Palatal Guide Wire for Canine Control During Miniscrew-Supported Distalization (PGWCanine)

October 2, 2026 updated by: Selim Arici, Atlas University

Effect of a Palatal Guide Wire on Maxillary Canine Displacement During Miniscrew-Supported Distalization: A Split-Mouth Randomized Controlled Trial

When crowded or protruded teeth are treated by removing an upper premolar on each side, the canine (eye tooth) is first moved backward into the space. As it moves, the tooth tends to rotate and tip out of position, and this rotation is one of the hardest movements to correct and most likely to come back later. This study tested a simple addition to the usual treatment: a small passive wire attached to the inner (palate) side of the canine and connected to the back tooth, meant to guide the canine and keep it from rotating, without adding any extra force.

Sixteen adolescents who needed an upper premolar removed on both sides took part. Because each person has two sides, every patient received both approaches at once: on one randomly chosen side the guide wire was added, and the other side was treated the same way but without it, serving as that patient's own comparison. This split-mouth design lets each patient act as their own control.

The canine was moved backward on both sides using the same light spring and a small bone screw for anchorage. The researchers took dental scans at the start and after one, two, and three months and measured how far each canine moved, how much it rotated and tipped, and whether the back tooth drifted forward. The goal was to find out whether the guide wire reduces unwanted rotation and tipping and affects how quickly the canine moves, without weakening the anchorage.

Study Overview

Status

Completed

Conditions

Intervention / Treatment

Detailed Description

This was a prospective, single-center, split-mouth randomized controlled trial conducted in the Department of Orthodontics, Faculty of Dentistry, Ondokuz Mayıs University. Sixteen patients (12 female, 4 male; mean age 16.6 ± 1.7 years) with Angle Class II division 1 or 2 malocclusion requiring bilateral maxillary first premolar extraction with maximum anchorage were enrolled.

In each patient, the side to receive the guide wire was randomly allocated, balanced so that the guide wire was placed on the right side in 8 patients and on the left in 8. Both canines were distalized with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket. On the experimental side only, a passive 0.020-inch round stainless steel wire was engaged between a bracket bonded to the palatal surface of the canine and the first molar band sheath; this wire was never activated and added no force to the system.

Alginate impressions were taken at the start of distalization (T0) and after 1 (T1), 2 (T2), and 3 (T3) months. Casts were scanned and superimposed on the medial and lateral limits of the third palatal ruga and the medial limit of the second. Distopalatal rotation, canine distalization, canine tipping, and first molar anchorage loss were measured and compared between the guide wire and control sides using paired statistics on the within-patient difference.

Study Type

Interventional

Enrollment (Actual)

16

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • Marmara
      • Samsun, Marmara, Turkey (Türkiye), 55139
        • Ondokuz Mayıs University, Faculty of Dentistry, Department of Orthodontics

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

14 years to 20 years (Child, Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Angle Class II division 1 or division 2 malocclusion
  • Indication for maxillary first premolar extraction
  • Maximum anchorage requirement
  • Minimal or no maxillary incisor crowding
  • No previous orthodontic treatment
  • No congenitally missing or previously extracted maxillary teeth other than third molars
  • Completed pubertal growth spurt

Exclusion Criteria:

  • Any systemic disease or regular medication use
  • Poor oral hygiene or active periodontal disease

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Guide wire side

The maxillary canine on the randomly allocated side was distalized with a 150-g nickel-titanium closed coil spring from an interradicular miniscrew to a power arm in the vertical slot of the canine bracket, with a passive palatal guide wire engaged between a bracket on the palatal surface of the canine and the first molar band sheath.

A passive 0.020-inch round stainless steel wire engaged between a bracket bonded to the palatal surface of the maxillary canine and the first molar band sheath. The wire was never activated and added no force to the distalization system.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Active Comparator: Control side

The contralateral canine was distalized with the identical coil-spring and power-arm system, without a palatal guide wire.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Cumulative distopalatal rotation of the maxillary canine
Time Frame: Baseline (T0) and 3 months (T3)

Change from baseline in the angle between the sagittal reference line and a line through the canine cusp tip along the palatal ridge, measured on rugae-superimposed digital models and compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)
Cumulative canine distalization
Time Frame: Baseline (T0) and 3 months (T3)

Change from baseline in the perpendicular distance from the canine cusp tip to the sagittal reference line, compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Canine tipping
Time Frame: Baseline (T0) and 3 months (T3)

Change from baseline in the disto-occlusal angle of the canine relative to the horizontal reference, compared between sides.

Baseline (T0) and 3 months (T3)
First molar anchorage loss
Time Frame: Baseline (T0) and 3 months (T3)

Mesial movement of the maxillary first molar, measured from its mesial contact point to the sagittal reference line, compared between sides.

Baseline (T0) and 3 months (T3)
Monthly rate of canine distalization and rotation
Time Frame: T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Distalization and rotation increments per monthly interval, compared between sides.

T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

March 4, 2024

Primary Completion (Actual)

August 16, 2024

Study Completion (Actual)

August 16, 2024

Study Registration Dates

First Submitted

September 22, 2026

First Submitted That Met QC Criteria

September 22, 2026

First Posted (Actual)

September 28, 2026

Study Record Updates

Last Update Posted (Actual)

October 6, 2026

Last Update Submitted That Met QC Criteria

October 2, 2026

Last Verified

September 1, 2026

More Information

Terms related to this study

Other Study ID Numbers

  • OMU-2023/259

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

IPD Plan Description

Individual participant data will not be shared in a public repository. De-identified data are available from the corresponding author on reasonable request.

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.