Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

Patient-Reported Outcomes for Different Orthodontic Thermoplastics Used in Clear Aligners

maanantai 14. syyskuuta 2026 päivittänyt: CMH Lahore Medical College and Institute of Dentistry

Patient-Reported Outcomes for Different Orthodontic Thermoplastics for Clear Aligners: A Randomized Controlled Clinical Trial

Clear aligner therapy is an esthetic orthodontic treatment modality that uses removable thermoplastic trays to correct dental alignment. Different thermoplastic materials, including thermoplastic polyurethane (TPU) and polyethylene terephthalate glycol (PETG), may differ in flexibility and mechanical behavior. These material differences may influence patient-reported outcomes such as pain, mucosal ulceration, tooth sensitivity, tooth mobility, and material-related allergic symptoms. This randomized, double-blind, parallel-group clinical trial will compare patient-reported outcomes in patients treated with clear aligners fabricated from TPU versus PETG. Participants requiring non-extraction clear aligner therapy for mild to moderate crowding will be randomly allocated in a 1:1 ratio to receive aligners fabricated from either PETG or TPU. Outcomes will be recorded at five predefined time points after aligner assignment and wear: T0 before aligner wear, T1 immediately after aligner insertion/wear, T2 at day 1, T3 at day 3, and T4 at day 7.

Tutkimuksen yleiskatsaus

Tila

Rekrytointi

Ehdot

Interventio / Hoito

Yksityiskohtainen kuvaus

This is a randomized, double-blind, parallel-group clinical trial conducted at the Department of Orthodontics, Institute of Dentistry, CMH Lahore Medical College, Lahore, Pakistan.

Eligible participants will be patients aged 15 to 30 years seeking orthodontic treatment with clear aligners. Patients must have permanent dentition from first molar to first molar, mild to moderate crowding less than 8 mm, and a non-extraction treatment plan.

After baseline assessment, participants will be randomized in a 1:1 ratio to receive clear aligners fabricated from PETG or TPU. Randomization will use a computer-generated sequence prepared by an independent statistician. Allocation concealment will be maintained using sealed envelopes by staff not involved in trial assessment.

The principal investigator will plan all aligner cases. Linear movements will be limited to 0.25 mm per aligner. Angular movements will be limited to 2 degrees per aligner, except torque, which will be limited to 1 degree per aligner. Each aligner will be worn for 10 days.

Patient-reported outcomes will be collected by an operator blinded to the aligner material. Participants will also be blinded to the aligner material. Outcomes include pain on a visual analog scale, ulceration or soft-tissue trauma, tooth sensitivity, tooth mobility, and symptoms suggestive of material-related allergy.

Opintotyyppi

Interventio

Ilmoittautuminen (Arvioitu)

34

Vaihe

  • Ei sovellettavissa

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskeluyhteys

Tutki yhteystietojen varmuuskopiointi

Opiskelupaikat

    • Punjab Province
      • Lahore, Punjab Province, Pakistan, 54000
        • Rekrytointi
        • CMH Lahore Medical college and institue of dentistry
        • Ottaa yhteyttä:
        • Ottaa yhteyttä:

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Lapsi
  • Aikuinen

Hyväksyy terveitä vapaaehtoisia

Joo

Kuvaus

Inclusion Criteria:

  • • Patient aged between 15 and 30 years.

    • Permanent dentition, with all permanent teeth from first molar to first molar present.
    • Mild to moderate crowding less than 8 mm.
    • Non-extraction orthodontic treatment plan.
    • Ability and willingness to wear aligners for the required time.
    • Willingness to attend regular visits during orthodontic treatment.

Exclusion Criteria:

  • • Syndromic patients.

    • Known allergy to thermoplastic materials.
    • Patients with systemic diseases that may affect orthodontic treatment or outcome assessment.
    • Patients requiring extraction as part of orthodontic treatment.

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

  • Ensisijainen käyttötarkoitus: Hoito
  • Jako: Satunnaistettu
  • Inventiomalli: Rinnakkaistehtävä
  • Naamiointi: Kolminkertaistaa

Aseet ja interventiot

Osallistujaryhmä / Arm
Interventio / Hoito
Kokeellinen: Experimental Arm A: PETG clear aligners
Participants will receive clear aligners fabricated from polyethylene terephthalate glycol (PETG). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Muut nimet:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.
Kokeellinen: Experimental Arm B: TPU clear aligners
Participants will receive clear aligners fabricated from thermoplastic polyurethane (TPU). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Muut nimet:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Pain intensity during clear aligner therapy
Aikaikkuna: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Pain experienced by the participant will be recorded using a visual analog scale (VAS) from 0 to 10, where 0 indicates no pain and 10 indicates the worst pain.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Mucosal ulceration or soft-tissue trauma related to aligner wear
Aikaikkuna: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of ulceration or trauma from the aligner material, recorded by patient report and/or clinical assessment.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth sensitivity
Aikaikkuna: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of sensitivity in any specific tooth as reported by the participant.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth mobility
Aikaikkuna: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of tooth mobility reported or detected during follow-up.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Allergic symptoms or material-related adverse reaction
Aikaikkuna: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Any symptoms suggestive of allergy or adverse reaction to the aligner material will be recorded.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Sponsori

Tutkijat

  • Päätutkija: HARIS KHAN, BDS,FCPS, CMH Lahore medical college and IOD

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Todellinen)

Maanantai 10. elokuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Sunnuntai 15. marraskuuta 2026

Opintojen valmistuminen (Arvioitu)

Tiistai 1. joulukuuta 2026

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Perjantai 7. elokuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Maanantai 24. elokuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Torstai 27. elokuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Keskiviikko 16. syyskuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Maanantai 14. syyskuuta 2026

Viimeksi vahvistettu

Tiistai 1. syyskuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Muut tutkimustunnusnumerot

  • 194/ERC/CMH/LMC
  • 449/L-ORIC/CMH LMC (Muu apuraha/rahoitusnumero: CMH lahore medical college and institute of dentistry)

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

EI

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .