Smart Scaffolds, Stronger Smiles Smarter Healing: AI-Boosted Multiphasic Scaffold Design for PDL Regeneration
AI- Powered Multiphasic 3D Printed Scaffold for Periodontal Defect Regeneration
The periodontal ligament is vital for tooth support, and its loss, frequently resulting from periodontitis, trauma, or endodontic lesions, presents a significant clinical challenge; global cases of severe periodontitis increased by 91.54% from 1990 to 2021. Conventional monophasic scaffolds offer a uniform environment, limiting their efficacy in regenerating complex, multi-tissue structures like the periodontium. This study introduces an AI-enhanced, 3D multi-phasic scaffold to precisely restore the periodontal apparatus and overcome the limitations of non-uniform tissue growth seen in some multiphasic designs. The methodology involved sequential steps: high-resolution CBCT and intraoral scans to capture defect geometry; precise defect mapping to define the Target Regeneration Volume; and AI Mesh mixer implementation to generate three distinct, seamlessly graded lattice zones. This AI-driven design ensures Optimal Biomechanics (Precision) by perfectly matching the scaffold's stiffness to native tissue, thereby eliminating stress-shielding.
Tutkimuksen yleiskatsaus
Tila
Tila
Ehdot
Ehdot
Interventio / Hoito
Interventio / Hoito
Yksityiskohtainen kuvaus
Background: The global prevalence of severe periodontitis increased by 91.54% between 1990 and 2021, driven primarily by population growth and population ageing, and now affects more than one billion people worldwide . Left untreated, periodontitis progressively destroys the attachment apparatus and is a leading cause of tooth loss. Conventional regenerative therapies rely largely on monophasic scaffolds, which impose a single, uniform biological and structural environment and therefore struggle to reproduce the layered, multi-tissue architecture of the periodontium. Study Problem: The periodontium is a composite of three histologically and mechanically distinct tissues - alveolar bone, the periodontal ligament (PDL), and cementum - each of which requires a different stiffness, porosity, and biochemical microenvironment for optimal regeneration. Monophasic scaffolds cannot satisfy this requirement simultaneously, which frequently results in fibrous encapsulation, incomplete integration, or stress-shielding. Objectives: This thesis examines the design, fabrication rationale, and clinical evaluation of an Artificial-Intelligence (AI)-boosted three-dimensional (3D) multiphasic scaffold intended to achieve simultaneous, tailored regeneration of alveolar bone, PDL, and cementum through a graded lattice architecture matched to native tissue stiffness. Methodology: The target regeneration volume was defined using high-resolution Cone-Beam Computed Tomography (CBCT) and intraoral optical scanning, processed through AI-assisted defect-segmentation software. A tri-zonal multiphasic scaffold - an outer bone-directed zone, a middle PDL-directed zone, and an inner cementum-directed zone - was generated and produced by 3D 2 Smart Scaffolds, Stronger Smiles bioprinting using biocompatible polymer and bio-ceramic bio-inks, then surgically placed in patients with severe infrabony defects. Clinical and radiographic outcomes were assessed at 2, 6, and 12 months post-operatively.
Opintotyyppi
Opintotyyppi
Ilmoittautuminen (Arvioitu)
Ilmoittautuminen
Vaihe
Vaihe
- Vaihe 1
Yhteystiedot ja paikat
Opiskelupaikat
-
-
-
Giza, Egypti
- Giza
-
-
Osallistumiskriteerit
Kelpoisuusvaatimukset
Kelpoisuusvaatimukset
Opintokelpoiset iät
- Lapsi
- Aikuinen
- Vanhempi Aikuinen
Hyväksyy terveitä vapaaehtoisia
Sukupuolet, jotka voivat opiskella
Kuvaus
Inclusion Criteria:
- Normal Lab investigation
Exclusion Criteria:
- Bone diseases , Bleeding disorders
Opintosuunnitelma
Miten tutkimus on suunniteltu?
Suunnittelun yksityiskohdat
- Ensisijainen käyttötarkoitus: Hoito
- Jako: Ei käytössä
- Inventiomalli: Yksittäinen ryhmätehtävä
- Naamiointi: Ei mitään (avoin tarra)
Aseiden lukumäärä
Aseet ja interventiot
Osallistujaryhmä / ArmOsallistujaryhmä / Arm |
Interventio / HoitoInterventio / Hoito |
|---|---|
|
Kokeellinen: 1 patient
|
Patients underwent minimally invasive surgical intervention. Following preoperative diagnosis of severe infrabony defects exhibiting mobility and loss of periodontal support, a minimally invasive flap was elevated, and the defect was thoroughly debrided and prepared. The custom-printed multiphasic scaffold was seated into the defect with precision to ensure stability, and complete primary flap closure was achieved [ |
Mitä tutkimuksessa mitataan?
Ensisijaiset tulostoimenpiteet
Ensisijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Probing Depth
Aikaikkuna: 12 months
|
the measured distance from the edge of the gum (gingival margin) to the bottom of the gum pocket or sulcus. |
12 months
|
|
Bone quality , PDL formation
Aikaikkuna: 2,6,12 month
|
refers to the density and architectural composition of the jawbone, which determines its strength and ability to stabilize a dental implant |
2,6,12 month
|
Yhteistyökumppanit ja tutkijat
Sponsori
Sponsori
Julkaisuja ja hyödyllisiä linkkejä
Yleiset julkaisut
- Lee CH, Hajibandeh J, Suzuki T, Fan A, Shang P, Mao JJ. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex. Tissue Eng Part A. 2014 Apr;20(7-8):1342-51. doi: 10.1089/ten.TEA.2013.0386. Epub 2014 Feb 6.
- Sowmya S, Mony U, Jayachandran P, Reshma S, Kumar RA, Arzate H, Nair SV, Jayakumar R. Tri-Layered Nanocomposite Hydrogel Scaffold for the Concurrent Regeneration of Cementum, Periodontal Ligament, and Alveolar Bone. Adv Healthc Mater. 2017 Apr;6(7). doi: 10.1002/adhm.201601251. Epub 2017 Jan 27.
Opintojen ennätyspäivät
Opi tärkeimmät päivämäärät
Opiskelun aloitus (Todellinen)
Opiskelun aloitus
Ensisijainen valmistuminen (Todellinen)
Ensisijainen valmistuminen
Opintojen valmistuminen (Arvioitu)
Opintojen valmistuminen
Opintoihin ilmoittautumispäivät
Ensimmäinen lähetetty
Ensimmäinen lähetetty
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen Lähetetty (Todellinen)
Ensimmäinen Lähetetty
Tutkimustietojen päivitykset
Viimeisin päivitys julkaistu (Todellinen)
Viimeisin päivitys julkaistu
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeksi vahvistettu
Viimeksi vahvistettu
Lisää tietoa
Tähän tutkimukseen liittyvät termit
Muut tutkimustunnusnumerot
Muut tutkimustunnusnumerot
- FWA00025573
Yksittäisten osallistujien tietojen suunnitelma (IPD)
Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?
IPD-suunnitelman kuvaus
Not decided yet
Lääke- ja laitetiedot, tutkimusasiakirjat
Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta
Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta
Yhdysvalloissa valmistettu ja sieltä viety tuote
Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .