Root Proximity During Mini-Screw Insertion Using a Digital Three-Dimensional Printed Guide

August 28, 2018 updated by: Hadir Aboshady, Cairo University

Evaluation of Root Proximity During Mini-Screw Insertion Using a Digital Three-Dimensional Printed Guide Versus Conventional Free Hand Placement Technique in Adult Orthodontic Patients A Split Mouth Randomized Clinical Trial

Although mini screw insertion is considered as a simple and non-invasive technique, it's a critical procedure which requires precision and accuracy. The placement of mini-screw poses a challenge to the orthodontist, particularly if the space available for mini-screws is limited.4 The proximity to the vital structures surrounding the proposed mini-screw position necessitates the precise knowledge of the anatomy of the insertion area.5 The incidence of mini-screw to tooth contact in the placement of inter-radicular region was 27%.6 Although failure of mini screw is considered a multi-factorial concern, many studies reported the proximity of a mini-screw to tooth structures is a major risk factor for failure, especially in the inter-radicular inserted mini-screws. guided insertion was believed to give more favorable results. Above all, the recent technology of the scanning and three-dimensional printing could pave the way to construct a simple accurate guide. Additionally all previous studies assessed the insertion accuracy using CBCT post-operatively, that can't be applied on human subjects for ethical reasons. Thus a non-invasive method for assessment of mini-screw insertion should be implemented.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Unknown

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

PICOs P: Adult orthodontic patients need mini screws in maxillary arch bilaterally for anchorage I: Three dimensional printed digital guide for mini screw insertion C: Conventional free hand insertion technique

- O: Primary outcome: Root proximity

Secondary outcomes:

  • Patient discomfort during insertion 17
  • Insertion accuracy
  • Angular deviation
  • Linear deviation
  • Failure 18 S: Split Mouth Randomized clinical Trial

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Anticipated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
30

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

14 years to 45 years (Child, Adult)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Orthodontic patients with Angle's Class I bimaxillary protrusion • Patients having average mandibular plane angle

Exclusion Criteria:

  • Mixed dentition patients

    • Smoker patients
    • Patients with Increased lower facial height
    • Patients with missing posterior teeth
    • Bleeding disorders or anticoagulant therapy
    • Patients with cleft lip & palate
    • Patients with facial asymmetry
    • Patients with transverse maxillary deficiency

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Three dimensional printed digital guide
one mini-screw will be inserted in the buccal interradicular space between upper second premolar and first molar using Three dimensional printed digital guide, which is a device deisgned and printed through CAD/CAM technology, it's a printed plate fit on the teeth and buccal mucosa with a channel for mini- screw insertion, mini-screw will be inserted through the plate's channel
Device: Three dimensional printed digital guide
A CAD/CAM printed plate with a channel for mini-screw insertion
Other Names:
  • surgical guide
  • surgical stent
No Intervention: Conventional free hand insertion
one mini-screw will be inserted in the buccal interradicular space between upper second premolar and first molar using conventional free hand insertion of mini-screw, which is a technique using the guiding anatomy for mini-screw insertion using the driver and the operator's skill.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Root proximity
Time Frame: immediately after mini-screw insertion (T0)
Distance between inserted mini screw and the adjacent roots in microns
immediately after mini-screw insertion (T0)

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Patient discomfort:
Time Frame: immediately after mini-screw insertion (T0)
Likert scale, it is scale divided into five points to measure the degree of patient discomfort maximum value(5) strongly discomfort, discomfort, neutral, little discomfort, and minimum value (0)no discomfort
immediately after mini-screw insertion (T0)

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cairo University

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Anticipated)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
November 15, 2018

Primary Completion (Anticipated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
December 15, 2019

Study Completion (Anticipated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
January 15, 2020

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
August 28, 2018

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
August 28, 2018

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
August 31, 2018

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
August 31, 2018

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
August 28, 2018

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
August 1, 2018

More Information

Terms related to this study

Keywords

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • CEBD-CU-2018-08-27

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

UNDECIDED

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings