3D-printed Crowns Versus Prefabricated Stainless-Steel Crowns for Intermediate Restoration of Compromised First Permanent Molars

November 5, 2024 updated by: Dina Bassam Mohamed Ahmed, Ain Shams University

3D-printed Crowns Versus Prefabricated Stainless-Steel Crowns for Intermediate Restoration of Compromised First Permanent Molars (Randomized Controlled Clinical Trial)

The study will evaluate the clinical performance and both patient and parent satisfaction of 3d printed crowns versus prefabricated Stainless-steel crowns (SSCs) in compromised first permanent molars

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Active, not recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

A total of Forty permanent first mandibular molars in healthy subjects will be selected from the Pediatric Dentistry and Dental Public Health outpatient clinic.

The molars will be randomly assigned equally into two treatment groups group A 3D-printed crowns & group B prefabricated SSCs, removal of caries with a high-speed handpiece then removal of the remaining carious lesion with excavator then glass ionomer restoration will be placed, preparation of SSCs crowns will be done in Group A by reduction of occlusal surface by about 1.5 mm, Proximally, tooth reduction is made through the mesial and distal contact areas, then roundation of line angles. Proper size of crown will be selected. It can also be helpful to measure the dimension of the contralateral tooth. A correctly fitting crown should snap or click at try in. In group B reduction will be performed on the occlusal surface using a flame stone or a wheel stone, to perform occlusal clearance. Reduction will be performed on the mesial, distal, buccal, and lingual surfaces of the tooth Then roundation of the line angles will be performed. Impression for the preparation will be taken using putty and light poly vinyl siloxane material. The preparation will be optically scanned in the lab and the restoration will be digitally designed using computer designing software. The crown will be printed using 3D printer using hybrid resin material. Crown will be checked for proper fit and cemented to the tooth by self-etch adhesive.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
40

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

Study Locations

  • Egypt
      • Cairo, Egypt, 11361
        • Faculty of dentistry AinShams University

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Child

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • Children included in the study should conform to the following criteria:

    1. Badly broken-down endodontically treated first permanent molar
    2. First permanent molar with extensive multi-surface caries.
    3. First permanent molar with structural developmental defects such as hypoplasia, Molar-Incisor Hypomineralization (MIH), Amelogenesis Imperfecta, and Dentinogenesis Imperfecta

Exclusion Criteria:

  • Children who are uncooperative needing sedation or general anesthesia.
  • Children who are physically or mentally disabled or having any medical condition that will complicate the treatment.
  • Molars of poor prognosis

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Double

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: group A
First permanant molar will be prepared to receive 3D printed crown
Procedure: 3D printed crown
Reduction will be performed on the occlusal surface using a flame stone or a wheel stone, to perform occlusal clearance by 1 mm. Reduction will be performed by 1 mm on the mesial, distal, buccal and lingual surfaces of the tooth. Impression for the preparation will be taken using putty and light poly vinyl siloxane material. Temporary crown will be placed above the preparation as temporisation.The impression will be sent to the lab .The preparation will be optically scanned in the lab and the restoration will be digitally designed using computer designing software.The crown will be printed using 3D printer using hybrid resin(micro-filled hybrid material) material.The 3d printed crown is cemented with resin cement.
Active Comparator: group B
First permanant molar will be prepared to receive SSC
Procedure: stanless steel crown
The occlusal surface of the tooth should be reduced by about 1.5 mm, maintaining its occlusal contour or until the tooth is out of occlusion with adequate room to fit a crown.Proximally, tooth reduction will be made through the mesial and distal contact areas, then roundation of line angles to avoid the creation of ledges or steps.The crown selection will be done by trial and error or by measuring the mesiodistal dimension of the tooth space with dividers. It can also be helpful to measure the dimension of the contralateral tooth. A correctly fitting crown should snap or click at try in.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
The clinical performance of 3d printed crowns versus prefabricated SSCs in compromised first permanent molars
Time Frame: 3,6,12 and 18 months
Evaluation of clinical performance of both crowns regarding gingival health (gingival & plaque index) and Fracture, retention, marginal discoloration and surface texture according to the modified United states Public Health Service (USPHS) criteria. 3,6-12 and 18 months.
3,6,12 and 18 months

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Patient and parent satisfaction.
Time Frame: Immediately ,3,6,12&18 months
Parental and patient satisfaction will be assessed during the delivery session to determine their satisfaction level with 5-point Likert scale where 1-very dissatisfied; 2-dissatisfied; 3-neutrally satisfied; 4-satisfied; 5-very satisfied. Child's perception regarding their esthetics with crowns will be also considered in this study. Children will be asked to rank the crowns based on "Smiley Face Likert Scale."
Immediately ,3,6,12&18 months

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Ain Shams University

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Study Director: Nagwa khattab, BDS,MSc,MD, AinShams University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
June 1, 2023

Primary Completion (Estimated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 1, 2025

Study Completion (Estimated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
August 1, 2025

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
September 15, 2023

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
September 15, 2023

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
September 21, 2023

Study Record Updates

Last Update Posted (Estimated)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
November 7, 2024

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
November 5, 2024

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
November 1, 2024

More Information

Terms related to this study

Keywords

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • FDASU-RECID022321

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on 3D Printed Crowns

Clinical Trials on stanless steel crown

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings