Effect of Pre-Warming of Local Anesthesia in Reducing Pain Perception During Injection in Children
Effect of Pre-Warming of Local Anesthesia in Reducing Pain Perception During Injection in Children: A Randomized Controlled Clinical Trial
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Study Type
Study Type
Enrollment (Actual)
Enrollment
Phase
Phase
- Not Applicable
Contacts and Locations
Study Locations
-
-
-
Alexandria, Egypt
- Faculty of dentistry, Alexandria university
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
- Child
Accepts Healthy Volunteers
Description
Inclusion Criteria:
- Healthy patients with ASA 1 or 2 Classification.
- Patients with Frankl Behavior Classification 3-4.
- Patients having at least one carious primary molar that requires dental treatment under the effect of local anesthesia.
- Parents' willingness to participate through informed written consent.
Exclusion Criteria:
- Patients with previous negative dental experience.
- Patients complaining of cellulitis or infection spreading in the fascial spaces.
- Patients who have received analgesics within the previous 12 hours before receiving the required dental treatment.
- Patients with any Intellectual Impairment.
- Patients with a history of allergy from any of the components of the dental anesthetic carpule.
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Treatment
- Allocation: Randomized
- Interventional Model: Parallel Assignment
- Masking: Triple
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Active Comparator: Maxillary infiltration at room temperature
|
The local anesthesia cartridge is used at room temperature (average of 21 °C)
A 30 gauge short needle is oriented so that the bevel is facing the bone.
The syringe is held parallel to the long axis of the tooth and the needle is inserted into the height of the mucobuccal fold over the offending tooth.
The needle is advanced to a depth of 1 millimeter into the tissues.
Aspiration is done, and once it is negative then 0.6 ml (nearly one third of the cartridge) of the anesthetic solution is injected slowly without permitting the tissues to balloon.
|
|
Active Comparator: Inferior alveolar nerve block at room temperature
|
The local anesthesia cartridge is used at room temperature (average of 21 °C)
While the mouth is opened as wide as possible, the index finger palpates the external oblique ridge reaching the Coronoid notch.
A 27-gauge long dental needle will be used for injection.
The needle will be directed between the two primary molars on the opposing side of the arch, penetrating the tissues at the point halfway between coronoid notch and the pterygomandibular raphe at the occlusal plane level or slightly lower.The needle is withdrawn 2mm to aspirate.
Once negative aspiration is checked, the remainder of the solution is deposited slowly.
Approximately 1.0 mL of LA will be delivered near the inferior alveolar nerve.
The average depth of insertion is about 15mm, which is nearly two-thirds the needle length.
|
|
Experimental: Maxillary infiltration pre-warmed to 37°C
|
A 30 gauge short needle is oriented so that the bevel is facing the bone.
The syringe is held parallel to the long axis of the tooth and the needle is inserted into the height of the mucobuccal fold over the offending tooth.
The needle is advanced to a depth of 1 millimeter into the tissues.
Aspiration is done, and once it is negative then 0.6 ml (nearly one third of the cartridge) of the anesthetic solution is injected slowly without permitting the tissues to balloon.
About 150 ml of water at 21°C is added to the heating compartment of the heating device.
The Local anesthesia cartridge is placed at the bottom of the heating compartment.
The device is plugged in and the control gauge is set at the "Express milk warming setting for contents up to 180ml/6oz" mark.
The contents would reach 37°C at 120 seconds.
|
|
Experimental: Inferior alveolar nerve block pre-warmed to 37°C
|
While the mouth is opened as wide as possible, the index finger palpates the external oblique ridge reaching the Coronoid notch.
A 27-gauge long dental needle will be used for injection.
The needle will be directed between the two primary molars on the opposing side of the arch, penetrating the tissues at the point halfway between coronoid notch and the pterygomandibular raphe at the occlusal plane level or slightly lower.The needle is withdrawn 2mm to aspirate.
Once negative aspiration is checked, the remainder of the solution is deposited slowly.
Approximately 1.0 mL of LA will be delivered near the inferior alveolar nerve.
The average depth of insertion is about 15mm, which is nearly two-thirds the needle length.
About 150 ml of water at 21°C is added to the heating compartment of the heating device.
The Local anesthesia cartridge is placed at the bottom of the heating compartment.
The device is plugged in and the control gauge is set at the "Express milk warming setting for contents up to 180ml/6oz" mark.
The contents would reach 37°C at 120 seconds.
|
|
Experimental: Maxillary infiltration pre-warmed to 40°C
|
A 30 gauge short needle is oriented so that the bevel is facing the bone.
The syringe is held parallel to the long axis of the tooth and the needle is inserted into the height of the mucobuccal fold over the offending tooth.
The needle is advanced to a depth of 1 millimeter into the tissues.
Aspiration is done, and once it is negative then 0.6 ml (nearly one third of the cartridge) of the anesthetic solution is injected slowly without permitting the tissues to balloon.
About 150 ml of water at 21°C is added to the heating compartment of the heating device.
The Local anesthesia cartridge is placed at the bottom of the heating compartment.
The device is plugged in and the control gauge is set at the "Express milk warming setting for contents up to 180ml/6oz" mark.
The contents would reach 40°C at 130 seconds.
|
|
Experimental: Inferior alveolar nerve block pre-warmed to 40°C
|
While the mouth is opened as wide as possible, the index finger palpates the external oblique ridge reaching the Coronoid notch.
A 27-gauge long dental needle will be used for injection.
The needle will be directed between the two primary molars on the opposing side of the arch, penetrating the tissues at the point halfway between coronoid notch and the pterygomandibular raphe at the occlusal plane level or slightly lower.The needle is withdrawn 2mm to aspirate.
Once negative aspiration is checked, the remainder of the solution is deposited slowly.
Approximately 1.0 mL of LA will be delivered near the inferior alveolar nerve.
The average depth of insertion is about 15mm, which is nearly two-thirds the needle length.
About 150 ml of water at 21°C is added to the heating compartment of the heating device.
The Local anesthesia cartridge is placed at the bottom of the heating compartment.
The device is plugged in and the control gauge is set at the "Express milk warming setting for contents up to 180ml/6oz" mark.
The contents would reach 40°C at 130 seconds.
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Heart rate (HR) monitoring
Time Frame: during local anesthesia administration
|
A pulse oximeter will be used to record and measure the patient's heart rate.
A baseline reading will be obtained before the LA administration and another reading will be obtained directly after the injection is carried out.
Heart rate ranging between 70-100 is considered normal.
|
during local anesthesia administration
|
|
Pain during injection using Sound, Eye, Motor (SEM) Scale
Time Frame: during local anesthesia administration
|
Sound, Eye, Motor (SEM) Scale was used as an objective mean to assess pain during local anesthesia administration. It comprises the following parameters:
|
during local anesthesia administration
|
|
Pain during injection using Face scale
Time Frame: during local anesthesia administration
|
To assess pain subjectively during local anesthesia administration, a modified face scale. It consists of three schematic faces with different facial expressions for happy and sad faces representing:
|
during local anesthesia administration
|
Collaborators and Investigators
Sponsor
Sponsor
Study record dates
Study Major Dates
Study Start (Actual)
Study Start
Primary Completion (Actual)
Primary Completion
Study Completion (Actual)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Actual)
First Posted
Study Record Updates
Last Update Posted (Actual)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
Other Study ID Numbers
- 1/2023
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.