Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

Wear, Clinical Performance and Computerized Occlusal Evaluation of Hybrid Versus Lithium Disilicates Ceramic CAD/CAM Overlays in Endodontically Treated Molars: A 24-Month Comparative Randomized Clinical Trial

11. November 2026 aktualisiert von: Farah Khaled El Hindawy, Cairo University

This randomized clinical trial aims to compare the clinical performance, wear behavior and relative occlusal force distribution of hybrid ceramic and lithium disilicate CAD/CAM overlays in endodontically treated molars over a 24-month follow up period using Modified USPHS criteria, Geomagic control software and digital occlusal analyzer respectively

Studienübersicht

Status

Noch keine Rekrutierung

Bedingungen

Intervention / Behandlung

Studientyp

Interventionell

Einschreibung (Geschätzt)

44

Phase

  • Unzutreffend

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienkontakt

Studieren Sie die Kontaktsicherung

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

20 Jahre bis 50 Jahre (Erwachsene)

Akzeptiert gesunde Freiwillige

Nein

Studienberechtigte Geschlechter

Alle

Beschreibung

Inclusion Criteria:

  • Inclusion criteria of patients: Healthy patients, compliant, having good oral hygiene, willing to commit to the follow up periods, patients without parafunctional habits
  • Inclusion criteria of teeth included: endodontically treated first or second molars, opposing teeth present, consistent root canal fillings, no apical lesion or mobility present, large access cavities with at least one missing wall

Exclusion Criteria:

  • Exclusion criteria of patients: patients having systemic diseases, pregnant females, not willing to commit to the follow up periods, patients with poor oral hygiene, patients having parafunctional habits
  • Exclusion criteria of teeth: endodontically treated anterior or premolar teeth, endodontically treated third molars ,inconsistent root canal filling, presence of periapical lesion or mobility, lack of opposing teeth, conservative access cavities

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

  • Hauptzweck: Behandlung
  • Zuteilung: Zufällig
  • Interventionsmodell: Parallele Zuordnung
  • Maskierung: Doppelt

Waffen und Interventionen

Teilnehmergruppe / Arm
Intervention / Behandlung
Aktiver Komparator: Endodontically treated molars will be restored using lithium disilicate CAD/CAM overlays

Endodontically treated molars will receive lithium disilicate CAD/CAM overlays. Proper cavity preparation will be done based on the concepts of morphology driven preparation, followed by immediate dentin sealing, cavity optimization, scanning, milling and finally cementation of lithium disilicate overlay.

Endodontically treated molars will be prepared to receive lithium disilicate CAD/CAM overlays. Preparation includes cuspal reduction of the buccal and lingual walls 1.5 to 2 mm, removal of all undermined enamel and slight flaring of the cavity walls to 6-10-degree divergence. Following cavity preparation, immediate dentin sealing and cavity optimization followed by scanning and milling of the restoration. Cementation will then follow based on manufacturer instructions using resin cement. Surface treatment including etching of the fitting surface using 9.5% hydrofluoric acid for 20 seconds followed by cleaning for 60 seconds using 37% phosphoric acid gel followed by silane application.

Experimental: Experimental: Endodontically treated molars will be restored using Hybrid Ceramics CAD/CAM overlays

Endodontically treated molars will receive Hybrid ceramics CAD/CAM overlays. Proper cavity preparation will be done based on the concepts of morphology driven preparation, followed by immediate dentin sealing, cavity optimization, scanning, milling and finally cementation of lithium disilicate overlay.

Endodontically treated molars will be prepared to receive hybrid ceramics overlays following the concept of morphology driven preparation. This includes cuspal reduction for the buccal and lingual walls, removal of all undermined enamel, slight flaring of the cavity walls to 6-10-degree divergence. After proper cavity preparation, immediate dentin sealing and cavity optimization will be done followed by scanning, milling and finally cementation of the overlay restoration.

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Wear Assessment
Zeitfenster: baseline, 12 and 24 months

The volumetric loss of the overlays will be measured by the software Geomagic Control Software

baseline, 12 and 24 months

Sekundäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Clinical performance (Marginal Adaptation)
Zeitfenster: baseline, 6, 12, 18 and 24 months

Marginal adaptation will be measured by two assessors following Modified USPHS criteria

baseline, 6, 12, 18 and 24 months
Relative Occlusal load distribution
Zeitfenster: Immediately, 6 and 12 months

relative occlusal load distribution will be measured by digital occlusal analysis system OccluSense

Immediately, 6 and 12 months

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Geschätzt)

15. Dezember 2026

Primärer Abschluss (Geschätzt)

15. Dezember 2027

Studienabschluss (Geschätzt)

15. Dezember 2028

Studienanmeldedaten

Zuerst eingereicht

11. November 2026

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

11. November 2026

Zuerst gepostet (Tatsächlich)

17. November 2026

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

17. November 2026

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

11. November 2026

Zuletzt verifiziert

1. November 2026

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Andere Studien-ID-Nummern

  • Cairo CONS 3-7-5

Plan für individuelle Teilnehmerdaten (IPD)

Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?

NEIN

Beschreibung des IPD-Plans

The dataset contains coded but potentially re-identifiable clinical and patient information. Per the study confidentiality plan, data access is restricted to the principal investigator and study supervisors only with records stored securely under password-protected, limited access systems. No plan for sharing individual participant data with external researchers is currently in place.

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .