Custom-Made PEEK Versus PTFE Membranes in Maxillary Alveolar Ridge Augmentation

June 25, 2026 updated by: Dania raad, Mansoura University

Custom-Made Polyether Ether Ketone Membrane Versus Polytetrafluoroethylene Membrane in Maxillary Alveolar Ridge Augmentation: A Randomized Controlled Clinical Trial

This randomized controlled clinical study aims to evaluate and compare the effectiveness of custom-made polyether ether ketone (PEEK) membranes versus polytetrafluoroethylene (PTFE) membranes in guided bone regeneration for maxillary alveolar ridge augmentation in the esthetic zone. Thirty patients requiring ridge augmentation prior to dental implant placement will be enrolled and randomly allocated into two equal groups. Group A will receive customized PEEK membranes, while Group B will be treated with PTFE membranes. Clinical and radiographic assessments, including cone beam computed tomography (CBCT), will be performed immediately postoperatively, at 6 months, and at 12 months to evaluate volumetric, horizontal, and vertical bone gain as well as soft tissue healing and complication rates.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Guided bone regeneration (GBR) is a widely accepted technique used to reconstruct deficient alveolar ridges prior to or in conjunction with dental implant placement. This study is designed to evaluate the clinical and radiographic outcomes of two different non-resorbable barrier membranes in maxillary ridge augmentation: customized polyether ether ketone (PEEK) membranes and polytetrafluoroethylene (PTFE) membranes.

Thirty patients requiring maxillary alveolar ridge augmentation in the esthetic zone will be recruited from the Outpatient Clinic of the Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Mansoura University. Patients will be randomly allocated into two groups of equal size. Group A will receive patient-specific 3D-printed PEEK membranes designed using cone beam computed tomography (CBCT) data and computer-aided design/computer-aided manufacturing (CAD/CAM) technology. Group B will receive PTFE membranes stabilized over the grafted site using bone tacks.

In both groups, autogenous bone graft combined with xenogeneic bone substitute will be used for ridge augmentation. Standard surgical protocols will be followed, including flap elevation, recipient site preparation, graft placement, and tension-free primary closure.

Clinical outcomes will be assessed by evaluating soft tissue healing, infection, membrane exposure, and wound dehiscence. Radiographic outcomes will be evaluated using CBCT scans taken immediately postoperatively, at 6 months, and at 12 months. Three-dimensional analysis will be performed using specialized software to measure volumetric bone gain as well as linear horizontal and vertical ridge augmentation.

The study aims to determine whether customized PEEK membranes provide comparable or superior outcomes to PTFE membranes in terms of bone regeneration, stability of augmented volume, and postoperative complications.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Estimated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
30

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Locations

  • Egypt
    • Dakhaliya
      • Al Mansurah, Dakhaliya, Egypt, 12345
        • Recruiting
        • Dania Raad
        • Contact:

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult

Accepts Healthy Volunteers

No

Description

Inclusion Criteria:

Age between 20 and 45 years. Male or female participants. Presence of single or multiple missing teeth associated with vertical alveolar defects (vertical bone height less than 8 mm), horizontal alveolar defects (ridge width less than 6 mm), or combined defects in the maxillary esthetic zone requiring alveolar ridge augmentation before implant placement.

Good oral hygiene.

Exclusion Criteria:

Uncontrolled medical disorders contraindicating surgical intervention. Systemic diseases or medications affecting bone metabolism. Current or previous bisphosphonate therapy. History of radiotherapy. History of chemotherapy. Smokers.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: PEEK Membrane Group
Participants undergo maxillary alveolar ridge augmentation using a customized perforated polyether ether ketone (PEEK) membrane in combination with particulate bone graft material prior to implant placement.
Device: Custom-made PEEK Membrane
Customized perforated polyether ether ketone (PEEK) membrane designed from preoperative CBCT data and used for guided bone regeneration during maxillary alveolar ridge augmentation.
Experimental: PTFE Membrane Group
Participants undergo maxillary alveolar ridge augmentation using a polytetrafluoroethylene (PTFE) membrane in combination with particulate bone graft material prior to implant placement.
Device: PTFE Membrane
Polytetrafluoroethylene (PTFE) membrane used for guided bone regeneration during maxillary alveolar ridge augmentation.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Volumetric Bone Gain
Time Frame: 6 months after surgery

Volumetric bone gain in the augmented maxillary alveolar ridge measured using cone beam computed tomography (CBCT) and three-dimensional reconstruction software. Volumetric analysis will be performed by comparing immediate postoperative and 6-month postoperative CBCT scans.

Volumetric bone gain in the augmented maxillary alveolar ridge measured using cone beam computed tomography (CBCT) and three-dimensional reconstruction software. Volumetric analysis will be performed by comparing immediate postoperative and 6-month postoperative CBCT scans.
6 months after surgery

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Mansoura University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
January 1, 2026

Primary Completion (Estimated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
January 1, 2027

Study Completion (Estimated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
February 1, 2027

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
June 25, 2026

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 25, 2026

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
July 1, 2026

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
July 1, 2026

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 25, 2026

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
June 1, 2026

More Information

Terms related to this study

Keywords

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • MS.26.01.108

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

IPD Plan Description

Up on request from the corresponding author

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Alveolar Ridge Deficiency

Clinical Trials on Custom-made PEEK Membrane

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings