Validation of Triggered EMG Values for Pedicle Screws Using a Powered Screwdriver

October 24, 2016 updated by: University of Colorado, Denver
Previous studies have shown how triggered electromyogram (EMG) pedicle screw stimulation can be used to effectively test correct pedicle screw placement in the lumbar and thoracic vertebrae. Most papers agree that if more than 6mA of current are needed to elicit a response the screw is correctly placed in the bone. If there is a response with less than 6mA there is a strong likelihood of a breach of the pedicle wall or invasion of the spinal canal. Typically this triggered EMG stimulation is done after all the screws have been placed with a ball-tipped probe and is paired with intraoperative fluoroscopy to ensure correct placement of the screws. Another method of testing the current for each screw is with a powered screwdriver, which can stimulate and give a reading as the surgeon places each screw. Both of these methods are currently used by surgeons, however the powered screwdriver has been found to be a faster method. The investigator's aim with this study is to compare these two methods of testing triggered EMG values. The investigators plan on doing this by testing each screw with both the ball-tipped probe and the powered screwdriver, in order to see if there are any statistically significant differences between the readings.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

The purpose of the study is to compare two methods of testing triggered EMG values. All study measurements will be recorded during the surgical procedure. No follow up is required with the patient involved and no personal health information will be recorded from the patients.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Observational

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
27

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • United States
    • Colorado
      • Aurora, Colorado, United States, 80045
        • Children's Hospital Colorado

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

8 years to 21 years (ADULT, CHILD)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Sampling Method

Non-Probability Sample

Study Population

Patients between the ages of 8-21 years of age with a diagnosis of adolescent idiopathic scoliosis (AIS) who will be receiving a spinal fusion.

Description

Inclusion Criteria:

  • between the ages of 8-21 years
  • diagnosis of adolescent idiopathic scoliosis (AIS)
  • scheduled to receive a spinal fusion

Exclusion Criteria:

  • diagnosis of any other type of scoliosis (infantile, juvenile, congenital, neuromuscular, etc)

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

Cohorts and Interventions

Group / Cohort

Group / Cohort

A group or subgroup of participants in an observational study that is assessed for biomedical or health outcomes.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Adolescent idiopathic scoliosis
Patients with adolescent idiopathic scoliosis undergoing spinal fusion
Procedure: Spinal Fusion
The investigators are studying the use of triggered EMG via the IPC POWEREASE screwdriver (Product Codes HBE, HWE, GWF) during spinal fusion surgery in adolescent idiopathic scoliosis by comparing it to the traditional triggered EMG OrthoMon probe system (Product Codes GWF, IKN).

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Triggered EMG value
Time Frame: Will be recorded during surgery, fully assessed after data collection is complete
The triggered EMG value the investigators are measuring is not being evaluated with respect to the individual patient. Rather, the investigators are studying the devices themselves so once all readings are collected (which will take readings from multiple screws in multiple patients) the outcome measure will be assessed.
Will be recorded during surgery, fully assessed after data collection is complete

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
University of Colorado, Denver

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
February 1, 2014

Primary Completion (ACTUAL)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
July 1, 2015

Study Completion (ACTUAL)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
July 1, 2015

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
February 13, 2014

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
February 13, 2014

First Posted (ESTIMATE)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
February 17, 2014

Study Record Updates

Last Update Posted (ESTIMATE)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
October 25, 2016

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 24, 2016

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
October 1, 2016

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 13-2281

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings