Smart Scaffolds, Stronger Smiles Smarter Healing: AI-Boosted Multiphasic Scaffold Design for PDL Regeneration
AI- Powered Multiphasic 3D Printed Scaffold for Periodontal Defect Regeneration
The periodontal ligament is vital for tooth support, and its loss, frequently resulting from periodontitis, trauma, or endodontic lesions, presents a significant clinical challenge; global cases of severe periodontitis increased by 91.54% from 1990 to 2021. Conventional monophasic scaffolds offer a uniform environment, limiting their efficacy in regenerating complex, multi-tissue structures like the periodontium. This study introduces an AI-enhanced, 3D multi-phasic scaffold to precisely restore the periodontal apparatus and overcome the limitations of non-uniform tissue growth seen in some multiphasic designs. The methodology involved sequential steps: high-resolution CBCT and intraoral scans to capture defect geometry; precise defect mapping to define the Target Regeneration Volume; and AI Mesh mixer implementation to generate three distinct, seamlessly graded lattice zones. This AI-driven design ensures Optimal Biomechanics (Precision) by perfectly matching the scaffold's stiffness to native tissue, thereby eliminating stress-shielding.
Studieoversigt
Status
Status
Betingelser
Betingelser
Intervention / Behandling
Intervention / Behandling
Detaljeret beskrivelse
Background: The global prevalence of severe periodontitis increased by 91.54% between 1990 and 2021, driven primarily by population growth and population ageing, and now affects more than one billion people worldwide . Left untreated, periodontitis progressively destroys the attachment apparatus and is a leading cause of tooth loss. Conventional regenerative therapies rely largely on monophasic scaffolds, which impose a single, uniform biological and structural environment and therefore struggle to reproduce the layered, multi-tissue architecture of the periodontium. Study Problem: The periodontium is a composite of three histologically and mechanically distinct tissues - alveolar bone, the periodontal ligament (PDL), and cementum - each of which requires a different stiffness, porosity, and biochemical microenvironment for optimal regeneration. Monophasic scaffolds cannot satisfy this requirement simultaneously, which frequently results in fibrous encapsulation, incomplete integration, or stress-shielding. Objectives: This thesis examines the design, fabrication rationale, and clinical evaluation of an Artificial-Intelligence (AI)-boosted three-dimensional (3D) multiphasic scaffold intended to achieve simultaneous, tailored regeneration of alveolar bone, PDL, and cementum through a graded lattice architecture matched to native tissue stiffness. Methodology: The target regeneration volume was defined using high-resolution Cone-Beam Computed Tomography (CBCT) and intraoral optical scanning, processed through AI-assisted defect-segmentation software. A tri-zonal multiphasic scaffold - an outer bone-directed zone, a middle PDL-directed zone, and an inner cementum-directed zone - was generated and produced by 3D 2 Smart Scaffolds, Stronger Smiles bioprinting using biocompatible polymer and bio-ceramic bio-inks, then surgically placed in patients with severe infrabony defects. Clinical and radiographic outcomes were assessed at 2, 6, and 12 months post-operatively.
Undersøgelsestype
Undersøgelsestype
Tilmelding (Anslået)
Tilmelding
Fase
Fase
- Fase 1
Kontakter og lokationer
Studiesteder
-
-
-
Giza, Egypten
- Giza
-
-
Deltagelseskriterier
Berettigelseskriterier
Berettigelseskriterier
Aldre berettiget til at studere
- Barn
- Voksen
- Ældre voksen
Tager imod sunde frivillige
Køn, der er berettiget til at studere
Beskrivelse
Inclusion Criteria:
- Normal Lab investigation
Exclusion Criteria:
- Bone diseases , Bleeding disorders
Studieplan
Hvordan er undersøgelsen tilrettelagt?
Design detaljer
- Primært formål: Behandling
- Tildeling: N/A
- Interventionel model: Enkelt gruppeopgave
- Maskning: Ingen (Åben etiket)
Antal våben
Våben og indgreb
Deltagergruppe / ArmDeltagergruppe / Arm |
Intervention / BehandlingIntervention / Behandling |
|---|---|
|
Eksperimentel: 1 patient
|
Patients underwent minimally invasive surgical intervention. Following preoperative diagnosis of severe infrabony defects exhibiting mobility and loss of periodontal support, a minimally invasive flap was elevated, and the defect was thoroughly debrided and prepared. The custom-printed multiphasic scaffold was seated into the defect with precision to ensure stability, and complete primary flap closure was achieved [ |
Hvad måler undersøgelsen?
Primære resultatmål
Primære resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
Probing Depth
Tidsramme: 12 months
|
the measured distance from the edge of the gum (gingival margin) to the bottom of the gum pocket or sulcus. |
12 months
|
|
Bone quality , PDL formation
Tidsramme: 2,6,12 month
|
refers to the density and architectural composition of the jawbone, which determines its strength and ability to stabilize a dental implant |
2,6,12 month
|
Samarbejdspartnere og efterforskere
Sponsor
Sponsor
Publikationer og nyttige links
Generelle publikationer
- Lee CH, Hajibandeh J, Suzuki T, Fan A, Shang P, Mao JJ. Three-dimensional printed multiphase scaffolds for regeneration of periodontium complex. Tissue Eng Part A. 2014 Apr;20(7-8):1342-51. doi: 10.1089/ten.TEA.2013.0386. Epub 2014 Feb 6.
- Sowmya S, Mony U, Jayachandran P, Reshma S, Kumar RA, Arzate H, Nair SV, Jayakumar R. Tri-Layered Nanocomposite Hydrogel Scaffold for the Concurrent Regeneration of Cementum, Periodontal Ligament, and Alveolar Bone. Adv Healthc Mater. 2017 Apr;6(7). doi: 10.1002/adhm.201601251. Epub 2017 Jan 27.
Datoer for undersøgelser
Studer store datoer
Studiestart (Faktiske)
Studiestart
Primær færdiggørelse (Faktiske)
Primær færdiggørelse
Studieafslutning (Anslået)
Studieafslutning
Datoer for studieregistrering
Først indsendt
Først indsendt
Først indsendt, der opfyldte QC-kriterier
Først indsendt, der opfyldte QC-kriterier
Først opslået (Faktiske)
Først opslået
Opdateringer af undersøgelsesjournaler
Sidste opdatering sendt (Faktiske)
Sidste opdatering sendt
Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier
Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier
Sidst verificeret
Sidst verificeret
Mere information
Begreber relateret til denne undersøgelse
Andre undersøgelses-id-numre
Andre undersøgelses-id-numre
- FWA00025573
Plan for individuelle deltagerdata (IPD)
Planlægger du at dele individuelle deltagerdata (IPD)?
IPD-planbeskrivelse
Not decided yet
Lægemiddel- og udstyrsoplysninger, undersøgelsesdokumenter
Studerer et amerikansk FDA-reguleret lægemiddelprodukt
Studerer et amerikansk FDA-reguleret enhedsprodukt
produkt fremstillet i og eksporteret fra U.S.A.
Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .