이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

Smart Scaffolds, Stronger Smiles Smarter Healing: AI-Boosted Multiphasic Scaffold Design for PDL Regeneration

2026년 9월 22일 업데이트: Sana Ahmed Sakr, Misr University for Science and Technology

AI- Powered Multiphasic 3D Printed Scaffold for Periodontal Defect Regeneration

The periodontal ligament is vital for tooth support, and its loss, frequently resulting from periodontitis, trauma, or endodontic lesions, presents a significant clinical challenge; global cases of severe periodontitis increased by 91.54% from 1990 to 2021. Conventional monophasic scaffolds offer a uniform environment, limiting their efficacy in regenerating complex, multi-tissue structures like the periodontium. This study introduces an AI-enhanced, 3D multi-phasic scaffold to precisely restore the periodontal apparatus and overcome the limitations of non-uniform tissue growth seen in some multiphasic designs. The methodology involved sequential steps: high-resolution CBCT and intraoral scans to capture defect geometry; precise defect mapping to define the Target Regeneration Volume; and AI Mesh mixer implementation to generate three distinct, seamlessly graded lattice zones. This AI-driven design ensures Optimal Biomechanics (Precision) by perfectly matching the scaffold's stiffness to native tissue, thereby eliminating stress-shielding.

연구 개요

상태

초대로 등록

정황

개입 / 치료

상세 설명

Background: The global prevalence of severe periodontitis increased by 91.54% between 1990 and 2021, driven primarily by population growth and population ageing, and now affects more than one billion people worldwide . Left untreated, periodontitis progressively destroys the attachment apparatus and is a leading cause of tooth loss. Conventional regenerative therapies rely largely on monophasic scaffolds, which impose a single, uniform biological and structural environment and therefore struggle to reproduce the layered, multi-tissue architecture of the periodontium. Study Problem: The periodontium is a composite of three histologically and mechanically distinct tissues - alveolar bone, the periodontal ligament (PDL), and cementum - each of which requires a different stiffness, porosity, and biochemical microenvironment for optimal regeneration. Monophasic scaffolds cannot satisfy this requirement simultaneously, which frequently results in fibrous encapsulation, incomplete integration, or stress-shielding. Objectives: This thesis examines the design, fabrication rationale, and clinical evaluation of an Artificial-Intelligence (AI)-boosted three-dimensional (3D) multiphasic scaffold intended to achieve simultaneous, tailored regeneration of alveolar bone, PDL, and cementum through a graded lattice architecture matched to native tissue stiffness. Methodology: The target regeneration volume was defined using high-resolution Cone-Beam Computed Tomography (CBCT) and intraoral optical scanning, processed through AI-assisted defect-segmentation software. A tri-zonal multiphasic scaffold - an outer bone-directed zone, a middle PDL-directed zone, and an inner cementum-directed zone - was generated and produced by 3D 2 Smart Scaffolds, Stronger Smiles bioprinting using biocompatible polymer and bio-ceramic bio-inks, then surgically placed in patients with severe infrabony defects. Clinical and radiographic outcomes were assessed at 2, 6, and 12 months post-operatively.

연구 유형

중재적

등록 (추정된)

1

단계

  • 1단계

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 장소

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 어린이
  • 성인
  • 고령자

건강한 자원 봉사자를 받아들입니다

아니

연구 대상 성별

모두

설명

Inclusion Criteria:

  • Normal Lab investigation

Exclusion Criteria:

  • Bone diseases , Bleeding disorders

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 치료
  • 할당: 해당 없음
  • 중재 모델: 단일 그룹 할당
  • 마스킹: 없음(오픈 라벨)

무기와 개입

참가자 그룹 / 팔
개입 / 치료
실험적: 1 patient

Patients underwent minimally invasive surgical intervention. Following preoperative diagnosis of severe infrabony defects exhibiting mobility and loss of periodontal support, a minimally invasive flap was elevated, and the defect was thoroughly debrided and prepared. The custom-printed multiphasic scaffold was seated into the defect with precision to ensure stability, and complete primary flap closure was achieved [

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Probing Depth
기간: 12 months

the measured distance from the edge of the gum (gingival margin) to the bottom of the gum pocket or sulcus.

12 months
Bone quality , PDL formation
기간: 2,6,12 month

refers to the density and architectural composition of the jawbone, which determines its strength and ability to stabilize a dental implant

2,6,12 month

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

간행물 및 유용한 링크

연구에 대한 정보 입력을 담당하는 사람이 자발적으로 이러한 간행물을 제공합니다. 이것은 연구와 관련된 모든 것에 관한 것일 수 있습니다.

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2025년 11월 25일

기본 완료 (실제)

2026년 5월 14일

연구 완료 (추정된)

2028년 9월 3일

연구 등록 날짜

최초 제출

2026년 9월 15일

QC 기준을 충족하는 최초 제출

2026년 9월 22일

처음 게시됨 (실제)

2026년 9월 28일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 9월 28일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 9월 22일

마지막으로 확인됨

2026년 9월 1일

추가 정보

이 연구와 관련된 용어

기타 연구 ID 번호

  • FWA00025573

개별 참가자 데이터(IPD) 계획

개별 참가자 데이터(IPD)를 공유할 계획입니까?

미정

IPD 계획 설명

Not decided yet

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

미국에서 제조되어 미국에서 수출되는 제품

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .