Assessment of Pain Associated With Insertion Torque and Correlation of Primary Implant Stability Measurement Methods

December 9, 2023 updated by: Mehmet Gumus Kanmaz, Ege University
The objective of this observational study is to evaluate the primary stability of dental implants and the relationship between insertion torque and patients' pain levels assessed with the visual analogue scale (VAS)

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Primary implant stability plays a key role in providing osseointegration. Higher insertion torque indicates higher primary stability. However, the effect of increased insertion torque on patient pain levels has not been clearly demonstrated. Several methods for measuring primary stability have been defined so far. Insertion torque, periotest measurements, and resonance frequency analysis are mostly preferred due to their ease of use and non-invasiveness.

The aim of the present study is to evaluate the relationship between insertion torque and patients' pain levels assessed with the visual analogue scale (VAS) and to assess the relationship between insertion torque, periotest measurements, and resonance frequency analysis.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
15

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • No contraindications for implant surgery;
  • Bilateral single-tooth loss in the posterior mandible;
  • Sufficient bone amount for implant diameter and height at the implant site;
  • At least 3 months after tooth extraction at the implant site;

Exclusion Criteria

  • History of chronic infection or pain at the implant site;
  • History of radiotherapy to the head and neck region for any reason;
  • Local or systemic causes of persistent anti-inflammatory or analgesic medication;
  • Patients with suspicion of pregnancy.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: High insertion torque group
Fifteen patients (eight females and seven males) with a single-tooth deficiency bilaterally in the molar region of the lower jaw were included in the study. Implant placement with high insertion torque was planned on one side of the jaw. The implant drills were applied as recommended by the company. To achieve high insertion torque, the single-use final drill from the implant box was not used in the high torque group.
Procedure: Dental Implantation with high torque
Fifteen patients with bilateral single-tooth loss in the posterior mandible will be included in the study. One implant was randomly placed with high insertion torque in each patient. A total of 15 implants will be placed, and insertion torque values will be recorded.
Active Comparator: Low insertion torque group
Fifteen patients (eight females and seven males) with a single-tooth deficiency bilaterally in the molar region of the lower jaw were included in the study. Implant placement with low insertion torque was planned on the otherside of the jaw. The implant drills were applied as recommended by the company. To achieve low insertion torque, the single-use final drill was applied two times.
Procedure: Dental Implantation with low torque
Fifteen patients with bilateral single-tooth loss in the posterior mandible will be included in the study. One implant was randomly placed with low insertion torque in each patient. A total of 15 implants will be placed, and insertion torque values will be recorded.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Pain levels assessed with the visual analogue scale (VAS)
Time Frame: 7 days
Patients will be asked to record the number of painkillers taken each day and evaluate their pain levels using a 0-10 VAS form before and after the operation. A score of 0 indicated no pain while 10 indicated the worst pain possible. A VAS score of 1-3 indicated mild pain, 4-6 indicated moderate pain, and 7-10 indicated very severe pain.
7 days

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Insertion torque values
Time Frame: 1 day
After the implant slots were prepared, the coronal part of the implants (MIS Implant Technologies, Bar Lev Industrial Park, Israel) were placed into the slots at 25 rpm without irrigation until the coronal part was at the same level with the ridge top. The maximum insertion torque was recorded while the implants were placed with the help of a physiodispenser that can measure the insertion torque (Kavo Expertsurg lux physiodispenser, KaVo Dental GmbH, Biberach, Germany).
1 day
Periotest measurements
Time Frame: 1 day
Measurements were made with the Periotest (Siemens AG, Bensheim, Germany) device and recorded as PTV (perio test value).
1 day
Resonance frequency analysis values
Time Frame: 1 day
A SmartPeg (Integration Diagnostics AB; Gothenburg, Sweden) suitable for the implant was attached to measure primary implant stability with radiofrequency. Radiofrequency analysis was performed in both mesiodistal and buccolingual directions with the Osstell Mentor (Integration Diagnostics AB; Gothenburg, Sweden) device and the measurements were recorded.
1 day

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Ege University

Collaborators

Collaborators

An organization other than the sponsor that provides support for a clinical study. This support may include activities related to funding, design, implementation, data analysis, or reporting.
MIS Implant Technologies, Ltd

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
April 19, 2016

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
September 9, 2016

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
October 14, 2016

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
October 9, 2023

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
December 9, 2023

First Posted (Estimated)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
December 19, 2023

Study Record Updates

Last Update Posted (Estimated)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
December 19, 2023

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
December 9, 2023

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
December 1, 2023

More Information

Terms related to this study

Keywords

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 16-3.2/9

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings