Tocilizumab Real-Life Human Factors (RLHFs) Validation Study
Tocilizumab Real-Life Human Factors Validation Study
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Study Type
Study Type
Enrollment (Actual)
Enrollment
Phase
Phase
- Phase 4
Contacts and Locations
Study Locations
-
-
Arizona
-
Mesa, Arizona, United States, 85202
- Arizona Arthritis and Rheuma
-
-
California
-
Los Alamitos, California, United States, 90720
- Valerius Medical Group & Research Ctr of Greater Long Beach
-
Santa Maria, California, United States, 93454
- Pacific Arthritis Ctr Med Grp
-
-
Kentucky
-
Lexington, Kentucky, United States, 40515
- Bluegrass Comm Research, Inc.
-
-
Oklahoma
-
Tulsa, Oklahoma, United States, 74104
- Oklahoma Center For Arthritis Therapy & Research
-
-
Pennsylvania
-
Duncansville, Pennsylvania, United States, 16635
- Altoona Center for Clinical Research
-
Wexford, Pennsylvania, United States, 15090
- Advanced Rheumatology & Arthritis Research Center
-
-
Texas
-
Dallas, Texas, United States, 75231
- Metroplex Clinical Research
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
Accepts Healthy Volunteers
Genders Eligible for Study
Description
Inclusion Criteria:
- Participants with RA for greater than or equal to (>/=6) months receiving 162 mg tocilizumab PFS-NSD for >/=8 weeks and who are suitable for continued treatment at their currently prescribed dose
- CGs and professionally qualified HCPs who are able and willing to administer the injection
Exclusion Criteria:
- RA: Functional status Class IV
- RA: Neuropathies or other conditions that might interfere with pain evaluation
- RA: Pregnant or breastfeeding
- RA: Low neutrophil or platelet count at last laboratory assessment
- RA: Elevated liver enzymes at last laboratory assessment
- Current participation in another interventional clinical trial
- Criteria that might give the participant/CG/HCP an advantage in injection tasks such as employment in the pharmaceutical industry, etc.
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Device Feasibility
- Allocation: Non-Randomized
- Interventional Model: Parallel Assignment
- Masking: None (Open Label)
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Experimental: Caregivers
CGs will perform injection of SC tocilizumab to a subset of participants with RA using the AI-1000 G2 device.
Visit 1 (Day 0) will be conducted for administration training, while Visits 2 and 3 (Days 14 and 28) will be conducted for use/performance evaluation.
|
Tocilizumab will be administered using the AI-1000 G2.
Participants will receive three doses of SC tocilizumab using the AI-1000 G2 device at Visits 1, 2, and 3 (Days 0, 14, and 28).
The dose will remain at 162 milligrams (mg) unless changes are required per protocol for safety or efficacy reasons.
Other Names:
|
|
Experimental: Healthcare Professionals
HCPs will perform injection of SC tocilizumab to a subset of participants with RA using the AI-1000 G2 device.
Because enrolled HCPs are to be professionally qualified to deliver SC injections, no administration training will be provided.
Visits 2 and 3 (Days 14 and 28) will be conducted for use/performance evaluation.
|
Tocilizumab will be administered using the AI-1000 G2.
Participants will receive three doses of SC tocilizumab using the AI-1000 G2 device at Visits 1, 2, and 3 (Days 0, 14, and 28).
The dose will remain at 162 milligrams (mg) unless changes are required per protocol for safety or efficacy reasons.
Other Names:
|
|
Experimental: RA Group 1 (Self-Administration)
Participants with RA will perform self-injection of SC tocilizumab with the AI-1000 G2 device.
Visit 1 (Day 0) will be conducted for administration training, while Visits 2 and 3 (Days 14 and 28) will be conducted for use/performance evaluation.
|
Tocilizumab will be administered using the AI-1000 G2.
Participants will receive three doses of SC tocilizumab using the AI-1000 G2 device at Visits 1, 2, and 3 (Days 0, 14, and 28).
The dose will remain at 162 milligrams (mg) unless changes are required per protocol for safety or efficacy reasons.
Other Names:
|
|
Other: RA Group 2 (Administration by CG)
CGs will perform injection of SC tocilizumab to participants with RA using the AI-1000 G2 device.
Visit 1 (Day 0) will be conducted for administration training, while Visits 2 and 3 (Days 14 and 28) will be conducted for use/performance evaluation.
|
Tocilizumab will be administered using the AI-1000 G2.
Participants will receive three doses of SC tocilizumab using the AI-1000 G2 device at Visits 1, 2, and 3 (Days 0, 14, and 28).
The dose will remain at 162 milligrams (mg) unless changes are required per protocol for safety or efficacy reasons.
Other Names:
|
|
Other: RA Group 3 (Administration by HCP)
HCPs will perform injection of SC tocilizumab to participants with RA using the AI-1000 G2 device.
Because enrolled HCPs are to be professionally qualified to deliver SC injections, no administration training will be provided.
Visit 1 (Day 0) will be performed by the study nurse.
Visits 2 and 3 (Days 14 and 28) will be conducted by the HCP for use/performance evaluation.
|
Tocilizumab will be administered using the AI-1000 G2.
Participants will receive three doses of SC tocilizumab using the AI-1000 G2 device at Visits 1, 2, and 3 (Days 0, 14, and 28).
The dose will remain at 162 milligrams (mg) unless changes are required per protocol for safety or efficacy reasons.
Other Names:
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Percentage of Participants Who Successfully Performed Safety-Critical and Essential Tasks During First Unassisted Use
Time Frame: Day 14
|
Safety-critical tasks included those tasks where errors would have a reasonably foreseeable potential for clinical impact/harm, potentially resulting in direct physical injury to the user and/or conditions that require medical intervention.
Safety-critical tasks included the following: release activation button; check the expiry date; inspect device prior to use; and inspect medication prior to use.
Essential tasks included those essential to the execution of the injection.
Essential tasks included the following: open the carton, remove the device and associated documents; remove cap; start an injection by depressing the needle-shield at the injection site and pressing the activation button; and hold the autoinjector until the complete dose has been delivered.
The percentage of participants who successfully performed safety-critical and essential tasks during the first unassisted use (Day 14) was reported.
|
Day 14
|
|
Percentage of Participants Who Successfully Performed Safety-Critical and Essential Tasks During Second Unassisted Use
Time Frame: Day 28
|
Safety-critical tasks included those tasks where errors would have a reasonably foreseeable potential for clinical impact/harm, potentially resulting in direct physical injury to the user and/or conditions that require medical intervention.
Safety-critical tasks included the following: release activation button; check the expiry date; inspect device prior to use; and inspect medication prior to use.
Essential tasks included those essential to the execution of the injection.
Essential tasks included the following: open the carton, remove the device and associated documents; remove cap; start an injection by depressing the needle-shield at the injection site and pressing the activation button; and hold the autoinjector until the complete dose has been delivered.
The percentage of participants who successfully performed safety-critical and essential tasks during the second unassisted use (Day 28) was reported.
|
Day 28
|
Secondary Outcome Measures
Secondary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Percentage of Participants Who Successfully Performed Ancillary Tasks During First and Second Unassisted Use
Time Frame: Days 14, 28
|
Ancillary tasks included those tasks where the potential harm resulting from use error would be minor in severity, or the resultant harms were estimated to occur at sufficiently low levels.
Ancillary tasks included the following: wash hands; clean the injection site with alcohol swab; wait for the alcohol to dry; dispose of the autoinjector cap; inspect full dose delivered after use; dispose of the autoinjector; and treatment of injection site after injection.
The percentage of participants who succesffully performed ancillary tasks during the first (Day 14) and second unassisted use (Day 28) was reported.
|
Days 14, 28
|
|
Visual Analog Scale (VAS) Score for Injection Pain Among Participants With RA
Time Frame: 0 and 15 minutes after injection on Days 0, 14, 28
|
Injection pain was assessed on a continuous 100-millimeter (mm) VAS, where 0 mm represents "no pain" and 100 mm represents "unbearable pain".
The mean VAS response at each assessment timepoint was reported among participants with RA.
|
0 and 15 minutes after injection on Days 0, 14, 28
|
|
Percentage of Participants by Response to Categorical Scale of Injection Pain Among Participants With RA
Time Frame: 0 and 15 minutes after injection on Days 0, 14, 28
|
Injection pain was assessed on a categorical 6-point Likert scale, ranging from "no pain" to "severe and intolerable".
The percentage of participants was reported by response at each assessment timepoint among participants with RA.
|
0 and 15 minutes after injection on Days 0, 14, 28
|
|
Percentage of Participants by Response to Device Satisfaction Questionnaire
Time Frame: Days 0, 14, 28
|
Device satisfaction was assessed using twelve questions on a categorical 5-point Likert scale, ranging from "strongly agree" to "strongly disagree".
Question (Q) 1 (felt the autoinjection was easy to use), Q2 (felt comfortable while using the autoinjector), Q3 (felt the autoinjector was easy to hold), Q4 (able to tell when injection had completed), Q5 (felt he/she can inject properly with the autoinjector), Q6 (felt he/she had control over the injection process), Q7 (felt confident that he/she injected successfully), Q8 (felt it is easy to dispose of the autoinjector), Q9 (autoinjector would help to manage his/her injection schedule), Q10 (liked the look/feel of the autoinjector), Q11 (would recommend the autoinjector to someone else who needed to inject), Q12 (would continue having injections with the autoinjector).
The percentage of participants was reported by response at each assessment among participants with RA, CGs, and HCPs.
|
Days 0, 14, 28
|
|
Tender Joint Count (TJC) Among Participants With RA
Time Frame: Baseline (Day 0)
|
Sixty-eight joints were assessed for tenderness among participants with RA.
The number of tender joints at Baseline was reported.
|
Baseline (Day 0)
|
|
Swollen Joint Count (SJC) Among Participants With RA
Time Frame: Baseline (Day 0)
|
Sixty-six joints were assessed for swelling among participants with RA.
The number of swollen joints at Baseline was reported.
|
Baseline (Day 0)
|
|
Change From Baseline in Health Assessment Questionnaire-Disability Index (HAQ-DI) Among Participants With RA
Time Frame: Days 0, 14, 28
|
Ability to perform daily living activities was assessed across eight component sets including dressing/grooming, arising, eating, walking, hygiene, reach, grip, and common activities.
Twenty questions were scored on a 4-point Likert scale from 0 meaning "without any difficulty" to 3 meaning "unable to do".
The overall score was computed as the sum of domain scores divided by the number of domains answered.
Therefore, the score range for HAQ-DI was the same as that of the individual questions, that is, from 0 to 3, where 0 indicates "least difficulty" and 3 indicates "extreme difficulty".
The mean change from baseline in HAQ-DI at each assessment was reported among participants with RA.
|
Days 0, 14, 28
|
Collaborators and Investigators
Sponsor
Sponsor
Publications and helpful links
Study record dates
Study Major Dates
Study Start (Actual)
Study Start
Primary Completion (Actual)
Primary Completion
Study Completion (Actual)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Estimate)
First Posted
Study Record Updates
Last Update Posted (Actual)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
Other Study ID Numbers
- WA29917
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.