Diese Seite wurde automatisch übersetzt und die Genauigkeit der Übersetzung wird nicht garantiert. Bitte wende dich an die englische Version für einen Quelltext.

Palatal Guide Wire for Canine Control During Miniscrew-Supported Distalization (PGWCanine)

2. Oktober 2026 aktualisiert von: Selim Arici, Atlas University

Effect of a Palatal Guide Wire on Maxillary Canine Displacement During Miniscrew-Supported Distalization: A Split-Mouth Randomized Controlled Trial

When crowded or protruded teeth are treated by removing an upper premolar on each side, the canine (eye tooth) is first moved backward into the space. As it moves, the tooth tends to rotate and tip out of position, and this rotation is one of the hardest movements to correct and most likely to come back later. This study tested a simple addition to the usual treatment: a small passive wire attached to the inner (palate) side of the canine and connected to the back tooth, meant to guide the canine and keep it from rotating, without adding any extra force.

Sixteen adolescents who needed an upper premolar removed on both sides took part. Because each person has two sides, every patient received both approaches at once: on one randomly chosen side the guide wire was added, and the other side was treated the same way but without it, serving as that patient's own comparison. This split-mouth design lets each patient act as their own control.

The canine was moved backward on both sides using the same light spring and a small bone screw for anchorage. The researchers took dental scans at the start and after one, two, and three months and measured how far each canine moved, how much it rotated and tipped, and whether the back tooth drifted forward. The goal was to find out whether the guide wire reduces unwanted rotation and tipping and affects how quickly the canine moves, without weakening the anchorage.

Studienübersicht

Status

Abgeschlossen

Bedingungen

Intervention / Behandlung

Detaillierte Beschreibung

This was a prospective, single-center, split-mouth randomized controlled trial conducted in the Department of Orthodontics, Faculty of Dentistry, Ondokuz Mayıs University. Sixteen patients (12 female, 4 male; mean age 16.6 ± 1.7 years) with Angle Class II division 1 or 2 malocclusion requiring bilateral maxillary first premolar extraction with maximum anchorage were enrolled.

In each patient, the side to receive the guide wire was randomly allocated, balanced so that the guide wire was placed on the right side in 8 patients and on the left in 8. Both canines were distalized with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket. On the experimental side only, a passive 0.020-inch round stainless steel wire was engaged between a bracket bonded to the palatal surface of the canine and the first molar band sheath; this wire was never activated and added no force to the system.

Alginate impressions were taken at the start of distalization (T0) and after 1 (T1), 2 (T2), and 3 (T3) months. Casts were scanned and superimposed on the medial and lateral limits of the third palatal ruga and the medial limit of the second. Distopalatal rotation, canine distalization, canine tipping, and first molar anchorage loss were measured and compared between the guide wire and control sides using paired statistics on the within-patient difference.

Studientyp

Interventionell

Einschreibung (Tatsächlich)

16

Phase

  • Unzutreffend

Kontakte und Standorte

Dieser Abschnitt enthält die Kontaktdaten derjenigen, die die Studie durchführen, und Informationen darüber, wo diese Studie durchgeführt wird.

Studienorte

    • Marmara
      • Samsun, Marmara, Türkei (türkiye), 55139
        • Ondokuz Mayıs University, Faculty of Dentistry, Department of Orthodontics

Teilnahmekriterien

Forscher suchen nach Personen, die einer bestimmten Beschreibung entsprechen, die als Auswahlkriterien bezeichnet werden. Einige Beispiele für diese Kriterien sind der allgemeine Gesundheitszustand einer Person oder frühere Behandlungen.

Zulassungskriterien

Studienberechtigtes Alter

14 Jahre bis 20 Jahre (Kind, Erwachsene)

Akzeptiert gesunde Freiwillige

Nein

Studienberechtigte Geschlechter

Alle

Beschreibung

Inclusion Criteria:

  • Angle Class II division 1 or division 2 malocclusion
  • Indication for maxillary first premolar extraction
  • Maximum anchorage requirement
  • Minimal or no maxillary incisor crowding
  • No previous orthodontic treatment
  • No congenitally missing or previously extracted maxillary teeth other than third molars
  • Completed pubertal growth spurt

Exclusion Criteria:

  • Any systemic disease or regular medication use
  • Poor oral hygiene or active periodontal disease

Studienplan

Dieser Abschnitt enthält Einzelheiten zum Studienplan, einschließlich des Studiendesigns und der Messung der Studieninhalte.

Wie ist die Studie aufgebaut?

Designdetails

  • Hauptzweck: Behandlung
  • Zuteilung: Zufällig
  • Interventionsmodell: Crossover-Aufgabe
  • Maskierung: Keine (Offenes Etikett)

Waffen und Interventionen

Teilnehmergruppe / Arm
Intervention / Behandlung
Experimental: Guide wire side

The maxillary canine on the randomly allocated side was distalized with a 150-g nickel-titanium closed coil spring from an interradicular miniscrew to a power arm in the vertical slot of the canine bracket, with a passive palatal guide wire engaged between a bracket on the palatal surface of the canine and the first molar band sheath.

A passive 0.020-inch round stainless steel wire engaged between a bracket bonded to the palatal surface of the maxillary canine and the first molar band sheath. The wire was never activated and added no force to the distalization system.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Aktiver Komparator: Control side

The contralateral canine was distalized with the identical coil-spring and power-arm system, without a palatal guide wire.

Distalization of the maxillary canine with a 150-g nickel-titanium closed coil spring extended from an interradicular miniscrew to a U-shaped power arm seated in the vertical slot of the canine bracket.

Was misst die Studie?

Primäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Cumulative distopalatal rotation of the maxillary canine
Zeitfenster: Baseline (T0) and 3 months (T3)

Change from baseline in the angle between the sagittal reference line and a line through the canine cusp tip along the palatal ridge, measured on rugae-superimposed digital models and compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)
Cumulative canine distalization
Zeitfenster: Baseline (T0) and 3 months (T3)

Change from baseline in the perpendicular distance from the canine cusp tip to the sagittal reference line, compared between the guide wire and control sides.

Baseline (T0) and 3 months (T3)

Sekundäre Ergebnismessungen

Ergebnis Maßnahme
Maßnahmenbeschreibung
Zeitfenster
Canine tipping
Zeitfenster: Baseline (T0) and 3 months (T3)

Change from baseline in the disto-occlusal angle of the canine relative to the horizontal reference, compared between sides.

Baseline (T0) and 3 months (T3)
First molar anchorage loss
Zeitfenster: Baseline (T0) and 3 months (T3)

Mesial movement of the maxillary first molar, measured from its mesial contact point to the sagittal reference line, compared between sides.

Baseline (T0) and 3 months (T3)
Monthly rate of canine distalization and rotation
Zeitfenster: T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Distalization and rotation increments per monthly interval, compared between sides.

T0, 1 month (T1), 2 months (T2), and 3 months (T3)

Mitarbeiter und Ermittler

Hier finden Sie Personen und Organisationen, die an dieser Studie beteiligt sind.

Sponsor

Studienaufzeichnungsdaten

Diese Daten verfolgen den Fortschritt der Übermittlung von Studienaufzeichnungen und zusammenfassenden Ergebnissen an ClinicalTrials.gov. Studienaufzeichnungen und gemeldete Ergebnisse werden von der National Library of Medicine (NLM) überprüft, um sicherzustellen, dass sie bestimmten Qualitätskontrollstandards entsprechen, bevor sie auf der öffentlichen Website veröffentlicht werden.

Haupttermine studieren

Studienbeginn (Tatsächlich)

4. März 2024

Primärer Abschluss (Tatsächlich)

16. August 2024

Studienabschluss (Tatsächlich)

16. August 2024

Studienanmeldedaten

Zuerst eingereicht

22. September 2026

Zuerst eingereicht, das die QC-Kriterien erfüllt hat

22. September 2026

Zuerst gepostet (Tatsächlich)

28. September 2026

Studienaufzeichnungsaktualisierungen

Letztes Update gepostet (Tatsächlich)

6. Oktober 2026

Letztes eingereichtes Update, das die QC-Kriterien erfüllt

2. Oktober 2026

Zuletzt verifiziert

1. September 2026

Mehr Informationen

Begriffe im Zusammenhang mit dieser Studie

Andere Studien-ID-Nummern

  • OMU-2023/259

Plan für individuelle Teilnehmerdaten (IPD)

Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?

NEIN

Beschreibung des IPD-Plans

Individual participant data will not be shared in a public repository. De-identified data are available from the corresponding author on reasonable request.

Arzneimittel- und Geräteinformationen, Studienunterlagen

Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt

Nein

Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt

Nein

Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .