Die Auswirkungen von Magnesium (Mg)-Supplement und alternierender maxillärer Expansion und Konstriktion (Alt-RAMEC) bei Patienten mit transversaler maxillärer Insuffizienz (TMD) (Mg + Alt-RAMEC)
Die Auswirkungen von Magnesium (Mg)-Supplement und alternativer maxillärer Expansion und Konstriktion (Alt-RAMEC) bei Patienten mit transversaler maxillärer Insuffizienz (TMD): Eine randomisierte klinische Studie.
Diese randomisierte klinische Studie untersucht die Wirkung der Kombination von Magnesiumsupplementierung mit einer kieferorthopädischen Technik namens Alternate Maxillary Expansion and Constriction (Alt-RAMEC) unter Verwendung eines Mikroimplantat-gestützten Geräts zur schnellen Gaumenexpansion (MARPE) zur Behandlung von Erwachsenen (18-30 Jahre) mit transversaler Oberkieferdefizienz (TMD). TMD ist ein Zustand, bei dem der Oberkiefer schmaler als normal ist, was den Biss und die Gesichtsentwicklung beeinträchtigen kann.
Die Studie umfasst zwei Gruppen: eine erhält das Alt-RAMEC-Protokoll mit MARPE allein, die andere erhält dasselbe Protokoll zusammen mit oralen Magnesiumpräparaten. Die Wirksamkeit dieser Behandlungen wird durch die Bewertung von Veränderungen der dentalen und skelettalen Strukturen mittels bildgebender Verfahren und die Auswertung der Muskelfunktion verglichen. Die Teilnehmer werden auch ihre Schmerz- und Unbehaglichkeitsniveaus während der Behandlung melden.
Diese Forschung zielt darauf ab zu verstehen, ob Magnesiumsupplementierung die Wirkung der Alt-RAMEC-Behandlung verbessern, die Behandlungsergebnisse der Patienten steigern und das mit kieferorthopädischen Eingriffen verbundene Unbehagen verringern kann.
Studienübersicht
Status
Status
Bedingungen
Bedingungen
Intervention / Behandlung
Intervention / Behandlung
Detaillierte Beschreibung
Diese klinische Studie zielt darauf ab, die Wirksamkeit von Magnesiumsupplementierung in Kombination mit dem Alternate Maxillary Expansion and Constriction (Alt-RAMEC)-Protokoll unter Verwendung von Micro-implant Assisted Rapid Palatal Expansion (MARPE) bei erwachsenen Patienten mit transversaler Oberkieferdefizienz (TMD) zu bewerten. Die Studie vergleicht zwei Behandlungsgruppen: eine erhält das Alt-RAMEC-Protokoll mit MARPE allein, die andere erhält Alt-RAMEC mit MARPE zusammen mit oraler Magnesiumsupplementierung.
Das Alt-RAMEC-Protokoll umfasst kontrollierte Zyklen von Oberkieferexpansion und -verengung, um die Korrektur von transversalen Oberkieferdiskrepanzen zu erleichtern. Patienten werden über mehrere Wochen mit spezifischen Aktivierungs- und Deaktivierungsregimen unter Verwendung der MARPE-Vorrichtung behandelt. Diese Studie bewertet Veränderungen in dentalen, alveolären, skeletalen und muskulären Strukturen durch den Einsatz fortschrittlicher Bildgebung wie 3D Cone Beam Computed Tomography (CBCT) und Oberflächenelektromyographie (sEMG). Zusätzlich werden patientenberichtete Schmerz- und Unbehagensniveaus während der kieferorthopädischen Behandlung bewertet.
Diese Studie konzentriert sich auf die objektive Messung morphologischer und funktioneller Veränderungen, um zu bestimmen, ob die Magnesiumaufnahme die Effekte der Alt-RAMEC-Behandlung verstärkt und den Patientenkomfort sowie die Behandlungsergebnisse verbessert. Die Ergebnisse könnten wertvolle Beweise für die Optimierung von Managementprotokollen für transversale Oberkieferdefizienz bei jungen erwachsenen Patienten liefern.
Studientyp
Studientyp
Einschreibung (Tatsächlich)
Einschreibung
Phase
Phase
- Unzutreffend
Kontakte und Standorte
Studienkontakt
Studienkontakt
- Name: Rahma Hazim Al-Hussainy, MSc
- Telefonnummer: 00964773245212 +9647732452128
- E-Mail: rahma_haz111@student.usm.my
Studienorte
-
-
Al-Batawen
-
Baghdad, Al-Batawen, Irak, 10001
- Dr. Aws Fakhri Alfatlawi specialized Orthodontics Clinic
-
-
Teilnahmekriterien
Zulassungskriterien
Zulassungskriterien
Studienberechtigtes Alter
- Erwachsene
Akzeptiert gesunde Freiwillige
Beschreibung
Einschlusskriterien:
Einschlusskriterien
- Alle Teilnehmer waren junge Erwachsene aus der Altersgruppe 18-25 Jahre (männlich oder weiblich).
- Bei jedem Patienten liegt ein maxillärer Skelettdefizit vor. (Anteroposteriores Defizit, transversales beidseitiges/einseitiges Defizit)
- Alle Zähne sind ohne Anomalien in Form und Größe durchgebrochen.
- Gute Mundhygiene und Nichtrauchergewohnheiten.
Ausschlusskriterien:
- Anamnese einer früheren kieferorthopädischen Behandlung oder Gaumennahterweiterung
- Patienten mit schwerer progressiver Parodontalerkrankung
- Patienten mit schweren kraniomaxillofazialen Deformitäten wie Lippen-Kiefer-Gaumenspalte
- Gaumennahterweiterung ohne erfolgreiche Expansion
- Erster Molar beim Patienten fehlend oder retiniert.
- Patienten mit Knochenverlust, Zahnfleischrückgang oder persistierender Gingivitis.
- Personen mit starkem Würgereflex.
- Anamnese einer lebensbedrohlichen Erkrankung wie Diabetes mellitus oder einer chronischen Erkrankung wie Organabstoßung nach Transplantation oder Krebs bei Patienten unter Chemo- oder Strahlentherapie und hohem Infektionsrisiko.
Studienplan
Wie ist die Studie aufgebaut?
Designdetails
- Hauptzweck: Behandlung
- Zuteilung: Zufällig
- Interventionsmodell: Parallele Zuordnung
- Maskierung: Single
Anzahl der Arme
Waffen und Interventionen
Teilnehmergruppe / ArmTeilnehmergruppe / Arm |
Intervention / BehandlungIntervention / Behandlung |
|---|---|
|
Aktiver Komparator: Alt-RAMEC/MARPE Without Magnesium Supplementation
Participants receive alternate rapid maxillary expansion and constriction (Alt-RAMEC) using a micro-implant-assisted rapid palatal expansion (MARPE) appliance without magnesium supplementation.
The appliance consists of a 10-mm Maxillary Skeletal Expander II supported by four palatal miniscrews.
Activation consists of two expansion quarter-turns daily in weeks 1 and 3, one reverse quarter-turn daily in weeks 2 and 4, and one to two expansion quarter-turns daily in week 5 until the clinical expansion endpoint is reached.
Weeks 6-12 comprise passive retention and follow-up.
The appliance and activation schedule are identical to those used in the experimental arm; this arm serves as the control for evaluating the additional effects of magnesium supplementation.
|
Participants receive alternate rapid maxillary expansion and constriction (Alt-RAMEC) using a micro-implant-assisted rapid palatal expansion (MARPE) appliance.
The appliance consists of a 10-mm Maxillary Skeletal Expander II supported by four palatal miniscrews, each 1.8 mm in diameter and 11 mm in length.
Activation consists of two expansion quarter-turns daily in weeks 1 and 3, one reverse quarter-turn daily in weeks 2 and 4, and one to two expansion quarter-turns daily in week 5 until the clinical expansion endpoint is reached.
Weeks 6-12 comprise passive retention and follow-up.
The same appliance and activation protocol are used in both study arms.
|
|
Experimental: Alt-RAMEC/MARPE With Magnesium Citrate Supplementation
Participants receive alternate rapid maxillary expansion and constriction (Alt-RAMEC) using a micro-implant-assisted rapid palatal expansion (MARPE) appliance, together with oral magnesium citrate providing 400 mg of elemental magnesium daily, administered as three capsules with food for 12 weeks from the first day of activation.
The appliance consists of a 10-mm Maxillary Skeletal Expander II supported by four palatal miniscrews.
Activation consists of two expansion quarter-turns daily in weeks 1 and 3, one reverse quarter-turn daily in weeks 2 and 4, and one to two expansion quarter-turns daily in week 5 until the clinical expansion endpoint is reached.
Weeks 6-12 comprise passive retention and follow-up, while magnesium supplementation continues.
|
Participants receive alternate rapid maxillary expansion and constriction (Alt-RAMEC) using a micro-implant-assisted rapid palatal expansion (MARPE) appliance.
The appliance consists of a 10-mm Maxillary Skeletal Expander II supported by four palatal miniscrews, each 1.8 mm in diameter and 11 mm in length.
Activation consists of two expansion quarter-turns daily in weeks 1 and 3, one reverse quarter-turn daily in weeks 2 and 4, and one to two expansion quarter-turns daily in week 5 until the clinical expansion endpoint is reached.
Weeks 6-12 comprise passive retention and follow-up.
The same appliance and activation protocol are used in both study arms.
Participants in the experimental arm receive oral magnesium citrate providing a total of 400 mg of elemental magnesium per day, administered as three capsules once daily with food for 12 weeks from the first day of MARPE activation.
Supplementation continues during both the active Alt-RAMEC treatment period and the subsequent passive retention period.
Participants in the active comparator arm receive no magnesium supplementation or placebo.
Andere Namen:
|
Was misst die Studie?
Primäre Ergebnismessungen
Primäre Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
Change from Baseline in Anterior Midpalatal Suture Separation at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in anterior midpalatal suture separation measured in millimetres (mm) using cone-beam computed tomography (CBCT) at the anterior nasal spine (ANS) level.
Measurements are assessed before the first activation of micro-implant-assisted rapid palatal expansion (MARPE; T0) and 12 weeks after activation begins (T1).
The change is calculated as the T1 measurement minus the T0 measurement.
Positive values indicate increased separation at the anterior part of the midpalatal suture.
Changes are compared between participants receiving the alternate maxillary expansion and constriction (Alt-RAMEC) protocol with magnesium supplementation and those receiving the same protocol without magnesium supplementation.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Sekundäre Ergebnismessungen
Sekundäre Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
Change from Baseline in Posterior Midpalatal Suture Separation at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in posterior midpalatal suture separation measured in millimetres (mm) using cone-beam computed tomography (CBCT) at the posterior nasal spine (PNS) level.
Measurements are assessed before the first activation of micro-implant-assisted rapid palatal expansion (MARPE; T0) and 12 weeks after activation begins (T1).
The change is calculated as the T1 measurement minus the T0 measurement.
Positive values indicate increased separation at the posterior part of the midpalatal suture.
Changes are compared between participants receiving the alternate maxillary expansion and constriction (Alt-RAMEC) protocol with magnesium supplementation and those receiving the same protocol without magnesium supplementation.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Andere Ergebnismessungen
Andere Ergebnismessungen
Ergebnis Maßnahme |
Maßnahmenbeschreibung |
Zeitfenster |
|---|---|---|
|
Change from Baseline in Interzygomatic Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in interzygomatic width measured in millimetres using cone-beam computed tomography (CBCT).
Interzygomatic width is the distance between the anterior outer points of the right and left zygomaticomaxillary sutures on a standardized axial section.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased transverse width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Jugale-to-Jugale Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in the transverse distance between the right and left jugale landmarks, measured in millimetres using cone-beam computed tomography (CBCT).
Each jugale landmark is identified at the intersection of the outlines of the maxillary tuberosity and zygomatic process on a standardized coronal section.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased maxillary width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Relative Palatal Expansion Ratio at 12 Weeks
Zeitfenster: 12 weeks after the first MARPE activation (T1).
|
The proportion of mechanical expansion expressed as skeletal midpalatal suture opening.
The mean change in suture separation at the anterior nasal spine (ANS) and posterior nasal spine (PNS), measured using cone-beam computed tomography, is divided by the recorded mechanical expansion of the MARPE screw in millimetres.
The calculation is [(ANS change + PNS change)/2]/mechanical expansion.
The outcome is reported as a unitless ratio (mm/mm).
Higher values indicate greater skeletal opening per unit of mechanical expansion.
|
12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Alveolar Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in maxillary alveolar width measured in millimetres using cone-beam computed tomography (CBCT).
Alveolar width is measured between the right and left buccal alveolar bone surfaces on a standardized coronal section along the line connecting the maxillary first-molar furcations.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased alveolar width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary First-Molar Interfurcation Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in the distance between the furcations of the right and left maxillary first molars, measured in millimetres using cone-beam computed tomography (CBCT).
Measurements are obtained on standardized coronal sections showing both furcations.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased interfurcation width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Right Maxillary First-Molar Inclination at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in the inclination of the right maxillary first molar, measured in degrees using cone-beam computed tomography (CBCT).
Inclination is the angle between the palatal reference line and the palatal root axis, defined by the root apex and canal orifice, on a standardized coronal section.
Change is calculated as the angle at 12 weeks (T1) minus the baseline angle (T0).
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Left Maxillary First-Molar Inclination at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in the inclination of the left maxillary first molar, measured in degrees using cone-beam computed tomography (CBCT).
Inclination is the angle between the palatal reference line and the palatal root axis, defined by the root apex and canal orifice, on a standardized coronal section.
Change is calculated as the angle at 12 weeks (T1) minus the baseline angle (T0)
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Right Maxillary Alveolar Inclination at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in right maxillary alveolar inclination, measured in degrees using cone-beam computed tomography (CBCT).
Alveolar inclination is the angle between the right palatal alveolar bone and the palatal plane on a standardized coronal section.
Change is calculated as the angle at 12 weeks (T1) minus the baseline angle (T0).
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Buccal Bone Thickness at the Right Maxillary First Molar at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in buccal bone thickness at the right maxillary first molar, measured in millimetres using cone-beam computed tomography (CBCT).
Thickness is measured from the root surface to the outer buccal bone surface at the first-molar trifurcation level on a standardized coronal section.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Negative values indicate reduced buccal bone thickness.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Buccal Bone Thickness at the Left Maxillary First Molar at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in buccal bone thickness at the left maxillary first molar, measured in millimetres using cone-beam computed tomography (CBCT).
Thickness is measured from the root surface to the outer buccal bone surface at the first-molar trifurcation level on a standardized coronal section.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Negative values indicate reduced buccal bone thickness.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Mean Midpalatal CBCT Gray Value at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in the mean cone-beam computed tomography (CBCT) gray value within a standardized 4-mm-diameter region of interest centered on the midpalatal suture at the level of the line connecting the palatal roots of the maxillary first molars.
Corresponding regions are assessed at baseline and 12 weeks using standardized image orientation.
Change is calculated as the mean gray value at T1 minus the mean gray value at T0 and is reported in CBCT gray-value units.
This measurement is a relative radiographic density proxy, not calibrated bone mineral density.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Intercanine Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in maxillary intercanine width measured in millimetres on digital dental models obtained by intraoral scanning.
Intercanine width is the distance between the cusp tips of the right and left maxillary canines.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased intercanine width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Intermolar Width at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in maxillary intermolar width measured in millimetres on digital dental models obtained by intraoral scanning.
Intermolar width is the distance between the mesiobuccal cusp tips of the right and left maxillary first molars.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased intermolar width.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Anterior Arch Length at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in maxillary anterior arch length measured in millimetres on digital dental models.
Anterior arch length is the perpendicular distance from the line joining the right and left maxillary canine cusp tips to the most prominent maxillary central-incisor point.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased anterior arch length.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Maxillary Molar-Level Arch Length at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in maxillary arch length at the first-molar level, measured in millimetres on digital dental models.
The measurement is the perpendicular distance from the line joining the mesiobuccal cusp tips of the right and left maxillary first molars to the most prominent maxillary central-incisor point.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased arch length.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Palatal Width at the Maxillary Canine Level at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in palatal width at the maxillary canine level, measured in millimetres on digital dental models.
Width is measured between the right and left palatal gingival-margin midpoints at the maxillary canines.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased palatal width at the canine level.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Palatal Width at the Maxillary First-Molar Level at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in palatal width at the maxillary first-molar level, measured in millimetres on digital dental models.
Width is measured between the right and left palatal gingival-margin points corresponding to the centers of the mesiopalatal cusps of the maxillary first molars.
Change is calculated as the measurement at 12 weeks (T1) minus the baseline measurement (T0).
Positive values indicate increased palatal width at the first-molar level.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Normalized Right Masseter Activity During Chewing at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in normalized surface electromyographic activity of the right masseter muscle during a standardized chewing task.
At each assessment, the root mean square (RMS) amplitude during chewing is divided by the same muscle's RMS amplitude during maximum voluntary clenching in intercuspation, recorded during the same session, and multiplied by 100.
Change is calculated as the normalized value at 12 weeks (T1) minus the baseline value (T0) and is expressed in percentage points of maximum voluntary clench-normalized activity.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Normalized Left Masseter Activity During Chewing at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in normalized surface electromyographic activity of the left masseter muscle during a standardized chewing task.
At each assessment, the root mean square (RMS) amplitude during chewing is divided by the same muscle's RMS amplitude during maximum voluntary clenching in intercuspation, recorded during the same session, and multiplied by 100.
Change is calculated as the normalized value at 12 weeks (T1) minus the baseline value (T0) and is expressed in percentage points of maximum voluntary clench-normalized activity.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Normalized Right Anterior Temporalis Activity During Chewing at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in normalized surface electromyographic activity of the right anterior temporalis muscle during a standardized chewing task.
At each assessment, the root mean square (RMS) amplitude during chewing is divided by the same muscle's RMS amplitude during maximum voluntary clenching in intercuspation, recorded during the same session, and multiplied by 100.
Change is calculated as the normalized value at 12 weeks (T1) minus the baseline value (T0) and is expressed in percentage points of maximum voluntary clench-normalized activity.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Change from Baseline in Normalized Left Anterior Temporalis Activity During Chewing at 12 Weeks
Zeitfenster: Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
Change in normalized surface electromyographic activity of the left anterior temporalis muscle during a standardized chewing task.
At each assessment, the root mean square (RMS) amplitude during chewing is divided by the same muscle's RMS amplitude during maximum voluntary clenching in intercuspation, recorded during the same session, and multiplied by 100.
Change is calculated as the normalized value at 12 weeks (T1) minus the baseline value (T0) and is expressed in percentage points of maximum voluntary clench-normalized activity.
|
Baseline, before the first MARPE activation (T0), and 12 weeks after the first MARPE activation (T1).
|
|
Overall Activation-Period Pain Intensity Assessed at 12 Weeks
Zeitfenster: Assessed 12 weeks after the first MARPE activation (T1), recalling pain during the active treatment period.
|
Participant-reported overall pain intensity experienced during the active alternate maxillary expansion and constriction (Alt-RAMEC) treatment period, assessed at the 12-week visit using a 0-10 pain intensity scale.
A score of 0 indicates no pain or discomfort, and a score of 10 indicates the worst imaginable pain or discomfort.
Higher scores indicate greater pain intensity.
The outcome is reported in scale points and represents recalled overall activation-period pain, not a change from baseline.
|
Assessed 12 weeks after the first MARPE activation (T1), recalling pain during the active treatment period.
|
|
Number of Participants by Most Frequent Pain Location During Active Treatment
Zeitfenster: Assessed 12 weeks after the first MARPE activation (T1), recalling the most frequent pain location during the active treatment period.
|
The most frequent location of pain experienced during the active alternate maxillary expansion and constriction (Alt-RAMEC) treatment period, reported using a structured questionnaire at the 12-week visit.
Participants select one location: anterior palate, posterior palate, molar region, or zygomatic region.
The outcome is reported as the number of participants selecting each location.
|
Assessed 12 weeks after the first MARPE activation (T1), recalling the most frequent pain location during the active treatment period.
|
Mitarbeiter und Ermittler
Sponsor
Sponsor
Studienaufzeichnungsdaten
Haupttermine studieren
Studienbeginn (Tatsächlich)
Studienbeginn
Primärer Abschluss (Tatsächlich)
Primärer Abschluss
Studienabschluss (Tatsächlich)
Studienabschluss
Studienanmeldedaten
Zuerst eingereicht
Zuerst eingereicht
Zuerst eingereicht, das die QC-Kriterien erfüllt hat
Zuerst eingereicht, das die QC-Kriterien erfüllt hat
Zuerst gepostet (Tatsächlich)
Zuerst gepostet
Studienaufzeichnungsaktualisierungen
Letztes Update gepostet (Tatsächlich)
Letztes Update gepostet
Letztes eingereichtes Update, das die QC-Kriterien erfüllt
Letztes eingereichtes Update, das die QC-Kriterien erfüllt
Zuletzt verifiziert
Zuletzt verifiziert
Mehr Informationen
Begriffe im Zusammenhang mit dieser Studie
Schlüsselwörter
Zusätzliche relevante MeSH-Bedingungen
Andere Studien-ID-Nummern
Andere Studien-ID-Nummern
- USM/JEPeM/KK/24070610
Plan für individuelle Teilnehmerdaten (IPD)
Planen Sie, individuelle Teilnehmerdaten (IPD) zu teilen?
Beschreibung des IPD-Plans
Arzneimittel- und Geräteinformationen, Studienunterlagen
Studiert ein von der US-amerikanischen FDA reguliertes Arzneimittelprodukt
Studiert ein von der US-amerikanischen FDA reguliertes Geräteprodukt
Diese Informationen wurden ohne Änderungen direkt von der Website clinicaltrials.gov abgerufen. Wenn Sie Ihre Studiendaten ändern, entfernen oder aktualisieren möchten, wenden Sie sich bitte an register@clinicaltrials.gov. Sobald eine Änderung auf clinicaltrials.gov implementiert wird, wird diese automatisch auch auf unserer Website aktualisiert .