Digital vs. Conventional Indirect Bonding.
Comparison of Indirect Bonding of Orthodontic Brackets Using Digital Versus Conventional Technology: A Randomized Controlled Trial on Bonding Time and Bracket Failure
This randomized split-mouth clinical trial will compare digital and conventional indirect bonding techniques for fixed orthodontic bracket placement in adolescent patients requiring treatment in both dental arches.
Each participant will receive both bonding techniques, with allocation of the digital and conventional indirect bonding procedures to the upper or lower arch determined by randomization. The study will evaluate the time required to complete bracket bonding procedures and the early clinical performance of the two techniques, assessed by bracket failure within the first month after appliance placement.
Tutkimuksen yleiskatsaus
Tila
Tila
Ehdot
Ehdot
Interventio / Hoito
Interventio / Hoito
Yksityiskohtainen kuvaus
Indirect bonding has been proposed as an alternative to direct bonding for the placement of orthodontic brackets, with potential advantages in terms of clinical efficiency, bracket positioning, and patient comfort. In recent years, computer-aided three-dimensional design and manufacturing methods have enabled the production of digital transfer trays for indirect bonding, offering a potentially more standardized workflow compared with conventional laboratory-based procedures.
This randomized split-mouth clinical trial will compare digital and conventional indirect bonding techniques in patients undergoing fixed orthodontic treatment in both the upper and lower arches. Each participant will receive both techniques, with the allocation of the digital and conventional bonding procedures to the upper or lower arch determined by randomization.
In the digital indirect bonding procedure, transfer trays will be produced using a digital workflow and brackets will be bonded using a pre-coated adhesive system. In the conventional indirect bonding procedure, transfer trays will be produced using a standard laboratory workflow and brackets will be bonded using a conventional orthodontic adhesive system.
The study will assess the procedural efficiency of the two techniques by recording the time required to complete the bracket bonding procedure. Early clinical performance will be evaluated by recording bracket failures during the first month of orthodontic treatment. All procedures and follow-up assessments will be performed in a clinical orthodontic setting.
Opintotyyppi
Opintotyyppi
Ilmoittautuminen (Arvioitu)
Ilmoittautuminen
Vaihe
Vaihe
- Ei sovellettavissa
Yhteystiedot ja paikat
Opiskeluyhteys
Opiskeluyhteys
- Nimi: Lorenzo Franchi
- Puhelinnumero: +390557945602
- Sähköposti: lorenzo.franchi@unifi.it
Opiskelupaikat
-
-
-
Florence, Italia
- Rekrytointi
- Orthodontic Clinic, Division of Dentistry, Careggi University Hospital
-
Ottaa yhteyttä:
- Lorenzo Franchi
- Puhelinnumero: +390557945602
- Sähköposti: lorenzo.franchi@unifi.it
-
-
Osallistumiskriteerit
Kelpoisuusvaatimukset
Kelpoisuusvaatimukset
Opintokelpoiset iät
- Lapsi
- Aikuinen
Hyväksyy terveitä vapaaehtoisia
Kuvaus
Inclusion Criteria:
- Patients aged 12 to 18 years requiring fixed orthodontic treatment on both upper and lower arches
- Presence of full permanent dentition, including erupted second molars
Exclusion Criteria:
- Presence of dental anomalies in number (supernumerary or missing teeth) in either arch
- Orthodontic treatment plans involving tooth extractions in either arch
- Nickel allergy
- History of cleft lip and/or palate
- Craniofacial syndromes
Opintosuunnitelma
Miten tutkimus on suunniteltu?
Suunnittelun yksityiskohdat
- Ensisijainen käyttötarkoitus: Hoito
- Jako: Satunnaistettu
- Inventiomalli: Rinnakkaistehtävä
- Naamiointi: Ei mitään (avoin tarra)
Aseiden lukumäärä
Aseet ja interventiot
Osallistujaryhmä / ArmOsallistujaryhmä / Arm |
Interventio / HoitoInterventio / Hoito |
|---|---|
|
Kokeellinen: Digital indirect bonding in the upper arch and conventional indirect bonding in the lower arch
Participants assigned to this arm will receive digital indirect bonding in the upper arch and conventional indirect bonding in the lower arch.
|
Fixed orthodontic appliance will be bonded using a digital indirect bonding technique
Fixed orthodontic appliance will be bonded using a conventional indirect bonding technique
|
|
Active Comparator: Conventional indirect bonding in the upper arch and digital indirect bonding in the lower arch
Participants assigned to this arm will receive conventional indirect bonding in the upper arch and digital indirect bonding in the lower arch.
|
Fixed orthodontic appliance will be bonded using a digital indirect bonding technique
Fixed orthodontic appliance will be bonded using a conventional indirect bonding technique
|
Mitä tutkimuksessa mitataan?
Ensisijaiset tulostoimenpiteet
Ensisijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Time required to complete bracket bonding procedures, measured in minutes
Aikaikkuna: During procedure (from the beginning of bracket bonding to completion of bracket placement)
|
The time required to complete the bracket bonding procedure will be measured in minutes for each participant, from the beginning of the bonding procedure to completion of bracket placement, using the assigned adhesive system.
|
During procedure (from the beginning of bracket bonding to completion of bracket placement)
|
Toissijaiset tulostoimenpiteet
Toissijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
Bracket failure rate within the first month of orthodontic treatment assessed by clinical examination
Aikaikkuna: 1 month after placement of the fixed orthodontic appliance
|
Bracket failure will be assessed by clinical examination and recorded as the number of brackets detached from the tooth surface within the first month after placement of the fixed orthodontic appliance.
|
1 month after placement of the fixed orthodontic appliance
|
Yhteistyökumppanit ja tutkijat
Sponsori
Sponsori
Opintojen ennätyspäivät
Opi tärkeimmät päivämäärät
Opiskelun aloitus (Todellinen)
Opiskelun aloitus
Ensisijainen valmistuminen (Arvioitu)
Ensisijainen valmistuminen
Opintojen valmistuminen (Arvioitu)
Opintojen valmistuminen
Opintoihin ilmoittautumispäivät
Ensimmäinen lähetetty
Ensimmäinen lähetetty
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen Lähetetty (Todellinen)
Ensimmäinen Lähetetty
Tutkimustietojen päivitykset
Viimeisin päivitys julkaistu (Todellinen)
Viimeisin päivitys julkaistu
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeksi vahvistettu
Viimeksi vahvistettu
Lisää tietoa
Tähän tutkimukseen liittyvät termit
Muita asiaankuuluvia MeSH-ehtoja
Muut tutkimustunnusnumerot
Muut tutkimustunnusnumerot
- LF17
Yksittäisten osallistujien tietojen suunnitelma (IPD)
Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?
Lääke- ja laitetiedot, tutkimusasiakirjat
Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta
Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta
Yhdysvalloissa valmistettu ja sieltä viety tuote
Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .