Study of Wear in Composite Resin and Reinforced Acrylic Denture Teeth Used in Complete Denture Construction for Completely Edentulous Patients

April 7, 2021 updated by: shereen ismail, Cairo University

Study of Wear in Composite Resin and Reinforced Acrylic Denture Teeth Used in Complete Denture Construction for Completely Edentulous Patients (Randomized Controlled Trial)

Visit 1: Clinical examination and investigations will be carried out for the eligible patients including TMJ examination and intraoral examination for oral mucosa. Diagnostic charts will be prepared with full medical and dental history as well as radiographic records. Primary impression will be performed with irreversible hydro-colloid impression material (alginate), The impressions will be poured with type IV dental stone to obtain diagnostic casts, special tray will be constructed.

Visit 2: Maxillary Face-bow will be recorded to mount the upper cast. The diagnostic casts will be mounted on semi adjustable articulator in centric occluding relation to evaluate the inter-arch distance.

Visit 3: Secondary impression will be performed in special trays by elastomeric impression material. The impression will be poured into typeIV dental stone in order to obtain master cast.

Visit 4: Trial denture base will be constructed and tried in patient's mouth for obtaining maxilla-mandibular relation using face bow record and centric relation record, then mounting of the casts on semi adjustable articulator will be done. The teeth will be set according to the randomization group.

Visit 5: The denture bases will be tried in with acrylic teeth in patient's mouth.

Visit 6: The denture will be delivered to the patient and occlusal adjustments will be done.

Visit 7: Recall visit after one week, further adjustments will be done. The denture will be sent to the scanning center and given to the patient again.

Visit 8: At 3 months follow up, the denture will be inspected for calculus and will be immersed in ultrasonic cleaner for 15 seconds to remove calculus and then scanned.

Visit 9: At 6 months follow up, the denture will be inspected for calculus and will be immersed in ultrasonic cleaner for 15 seconds to remove calculus and then scanned.

Visit 10: At 9 months follow up, the denture will be inspected for calculus and will be immersed in ultrasonic cleaner for 15 seconds to remove calculus and then scanned.

The optical methods tend to fulfill the need for quantitative characterization of surface topography. Specimens will be photographed using USB Digital microscope with a built-in camera (Scope Capture Digital Microscope, Guangdong, China) connected with an IBM compatible personal computer using a fixed magnification of 120X.The images will be recorded with a resolution of 1280 × 1024 pixels per image. Digital microscope images will be cropped using Microsoft office picture manager to specify/standardize area of roughness measurement. The cropped images will be analyzed using WSxM software. Specimens will be photographed using USB Digital microscope with a built-in camera (Scope Capture Digital Microscope, Guangdong, China) connected with an IBM compatible personal computer using a fixed magnification of 120X. The images will be recorded with a resolution of 1280 × 1024 pixels per image. Digital microscope images will be cropped to 350 x 400 pixels using Microsoft office picture manager to specify/standardize area of roughness measurement. The cropped images will be analyzed using WSxM software.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
6

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Egypt
      • Cairo, Egypt
        • Cairo University

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Child
  • Adult
  • Older Adult

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

Edentulous subjects with indication for full dentures Skeletal class I maxillomandibular relationship

Exclusion Criteria:

Uncooperative patients. Subjects that wear dentures for less than 6 hours per day Subjects from which no compliance can be expected

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Quadruple

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: reinforced acrylic resin denture teeth
Shufo acrylic denture teeth
Other: Bredent denture teeth
composite resin denture teeth
Experimental: Composite resin denture teeth
Bredent denture teeth
Other: Bredent denture teeth
composite resin denture teeth

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Optical scanning to detect difference in wear at baseline and 3 months follow up visits
Time Frame: 3 months
Specimens will be photographed using USB Digital microscope with a built-in camera (Scope Capture Digital Microscope, Guangdong, China) connected with an IBM compatible personal computer using a fixed magnification of 120X. The images will be recorded with a resolution of 1280 × 1024 pixels per image. Digital microscope images will be cropped to 350 x 400 pixels using Microsoft office picture manager to specify/standardize area of roughness measurement. The cropped images will be analyzed using WSxM software.
3 months
Optical scanning to detect difference in wear at baseline and 6 months follow up visits
Time Frame: 6 months
Specimens will be photographed using USB Digital microscope with a built-in camera (Scope Capture Digital Microscope, Guangdong, China) connected with an IBM compatible personal computer using a fixed magnification of 120X. The images will be recorded with a resolution of 1280 × 1024 pixels per image. Digital microscope images will be cropped to 350 x 400 pixels using Microsoft office picture manager to specify/standardize area of roughness measurement. The cropped images will be analyzed using WSxM software.
6 months
Optical scanning to detect difference in wear at baseline and 9 months follow up visits
Time Frame: 9 months
Specimens will be photographed using USB Digital microscope with a built-in camera (Scope Capture Digital Microscope, Guangdong, China) connected with an IBM compatible personal computer using a fixed magnification of 120X. The images will be recorded with a resolution of 1280 × 1024 pixels per image. Digital microscope images will be cropped to 350 x 400 pixels using Microsoft office picture manager to specify/standardize area of roughness measurement. The cropped images will be analyzed using WSxM software.
9 months

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Cairo University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
May 1, 2018

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
May 1, 2019

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
May 1, 2019

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
April 17, 2018

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 7, 2021

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
April 9, 2021

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
April 9, 2021

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 7, 2021

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
April 1, 2021

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 123456789 (Bandirma Onyedi Eylul University)

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Undecided

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Wear, Occlusal

Clinical Trials on Bredent denture teeth

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings