Denne siden ble automatisk oversatt og nøyaktigheten av oversettelsen er ikke garantert. Vennligst referer til engelsk versjon for en kildetekst.

Fitting of Commonly Available Face Masks for Late Preterm and Term Infants (CAFF)

29. mai 2019 oppdatert av: University Hospital Tuebingen

Around ten percent of newborn infants require positive pressure ventilation (PPV) in the delivery room. This is most commonly delivered using a round or anatomically shaped face mask attached to a T-piece device, self-inflating bag or flow-inflating bag. Face mask ventilation is a challenging technique and difficult to ensure that an appropriate tidal volume is delivered because large and variable leaks occur between the mask and face.

It is recommended by International Guidelines to start with mask ventilation by placing a fitting face mask on the babies face.

A fitting face mask covers the mouth and nose. A non-fitting overlaps the eyes and the chin, which causes a airleak. Studies report variable leak, sometimes more than 50% of inspiratory volume, during PPV in preterm infants in the delivery room. The presence of a large leak may lead to ineffective ventilation and an unsuccessful resuscitation.

A study performed in preterm infants showed that most masks available are too big for the majority of those infants.

The investigators hypothesis is that the commonly available face masks for term infants are similarly too big for some term and late preterm infants (≥ 34 weeks gestation).

Studieoversikt

Status

Fullført

Detaljert beskrivelse

The investigators would like to measure the dimensions of the faces of late preterm and term infants (≥ 34 SSW) within the first 72 hours of life and compare this data with the size of the most recommended available face masks:

VBM Germany:

external diameter smaller mask: 50 mm, external diameter bigger mask: 70 m

Laerdal:

external diameter smaller mask: 50 mm; external diameter bigger mask: 60 mm

Fisher&Paykel:

external diameter smaller mask: 50 mm; external diameter bigger mask: 60 mm

Therefore the investigators want to collect the following information from the participants:

Picture of the participant´s face (2D and 3D-Image) birth weight, head circumference, mode of delivery, gestational age, singletons/ twins/ triplets, date of birth

Studietype

Observasjonsmessig

Registrering (Faktiske)

100

Kontakter og plasseringer

Denne delen inneholder kontaktinformasjon for de som utfører studien, og informasjon om hvor denne studien blir utført.

Studiesteder

      • Tuebingen, Tyskland, 72072
        • University Clinic Tuebingen

Deltakelseskriterier

Forskere ser etter personer som passer til en bestemt beskrivelse, kalt kvalifikasjonskriterier. Noen eksempler på disse kriteriene er en persons generelle helsetilstand eller tidligere behandlinger.

Kvalifikasjonskriterier

Alder som er kvalifisert for studier

Ikke eldre enn 3 dager (Barn)

Tar imot friske frivillige

Ja

Kjønn som er kvalifisert for studier

Alle

Prøvetakingsmetode

Ikke-sannsynlighetsprøve

Studiepopulasjon

  • Late preterm and term infants, gestational week ≥ 34 +0
  • 10 to 15 patients in every gestational-week
  • born at the University Hospital of Tuebingen
  • signed declaration of consent from the parents
  • ≤ 72 hours

Beskrivelse

Inclusion Criteria:

  • Late preterm and term infants, gestational week ≥ 34 +0
  • born at the University Hospital of Tuebingen
  • signed declaration of consent from the parents
  • ≤ 72 hours

Exclusion Criteria:

  • congenital facial anomalies
  • any respirators or other medical device that covers the face
  • missing declaration of consent from the parents

Studieplan

Denne delen gir detaljer om studieplanen, inkludert hvordan studien er utformet og hva studien måler.

Hvordan er studiet utformet?

Designdetaljer

Kohorter og intervensjoner

Gruppe / Kohort
Intervensjon / Behandling
2d and 3D image
A 2D and 3D image of the participants' face will be taken. It will at least last 2-3 sec.
2D and 3D image of infants´ faces

Hva måler studien?

Primære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
Mouth: Find out the best fitting facemask
Tidsramme: 1 year
Measure distance in millimeters with ImageJ and 3DMaxSoftware from the nasofrontal groove to the mental protuberance and determine if the commonly available face masks fit this study population.
1 year
Lips: Find out the best fitting facemask
Tidsramme: 1 year
Measure the lateral points located at each labial commissure in millimeters with ImageJ and 3DMaxSoftware and determine if the commonly available face masks fit this study population.
1 year
Eyes: Find out the best fitting facemask
Tidsramme: 1 year
Measure the points at the inner commissure of the eye fissure in millimeters with ImageJ and 3DMaxSoftware and determine if the commonly available face masks fit this study population.
1 year
Chin: Find out the best fitting facemask
Tidsramme: 1 year
Measure length of the chin in millimeters with ImageJ and 3DMaxSoftware and determine if the commonly available face masks fit this study population.
1 year

Sekundære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
Gestational age
Tidsramme: 1 year
Correlation between gestational age and distance from the nasofrontal groove to the mental protuberance measured in millimeters with ImageJ and 3DMaxSoftware.
1 year
Birth weight
Tidsramme: 1 year
Correlation between birthweight and distance from the nasofrontal groove to the mental protuberance measured in millimeters with ImageJ and 3DMaxSoftware.
1 year
headcircumference
Tidsramme: 1 year
Correlation between headcircumference and distance from the nasofrontal groove to the mental protuberance measured in millimeters with ImageJ and 3DMaxSoftware.
1 year
gender: male/female
Tidsramme: 1 year
Correlation between gender (male/female) and distance from the nasofrontal groove to the mental protuberance measured in millimeters with ImageJ and 3DMaxSoftware.
1 year
way of delivery: spontaneous/cesarean
Tidsramme: 1 year
Correlation between way of delivery and distance from the nasofrontal groove to the mental protuberance measured in millimeters with ImageJ and 3DMaxSoftware..
1 year

Samarbeidspartnere og etterforskere

Det er her du vil finne personer og organisasjoner som er involvert i denne studien.

Publikasjoner og nyttige lenker

Den som er ansvarlig for å legge inn informasjon om studien leverer frivillig disse publikasjonene. Disse kan handle om alt relatert til studiet.

Generelle publikasjoner

Studierekorddatoer

Disse datoene sporer fremdriften for innsending av studieposter og sammendragsresultater til ClinicalTrials.gov. Studieposter og rapporterte resultater gjennomgås av National Library of Medicine (NLM) for å sikre at de oppfyller spesifikke kvalitetskontrollstandarder før de legges ut på det offentlige nettstedet.

Studer hoveddatoer

Studiestart (Faktiske)

10. april 2018

Primær fullføring (Faktiske)

30. januar 2019

Studiet fullført (Faktiske)

30. januar 2019

Datoer for studieregistrering

Først innsendt

24. november 2017

Først innsendt som oppfylte QC-kriteriene

4. desember 2017

Først lagt ut (Faktiske)

11. desember 2017

Oppdateringer av studieposter

Sist oppdatering lagt ut (Faktiske)

30. mai 2019

Siste oppdatering sendt inn som oppfylte QC-kriteriene

29. mai 2019

Sist bekreftet

1. november 2017

Mer informasjon

Begreper knyttet til denne studien

Plan for individuelle deltakerdata (IPD)

Planlegger du å dele individuelle deltakerdata (IPD)?

NEI

Legemiddel- og utstyrsinformasjon, studiedokumenter

Studerer et amerikansk FDA-regulert medikamentprodukt

Nei

Studerer et amerikansk FDA-regulert enhetsprodukt

Nei

Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .

Kliniske studier på Nyfødt

Kliniske studier på 2D and 3D image of infants´ faces

Abonnere