Patient-Reported Outcomes for Different Orthodontic Thermoplastics Used in Clear Aligners

Patient-Reported Outcomes for Different Orthodontic Thermoplastics for Clear Aligners: A Randomized Controlled Clinical Trial

Clear aligner therapy is an esthetic orthodontic treatment modality that uses removable thermoplastic trays to correct dental alignment. Different thermoplastic materials, including thermoplastic polyurethane (TPU) and polyethylene terephthalate glycol (PETG), may differ in flexibility and mechanical behavior. These material differences may influence patient-reported outcomes such as pain, mucosal ulceration, tooth sensitivity, tooth mobility, and material-related allergic symptoms. This randomized, double-blind, parallel-group clinical trial will compare patient-reported outcomes in patients treated with clear aligners fabricated from TPU versus PETG. Participants requiring non-extraction clear aligner therapy for mild to moderate crowding will be randomly allocated in a 1:1 ratio to receive aligners fabricated from either PETG or TPU. Outcomes will be recorded at five predefined time points after aligner assignment and wear: T0 before aligner wear, T1 immediately after aligner insertion/wear, T2 at day 1, T3 at day 3, and T4 at day 7.

Study Overview

Status

Recruiting

Conditions

Intervention / Treatment

Detailed Description

This is a randomized, double-blind, parallel-group clinical trial conducted at the Department of Orthodontics, Institute of Dentistry, CMH Lahore Medical College, Lahore, Pakistan.

Eligible participants will be patients aged 15 to 30 years seeking orthodontic treatment with clear aligners. Patients must have permanent dentition from first molar to first molar, mild to moderate crowding less than 8 mm, and a non-extraction treatment plan.

After baseline assessment, participants will be randomized in a 1:1 ratio to receive clear aligners fabricated from PETG or TPU. Randomization will use a computer-generated sequence prepared by an independent statistician. Allocation concealment will be maintained using sealed envelopes by staff not involved in trial assessment.

The principal investigator will plan all aligner cases. Linear movements will be limited to 0.25 mm per aligner. Angular movements will be limited to 2 degrees per aligner, except torque, which will be limited to 1 degree per aligner. Each aligner will be worn for 10 days.

Patient-reported outcomes will be collected by an operator blinded to the aligner material. Participants will also be blinded to the aligner material. Outcomes include pain on a visual analog scale, ulceration or soft-tissue trauma, tooth sensitivity, tooth mobility, and symptoms suggestive of material-related allergy.

Study Type

Interventional

Enrollment (Estimated)

34

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact Backup

Study Locations

    • Punjab Province
      • Lahore, Punjab Province, Pakistan, 54000
        • Recruiting
        • CMH Lahore Medical college and institue of dentistry
        • Contact:
        • Contact:

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Child
  • Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  • • Patient aged between 15 and 30 years.

    • Permanent dentition, with all permanent teeth from first molar to first molar present.
    • Mild to moderate crowding less than 8 mm.
    • Non-extraction orthodontic treatment plan.
    • Ability and willingness to wear aligners for the required time.
    • Willingness to attend regular visits during orthodontic treatment.

Exclusion Criteria:

  • • Syndromic patients.

    • Known allergy to thermoplastic materials.
    • Patients with systemic diseases that may affect orthodontic treatment or outcome assessment.
    • Patients requiring extraction as part of orthodontic treatment.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Triple

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Experimental Arm A: PETG clear aligners
Participants will receive clear aligners fabricated from polyethylene terephthalate glycol (PETG). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Other Names:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.
Experimental: Experimental Arm B: TPU clear aligners
Participants will receive clear aligners fabricated from thermoplastic polyurethane (TPU). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Other Names:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Pain intensity during clear aligner therapy
Time Frame: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Pain experienced by the participant will be recorded using a visual analog scale (VAS) from 0 to 10, where 0 indicates no pain and 10 indicates the worst pain.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Mucosal ulceration or soft-tissue trauma related to aligner wear
Time Frame: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of ulceration or trauma from the aligner material, recorded by patient report and/or clinical assessment.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth sensitivity
Time Frame: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of sensitivity in any specific tooth as reported by the participant.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth mobility
Time Frame: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of tooth mobility reported or detected during follow-up.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Allergic symptoms or material-related adverse reaction
Time Frame: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Any symptoms suggestive of allergy or adverse reaction to the aligner material will be recorded.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Investigators

  • Principal Investigator: HARIS KHAN, BDS,FCPS, CMH Lahore medical college and IOD

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

August 10, 2026

Primary Completion (Estimated)

November 15, 2026

Study Completion (Estimated)

December 1, 2026

Study Registration Dates

First Submitted

August 7, 2026

First Submitted That Met QC Criteria

August 24, 2026

First Posted (Actual)

August 27, 2026

Study Record Updates

Last Update Posted (Actual)

September 16, 2026

Last Update Submitted That Met QC Criteria

September 14, 2026

Last Verified

September 1, 2026

More Information

Terms related to this study

Other Study ID Numbers

  • 194/ERC/CMH/LMC
  • 449/L-ORIC/CMH LMC (Other Grant/Funding Number: CMH lahore medical college and institute of dentistry)

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.