Comparison of Conventional,3D Printed and Novel Hybrid Stabilization Splints in the Management of Temporomandibular Joint Disorders
Comparative Efficacy of Conventional, 3D-Printed, and Novel Hybrid Stabilization Splints in the Management of Temporomandibular Joint Disorders: A Randomized Clinical Trial
Occlusal splint therapy is a well-established conservative approach for the management of temporomandibular disorders (TMDs); however, variability in clinical outcomes suggests that no single splint design is universally optimal. Conventional chairside stabilization splints are widely used and allow immediate intraoral adjustments; however, they are technique-sensitive and may compromise long-term fit and patient comfort. Conversely, 3D-printed occlusal splints provide superior precision, reproducibility, and material stability; however, their uniformly rigid structure may limit initial comfort and patient compliance, particularly in patients with acute pain or muscle tenderness.
To address these limitations, the researchers intend to develop an innovative hybrid occlusal splint i.e. Dual material 3D printed stabilization splint, that integrates both hard and soft components. This design aims to combine the biomechanical stability and occlusal precision characteristic of rigid splints with the cushioning effect and enhanced comfort provided by soft splints. The objective is to improve adaptation, compliance, and the sustained therapeutic efficacy of the splint.
Studie Overzicht
Toestand
Toestand
Conditie
Conditie
Interventie / Behandeling
Interventie / Behandeling
Gedetailleerde beschrijving
Studietype
Studietype
Inschrijving (Geschat)
Inschrijving
Fase
Fase
- Niet toepasbaar
Contacten en locaties
Studiecontact
Studiecontact
- Naam: Dr. Subhadeepa Paul
- Telefoonnummer: +918638461860
- E-mail: Subhadeepa01@gmail.com
Studie Contact Back-up
- Naam: Dr. Harneet Singh, MDS
- Telefoonnummer: +919315903300
- E-mail: drharneetomdr@gmail.com
Studie Locaties
-
-
Haryana
-
Rohtak, Haryana, Indië, 124001
- Post Graduate Institute of Dental Sciences, Rohtak
-
Contact:
- Dr. Harneet Singh, MDS
- Telefoonnummer: +919034900501
- E-mail: drambikagupta79@rediffmail.com
-
-
Deelname Criteria
Geschiktheidscriteria
Geschiktheidscriteria
Leeftijden die in aanmerking komen voor studie
- Volwassen
Accepteert gezonde vrijwilligers
Beschrijving
Inclusion Criteria:
- Patients presenting with clinical symptoms of TMJ pain disorders were diagnosed using the DC/TMD criteria.
- Age between 18 and 60.
- The same number of original molars was used to avoid affecting periodontal proprioception and bite force.
- The Patient's consent to participate in the study.
Exclusion Criteria:
- Pregnancy
- Not willing to participate in the study
- Healing disorders or systemic diseases where healing is compromised.
- Allergic to PMMA, TPU, PETG or any other 3D printing or conventional prosthetic material.
- Patients with epilepsy or any other neurological disorders.
- Systemic Arthritis or any other osteo-degenerative disorder.
- Acute TMJ trauma or fracture in < 30 days.
- Any obvious dental decay or periodontal disease to which fascial pain could be attributed.
- Patient with psychiatric disorder or on anti-anxiety or anti-depressant drugs.
- Patients with dental implants.
- Any systemic condition associated with widespread pain such as in fibromyalgia.
Studie plan
Hoe is de studie opgezet?
Ontwerpdetails
- Primair doel: Behandeling
- Toewijzing: Gerandomiseerd
- Interventioneel model: Parallelle opdracht
- Masker: Enkel
Aantal wapens
Wapens en interventies
Deelnemersgroep / ArmDeelnemersgroep / Arm |
Interventie / BehandelingInterventie / Behandeling |
|---|---|
|
Actieve vergelijker: Conventional Stabilization Splints
Patients will be given conventional hard stabilization splints.
|
Conventional chairside stabilization splints for treatment of temporomandibular joint disorders.
|
|
Actieve vergelijker: 3D Printed stabilization splints
Patients will be given single material 3D printed stabilization splints made of PETG.
|
3d printed stabilization splint for treatment of temporomandibular joint disorders.
Andere namen:
|
|
Experimenteel: Hybrid Stabilization Splint
Patients will be given Novel Hybrid stabilization splints made of PETG and TPU.
|
3d printed hybrid stabilization splint for treatment of temporomandibular joint disorders.
Andere namen:
|
Wat meet het onderzoek?
Primaire uitkomstmaten
Primaire uitkomstmaten
Uitkomstmaat |
Maatregel Beschrijving |
Tijdsspanne |
|---|---|---|
|
Visual Analog Scale (VAS)
Tijdsspanne: Baseline, 1 week, 2 weeks, 4 weeks
|
To evaluate and contrast pain relief by using the Visual Analog Scale (VAS).The scale ranges from 0 to 10 where 0 is the minimum VAS score and 10 is the maximum score.
Score of 0 indicates no pain and score of 10 indicates maximum pain intensity.
|
Baseline, 1 week, 2 weeks, 4 weeks
|
|
Maximum Mouth Opening
Tijdsspanne: Baseline, 1 week, 2 weeks, 4 weeks
|
To evaluate functional improvement by Measuring the change in Maximum Mouth Opening (MMO) in millimetres from baseline to 1 month.
|
Baseline, 1 week, 2 weeks, 4 weeks
|
|
Maximum Bite Force
Tijdsspanne: baseline, 1 week, 2 weeks, 4 weeks
|
To quantify masticatory efficiency by measuring changes in Maximum Bite Force (MBF) using a bite force analyser device.
|
baseline, 1 week, 2 weeks, 4 weeks
|
Secundaire uitkomstmaten
Secundaire uitkomstmaten
Uitkomstmaat |
Maatregel Beschrijving |
Tijdsspanne |
|---|---|---|
|
Patient Compliance
Tijdsspanne: Baseline, 1 week, 2 weeks, 4 weeks
|
To evaluate patient compliance and comfort using Likert Scale.
The Likert Scale is a 5-point scale where 1 is the minimum score and 5 is the maximum score.
Score 1 indicates very dissatisfied and Score 5 indicates very satisfied.
|
Baseline, 1 week, 2 weeks, 4 weeks
|
Medewerkers en onderzoekers
Sponsor
Sponsor
Onderzoekers
Onderzoekers
- Studie directeur: Dr. Harneet Singh, MDS, Post Graduate Institute of Dental Sciences, Rohtak
Studie record data
Bestudeer belangrijke data
Studie start (Geschat)
Studie start
Primaire voltooiing (Geschat)
Primaire voltooiing
Studie voltooiing (Geschat)
Studie voltooiing
Studieregistratiedata
Eerst ingediend
Eerst ingediend
Eerst ingediend dat voldeed aan de QC-criteria
Eerst ingediend dat voldeed aan de QC-criteria
Eerst geplaatst (Werkelijk)
Eerst geplaatst
Updates van studierecords
Laatste update geplaatst (Werkelijk)
Laatste update geplaatst
Laatste update ingediend die voldeed aan QC-criteria
Laatste update ingediend die voldeed aan QC-criteria
Laatst geverifieerd
Laatst geverifieerd
Meer informatie
Termen gerelateerd aan deze studie
Trefwoorden
Aanvullende relevante MeSH-voorwaarden
- Pijn
- Neurologische manifestaties
- Musculoskeletale aandoeningen
- Stomatognatische ziekten
- Ziekten van het zenuwstelsel
- Spierziekten
- Neuromusculaire aandoeningen
- Gewrichtsziekten
- Kaak Ziekten
- Mandibulaire aandoeningen
- Musculoskeletale pijn
- Craniomandibulaire aandoeningen
- Myofasciale pijnsyndromen
- Pathologische aandoeningen, tekenen en symptomen
- Tekenen en symptomen
- Temporomandibulaire gewrichtsaandoeningen
- Temporomandibulair gewrichtsdisfunctiesyndroom
- Spierpijn
Andere studie-ID-nummers
Andere studie-ID-nummers
- Subhadeepa Omr 26/39
Informatie over medicijnen en apparaten, studiedocumenten
Bestudeert een door de Amerikaanse FDA gereguleerd geneesmiddel
Bestudeert een door de Amerikaanse FDA gereguleerd apparaatproduct
product vervaardigd in en geëxporteerd uit de V.S.
Deze informatie is zonder wijzigingen rechtstreeks van de website clinicaltrials.gov gehaald. Als u verzoeken heeft om uw onderzoeksgegevens te wijzigen, te verwijderen of bij te werken, neem dan contact op met register@clinicaltrials.gov. Zodra er een wijziging wordt doorgevoerd op clinicaltrials.gov, wordt deze ook automatisch bijgewerkt op onze website .