalign First Aligner
In patients treated with Invisalign First (Align Technology, Santa Clara, CA), three-dimensional digital models were obtained using an intraoral scanner (3Shape TRIOS). Intraoral, extraoral photographs and radiographs were collected and uploaded to the ClinCheck digital treatment planning platform. Individualized treatment objectives were defined, and expansion was planned without concurrent tooth movement to isolate maxillary transverse effects. After achieving the desired expansion, comprehensive orthodontic treatment was continued. Virtual treatment plans were reviewed and revised when necessary before approval. Attachments were placed on posterior teeth to enhance retention and support expansion. Enamel surfaces were etched, bonded, and light-cured using standard orthodontic protocols. Patients were instructed to wear aligners 20-22 hours daily,and aligners were replaced every 5 days.

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Zeitfenster
Maxillary Transverse Dentoalveolar Dimension
Zeitfenster: 20 weeks
20 weeks

Sekundäre Ergebnismessungen

Ergebnis Maßnahme
Zeitfenster
White spot lesion incidence
Zeitfenster: 20 weeks
20 weeks

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Tatsächlich)

26. Mai 2025

Primärer Abschluss (Geschätzt)

1. Mai 2026

Studienabschluss (Geschätzt)

1. Juli 2026

Studienanmeldedaten

Zuerst eingereicht

3. Mai 2026

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

10. Mai 2026

Zuerst gepostet (Tatsächlich)

14. Mai 2026

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

14. Mai 2026

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

10. Mai 2026

Zuletzt verifiziert

1. Mai 2026

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Andere Studien-ID-Nummern

  • 2025/189

Plan für individuelle Teilnehmerdaten (IPD)

Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?

UNENTSCHIEDEN

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .