Esta página se tradujo automáticamente y no se garantiza la precisión de la traducción. por favor refiérase a versión inglesa para un texto fuente.

Patient-Reported Outcomes for Different Orthodontic Thermoplastics Used in Clear Aligners

14 de septiembre de 2026 actualizado por: CMH Lahore Medical College and Institute of Dentistry

Patient-Reported Outcomes for Different Orthodontic Thermoplastics for Clear Aligners: A Randomized Controlled Clinical Trial

Clear aligner therapy is an esthetic orthodontic treatment modality that uses removable thermoplastic trays to correct dental alignment. Different thermoplastic materials, including thermoplastic polyurethane (TPU) and polyethylene terephthalate glycol (PETG), may differ in flexibility and mechanical behavior. These material differences may influence patient-reported outcomes such as pain, mucosal ulceration, tooth sensitivity, tooth mobility, and material-related allergic symptoms. This randomized, double-blind, parallel-group clinical trial will compare patient-reported outcomes in patients treated with clear aligners fabricated from TPU versus PETG. Participants requiring non-extraction clear aligner therapy for mild to moderate crowding will be randomly allocated in a 1:1 ratio to receive aligners fabricated from either PETG or TPU. Outcomes will be recorded at five predefined time points after aligner assignment and wear: T0 before aligner wear, T1 immediately after aligner insertion/wear, T2 at day 1, T3 at day 3, and T4 at day 7.

Descripción general del estudio

Estado

Reclutamiento

Condiciones

Intervención / Tratamiento

Descripción detallada

This is a randomized, double-blind, parallel-group clinical trial conducted at the Department of Orthodontics, Institute of Dentistry, CMH Lahore Medical College, Lahore, Pakistan.

Eligible participants will be patients aged 15 to 30 years seeking orthodontic treatment with clear aligners. Patients must have permanent dentition from first molar to first molar, mild to moderate crowding less than 8 mm, and a non-extraction treatment plan.

After baseline assessment, participants will be randomized in a 1:1 ratio to receive clear aligners fabricated from PETG or TPU. Randomization will use a computer-generated sequence prepared by an independent statistician. Allocation concealment will be maintained using sealed envelopes by staff not involved in trial assessment.

The principal investigator will plan all aligner cases. Linear movements will be limited to 0.25 mm per aligner. Angular movements will be limited to 2 degrees per aligner, except torque, which will be limited to 1 degree per aligner. Each aligner will be worn for 10 days.

Patient-reported outcomes will be collected by an operator blinded to the aligner material. Participants will also be blinded to the aligner material. Outcomes include pain on a visual analog scale, ulceration or soft-tissue trauma, tooth sensitivity, tooth mobility, and symptoms suggestive of material-related allergy.

Tipo de estudio

Intervencionista

Inscripción (Estimado)

34

Fase

  • No aplica

Contactos y Ubicaciones

Esta sección proporciona los datos de contacto de quienes realizan el estudio e información sobre dónde se lleva a cabo este estudio.

Estudio Contacto

  • Nombre: HARIS KHAN, BDS, FCPS
  • Número de teléfono: +923336159951
  • Correo electrónico: drhariskhan@gmail.com

Copia de seguridad de contactos de estudio

Ubicaciones de estudio

    • Punjab Province
      • Lahore, Punjab Province, Pakistán, 54000
        • Reclutamiento
        • CMH Lahore Medical college and institue of dentistry
        • Contacto:
        • Contacto:

Criterios de participación

Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.

Criterio de elegibilidad

Edades elegibles para estudiar

  • Niño
  • Adulto

Acepta Voluntarios Saludables

Sí

Descripción

Inclusion Criteria:

  • • Patient aged between 15 and 30 years.

    • Permanent dentition, with all permanent teeth from first molar to first molar present.
    • Mild to moderate crowding less than 8 mm.
    • Non-extraction orthodontic treatment plan.
    • Ability and willingness to wear aligners for the required time.
    • Willingness to attend regular visits during orthodontic treatment.

Exclusion Criteria:

  • • Syndromic patients.

    • Known allergy to thermoplastic materials.
    • Patients with systemic diseases that may affect orthodontic treatment or outcome assessment.
    • Patients requiring extraction as part of orthodontic treatment.

Plan de estudios

Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.

¿Cómo está diseñado el estudio?

Detalles de diseño

  • Propósito principal: Tratamiento
  • Asignación: Aleatorizado
  • Modelo Intervencionista: Asignación paralela
  • Enmascaramiento: Triple

Armas e Intervenciones

Grupo de participantes/brazo
Intervención / Tratamiento
Experimental: Experimental Arm A: PETG clear aligners
Participants will receive clear aligners fabricated from polyethylene terephthalate glycol (PETG). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Otros nombres:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.
Experimental: Experimental Arm B: TPU clear aligners
Participants will receive clear aligners fabricated from thermoplastic polyurethane (TPU). Aligners will be planned for routine orthodontic alignment, including proclination, expansion, or interdental enamel reduction when clinically indicated. Each aligner will be worn for 10 days.
Clear aligners fabricated from polyethylene terephthalate glycol (PETG) thermoplastic material. Aligners will be worn for 10 days before progression to the next aligner.
Otros nombres:
  • Clear aligner fabricated from PETG thermoplastic material
Clear aligners fabricated from thermoplastic polyurethane (TPU) material. Aligners will be worn for 10 days before progression to the next aligner.

¿Qué mide el estudio?

Medidas de resultado primarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Pain intensity during clear aligner therapy
Periodo de tiempo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Pain experienced by the participant will be recorded using a visual analog scale (VAS) from 0 to 10, where 0 indicates no pain and 10 indicates the worst pain.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Medidas de resultado secundarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Mucosal ulceration or soft-tissue trauma related to aligner wear
Periodo de tiempo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of ulceration or trauma from the aligner material, recorded by patient report and/or clinical assessment.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth sensitivity
Periodo de tiempo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of sensitivity in any specific tooth as reported by the participant.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Tooth mobility
Periodo de tiempo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Presence or absence of tooth mobility reported or detected during follow-up.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Allergic symptoms or material-related adverse reaction
Periodo de tiempo: During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.
Any symptoms suggestive of allergy or adverse reaction to the aligner material will be recorded.
During each of the first four aligner cycles: before aligner insertion; immediately after aligner insertion; and 1 day, 3 days, and 7 days after aligner insertion.

Colaboradores e Investigadores

Aquí es donde encontrará personas y organizaciones involucradas en este estudio.

Patrocinador

Investigadores

  • Investigador principal: HARIS KHAN, BDS,FCPS, CMH Lahore medical college and IOD

Fechas de registro del estudio

Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados ​​por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.

Fechas importantes del estudio

Inicio del estudio (Actual)

10 de agosto de 2026

Finalización primaria (Estimado)

15 de noviembre de 2026

Finalización del estudio (Estimado)

1 de diciembre de 2026

Fechas de registro del estudio

Enviado por primera vez

7 de agosto de 2026

Primero enviado que cumplió con los criterios de control de calidad

24 de agosto de 2026

Publicado por primera vez (Actual)

27 de agosto de 2026

Actualizaciones de registros de estudio

Última actualización publicada (Actual)

16 de septiembre de 2026

Última actualización enviada que cumplió con los criterios de control de calidad

14 de septiembre de 2026

Última verificación

1 de septiembre de 2026

Más información

Términos relacionados con este estudio

Otros números de identificación del estudio

  • 194/ERC/CMH/LMC
  • 449/L-ORIC/CMH LMC (Otro número de subvención/financiamiento: CMH lahore medical college and institute of dentistry)

Plan de datos de participantes individuales (IPD)

¿Planea compartir datos de participantes individuales (IPD)?

NO

Información sobre medicamentos y dispositivos, documentos del estudio

Estudia un producto farmacéutico regulado por la FDA de EE. UU.

No

Estudia un producto de dispositivo regulado por la FDA de EE. UU.

No

Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .