Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

Comparison of Open-Mouth and Closed-Mouth Impression Techniques for Complete Dentures

19. September 2026 aktualisiert von: Dr. Fatima Shakeel, Watim Medical & Dental College

Comparison of Open Mouth Vs Closed Mouth Edentulous Impression Technique: A Hospital Based Study

This randomized controlled trial compares two final impression techniques for complete dentures, the open mouth technique and the closed mouth technique. Completely edentulous adults with well-formed ridges will be randomly assigned 1:1 to one of the two techniques. All dentures will be made by a single operator using the same materials and laboratory. Six weeks after insertion, an examiner blinded to group allocation will assess denture retention using the Kapur index, and patient satisfaction will be recorded using a 5-item Likert questionnaire.

Studienübersicht

Status

Noch keine Rekrutierung

Bedingungen

Intervention / Behandlung

Detaillierte Beschreibung

In the open mouth group, border molding and the wash impression are made with the patient's mouth open and no occlusal contact. In the closed mouth group, occlusal rims are attached to the custom trays at a predetermined occlusal vertical dimension, and the impression is made while the patient closes and performs functional movements. Jaw relations, try-in, and insertion follow the same protocol for both groups. Retention is scored separately for the maxillary and mandibular dentures, with a score of 2 or 3 counted as adequate. Satisfaction scores range from 5 to 25, and a score of 16 or above counts as satisfied.

Studientyp

Interventionell

Einschreibung (Geschätzt)

88

Phase

  • Unzutreffend

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienkontakt

Studienorte

    • Punjab Province
      • Rawalpindi, Punjab Province, Pakistan, 46000
        • Department of Prosthodontics, Watim Medical and Dental College, Rawat, Rawalpindi, Punjab, Pakistan
        • Kontakt:

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

18 Jahre bis 70 Jahre (Erwachsene, Älterer Erwachsener)

Akzeptiert gesunde Freiwillige

Nein

Studienberechtigte Geschlechter

Alle

Beschreibung

Inclusion Criteria:

  • Adults aged 18 to 70 years
  • Completely edentulous in both maxilla and mandible for at least six months, confirmed by clinical examination and orthopantomogram
  • Well-formed ridges, ACP classification Class I or Class II

Exclusion Criteria:

  • Flabby or hypermobile ridges
  • Atrophic ridges
  • Ridges with bony exostosis
  • Active oral pathology
  • History of radiotherapy to head and neck
  • Uncontrolled systemic disease
  • Neuromuscular or neurological disorders

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

  • Hauptzweck: Behandlung
  • Zuteilung: Zufällig
  • Interventionsmodell: Parallele Zuordnung
  • Maskierung: Single

Waffen und Interventionen

Teilnehmergruppe / Arm
Intervention / Behandlung
Aktiver Komparator: Group A: Open Mouth Technique

Final impressions made in custom trays with sectional border molding using low fusing impression compound and a zinc oxide eugenol wash, with the mouth open and no occlusal contact.

Secondary impression of the edentulous arch made in a custom acrylic tray. Border molding is done in sections with low fusing impression compound, followed by a zinc oxide eugenol wash impression. The clinician manipulates the tissues and the patient performs functional movements, with the mouth open and no occlusal contact. All steps are done by a single trained operator using the same materials and laboratory as the comparison group.

Andere Namen:
  • Open mouth functional impression
  • Conventional border molded impression
Aktiver Komparator: Group B: Closed Mouth Technique

Final impressions made in custom trays with attached occlusal rims set to a predetermined vertical dimension. Border molding and the wash impression are made while the patient closes into occlusion and performs functional movements.

Secondary impression made in custom trays with occlusal rims attached and adjusted to a predetermined occlusal vertical dimension. Maxillary and mandibular trays are inserted together. Border molding with low fusing impression compound and a zinc oxide eugenol wash impression are made while the patient closes into occlusion and performs functional movements, recording the denture bearing areas under simulated functional load. All steps are done by a single trained operator using the same materials and laboratory as the comparison group.

Andere Namen:
  • Closed mouth functional impression
  • Functional impression under occlusal loading

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Adequate retention of maxillary denture
Zeitfenster: 6 weeks after denture insertion

Kapur index score (0 nil, 1 poor, 2 fair, 3 good) assessed by a blinded examiner. A score of 2 or 3 is adequate and 0 or 1 is inadequate.

6 weeks after denture insertion

Sekundäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Adequate retention of mandibular denture
Zeitfenster: 6 weeks after denture insertion

Kapur index score assessed the same way as the maxillary denture.

6 weeks after denture insertion
Patient satisfaction
Zeitfenster: 6 weeks after denture insertion

5-item Likert questionnaire covering retention, comfort, mastication, phonetics, and overall satisfaction, with a total score of 5 to 25. A score of 16 or above counts as satisfied.

6 weeks after denture insertion

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

Ermittler

  • Hauptermittler: Fatima Shakeel, BDS, Watim Medical and Dental College
  • Studienleiter: Zarah Afreen, BDS, FCPS, Watim Medical and Dental College

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Geschätzt)

1. März 2027

Primärer Abschluss (Geschätzt)

1. Juni 2027

Studienabschluss (Geschätzt)

1. Juni 2027

Studienanmeldedaten

Zuerst eingereicht

15. September 2026

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

15. September 2026

Zuerst gepostet (Tatsächlich)

21. September 2026

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

23. September 2026

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

19. September 2026

Zuletzt verifiziert

1. September 2026

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Andere Studien-ID-Nummern

  • WMDC/R&D(ERB)/2025/241

Plan für individuelle Teilnehmerdaten (IPD)

Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?

NEIN

Beschreibung des IPD-Plans

Individual participant data will not be shared publicly to protect participant confidentiality. Summary results will be published in a peer-reviewed journal.

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .