3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment
Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial
Panoramica dello studio
Stato
Stato
Condizioni
Condizioni
Intervento / Trattamento
Intervento / Trattamento
Descrizione dettagliata
Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.
Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.
Tipo di studio
Tipo di studio
Iscrizione (Stimato)
Iscrizione
Fase
Fase
- Non applicabile
Contatti e Sedi
Contatto studio
Contatto studio
- Nome: Salma A Daabis, BDS
- Numero di telefono: +201066600270
- Email: salma.daabis@pua.edu.eg
Backup dei contatti dello studio
- Nome: Ahmed Sh Hashem, Professor
- Numero di telefono: +201002024437
- Email: ahmedshawkydent@yahoo.com
Criteri di partecipazione
Criteri di ammissibilità
Criteri di ammissibilità
Età idonea allo studio
- Adulto
Accetta volontari sani
Descrizione
Inclusion Criteria:
- Age range 21-35 years old after finishing orthodontic treatment.
- Presence of all maxillary and mandibular anterior teeth with normal shape and size.
- Completion of orthodontic treatment with full fixed appliances.
Exclusion Criteria:
- Patients with cleft lip and/or palate or any other craniofacial syndrome
- Patients with compromised oral hygiene or periodontal disease
- Patients who had orthognathic surgery
- Lingual appliance treatments
- Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
- Patients who had separate arch debondings with a difference of more than 2 months in-between jaws
Piano di studio
Come è strutturato lo studio?
Dettagli di progettazione
- Scopo principale: Trattamento
- Assegnazione: Randomizzato
- Modello interventistico: Assegnazione parallela
- Mascheramento: Nessuno (etichetta aperta)
Numero di armi
Armi e interventi
Gruppo di partecipanti / ArmGruppo di partecipanti / Arm |
Intervento / TrattamentoIntervento / Trattamento |
|---|---|
|
Sperimentale: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
|
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
|
|
Sperimentale: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
|
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
|
|
Sperimentale: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
|
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.
|
Cosa sta misurando lo studio?
Misure di risultato primarie
Misure di risultato primarie
Misura del risultato |
Misura Descrizione |
Lasso di tempo |
|---|---|---|
|
Orthodontic stability assessed using Little's Irregularity Index
Lasso di tempo: 12 months
|
Orthodontic stability will be assessed using Little's Irregularity Index on digital models.
The Little's Irregularity Index ranges from 0 mm to higher positive values.
A score of 0 mm indicates perfect alignment.
Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
|
12 months
|
Misure di risultato secondarie
Misure di risultato secondarie
Misura del risultato |
Misura Descrizione |
Lasso di tempo |
|---|---|---|
|
Retainer failure rate
Lasso di tempo: 12 months
|
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
|
12 months
|
|
Probing Pocket Depth (PPD)
Lasso di tempo: 12 months
|
Assessment of periodontal pocket depth using a periodontal probe.
Pocket depth will be recorded in millimeters (mm).
Lower values indicate better periodontal health.
|
12 months
|
|
Plaque Index (Silness and Löe Plaque Index)
Lasso di tempo: 12 months
|
Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3: 0: No plaque
Lower scores indicate better oral hygiene. |
12 months
|
|
Gingival Index (Löe and Silness Gingival Index)
Lasso di tempo: 12 months
|
Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3: 0: Normal gingiva
Lower scores indicate better gingival health. |
12 months
|
|
Bleeding on Probing (BOP)
Lasso di tempo: 12 months
|
Assessment of bleeding on probing as an indicator of gingival inflammation.
Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%).
Lower percentages indicate better periodontal health.
|
12 months
|
Collaboratori e investigatori
Sponsor
Sponsor
Investigatori
Investigatori
- Investigatore principale: Salma A daabis, BDS, Minia University
- Investigatore principale: Ahmed Sh Hashem, Professor, Minia University
Studiare le date dei record
Studia le date principali
Inizio studio (Stimato)
Inizio studio
Completamento primario (Stimato)
Completamento primario
Completamento dello studio (Stimato)
Completamento dello studio
Date di iscrizione allo studio
Primo inviato
Primo inviato
Primo inviato che soddisfa i criteri di controllo qualità
Primo inviato che soddisfa i criteri di controllo qualità
Primo Inserito (Effettivo)
Primo Inserito
Aggiornamenti dei record di studio
Ultimo aggiornamento pubblicato (Effettivo)
Ultimo aggiornamento pubblicato
Ultimo aggiornamento inviato che soddisfa i criteri QC
Ultimo aggiornamento inviato che soddisfa i criteri QC
Ultimo verificato
Ultimo verificato
Maggiori informazioni
Termini relativi a questo studio
Parole chiave
Termini MeSH pertinenti aggiuntivi
Altri numeri di identificazione dello studio
Altri numeri di identificazione dello studio
- SDD-RCT-2026-01
Piano per i dati dei singoli partecipanti (IPD)
Hai intenzione di condividere i dati dei singoli partecipanti (IPD)?
Descrizione del piano IPD
Informazioni su farmaci e dispositivi, documenti di studio
Studia un prodotto farmaceutico regolamentato dalla FDA degli Stati Uniti
Studia un dispositivo regolamentato dalla FDA degli Stati Uniti
Queste informazioni sono state recuperate direttamente dal sito web clinicaltrials.gov senza alcuna modifica. In caso di richieste di modifica, rimozione o aggiornamento dei dettagli dello studio, contattare register@clinicaltrials.gov. Non appena verrà implementata una modifica su clinicaltrials.gov, questa verrà aggiornata automaticamente anche sul nostro sito web .