Thermographic Analysis of Hemodynamics Changes Through & Following Wingate Test

May 8, 2022 updated by: Mickey Scheinowitz, PhD, Tel Aviv University

Remote Sensing and Measurements of Hemodynamic Changes in Blood Flow for Wingate Anaerobic Test Using a Novel Image Processing Algorithm.

Remote sensing and measurements of hemodynamic changes in blood flow for Wingate Anaerobic test using a novel image processing algorithm. The algorithm calculates the heat distribution from the thermal images and assesses the changes in blood flow and temperatures in the torso and legs for each individual participant.

Study Overview

Status

Completed

Conditions

Detailed Description

Remote sensing and measurements of hemodynamic changes in blood flow during and following the Wingate Anaerobic test using Infra-Red (IR) cameras with novel image processing algorithms. The algorithm calculates the heat distribution from the thermal images and computes the changes in temperatures measured in the torso and that measured in the lower limbs before the test, immediately after, and during 10 minutes recovery period.

Background Thermal imaging The human body is self-generating and regulates the essential levels of temperature for survival. The body core is relatively stable in temperature, but the shell of the body (the surface tissues, which are mainly the skin) forms part of the regulatory process. Body temperature has been used to study many diseases where skin temperature can depict the presence of inflamation in underlying tissues, or where blood flow is increased or decreased because of a clinical abnormality. Thermal imaging has been investigated for numerous medical applications. Several studies reviewed medical thermography [1-3]. Thermal imaging has been investigated for bowel ischemia [4], fever screening [5], diabetic foot, vascular disorder [6], thermoregulation study [7], and breast cancer [8].

Wingate Test In the last 50 years, the Wingate Test is considered to be a common standard for the assessment of the anaerobic capability of athletes. The test is usually performed on computerized stationary bikes, while the participant has to pedal as hard as possible for only 30 seconds at resistance equivalent to 0.075 of their body weights (3).

A previous study (4) has shown a high correlation between the effective power generated and the hemodynamic changes between the leg muscles and the thoracic area of the participant.

Acute hemodynamic changes are the result of intensive vasodilation of metarterioles surrounding the main leg muscles and heavy blood perfusion. The massive blood flow in these areas causes congestion and slows the venous return to the heart.

During this phase, we expect to see significant temperature change between the warm legs, and relatively cooler heart (torso). As the recovery phase progress, we expect to see the legs cool down and the torso warms up until homeostasis is reached.

Thermal imaging and analysis The thermal imaging analysis will be performed using MATLAB software to extract two main features: mean temperature and the entropy, in a selected region-of-interest (ROI). First, the thermal image parameters will be stored in an EXCEL file as a two-dimensional matrix of temperature values. Then, the image (CSV file) is read to the program and the entire matrix is divided into the maximal temperature in the image. This yields a set of normalized temperatures in which the maximal value is 1 and which will be measured at rest, before the Wingate test has been performed. (This normalization is required to obtain correct entropy values using the MATLAB command.) The image is then resized fourfold in each axis and the result is displayed to the user. The user manually selects from this image a rectangular region, and the program extracts the mean value and the entropy of this region. The obtained mean value is multiplied by the maximal temperature in the original image (before normalization) to get the actual mean temperature (rather than the normalized temperature) in the selected ROI.

The main study goal suggests a correlation between the power generated during the 30 seconds of the Wingate Test and the temperature difference between the hot legs and relatively cold torso.

Method: 16 - 20 participants (10 men + 10 Women) healthy, age: 18-38, with some sports experience.

Candidates will be screened by questionnaire + verbal interview, and then they'll sign the Voluntary Informed Consent form (copy attached). Each participant will do his test alone for about one hour.

Test procedure: 5 minutes of warm-up, 2 minutes rest, ½ minute test, 10-15 minutes staying relaxed on the bike while the IR cameras are taking photographs synchronously every minute.

Data gathering: 3 IR cameras (ONE Pro) will be fixed on 3 tripods, one for each leg, and one for the torso photographing. A Voice recorder will record every individual test completely.

Data analysis The picture analysis will provide us with average (right & left) legs and torso temperatures every minute from test start and 15 minutes later.

The SRM® bike computer will produce a power graph over 30 seconds of the test + Heart Rate recording of the participant for 15 minutes.

Assuming a positive correlation between the average output power, and the temperature difference (legs vs torso), we'll draw a graph of all participants.

Additional outcome results: Time required to full recovery - homeostasis, Heart Rate (HR) changes during recovery time. We may compare these additional results to the main correlation graph.

Study Type

Observational

Enrollment (Actual)

24

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

    • POBox 39040,
      • Tel Aviv, POBox 39040,, Israel, 6997801
        • Tel Aviv University

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

18 years to 38 years (ADULT)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Sampling Method

Probability Sample

Study Population

Israeli volunteers

Description

Inclusion criteria:

  • Age 18 up to 38 years old
  • Good health record
  • Sports experience of minimum 2 years

Exclusion criteria:

  • Recorded health issues
  • Sedentary type people

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

Cohorts and Interventions

Group / Cohort
Young Male
Healthy men with some sport experience
Young Female
Healthy female with some sport experience

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Temperatures of face, torso and legs, during and following Wingate Tests
Time Frame: 30 minutes
The calculated skin area temperatures, following the sensing and measurements of temperature changes during and following the Wingate Anaerobic Test, using a novel image processing algorithm. The algorithm calculates the heat distribution from the thermal images and assesses the temperature changes in the face, torso, and legs of each individual participant.
30 minutes

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Participant's maximum anaerobic legs power on SRM® bicycles
Time Frame: 30 seconds
This specific Wingate test is performed on SRM® stationary bicycles. SRM computer adjusts the bicycle's resistance to match the maximum capability of the participant while measuring and recording the applied power in watts, over a period of 30 seconds.
30 seconds
Time required to full recovery - homeostasis
Time Frame: 10 - 15 minutes
Measuring the time from test end, until hemodynamics homeostasis returns
10 - 15 minutes

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: Mickey Schenowitz, Prop. FACSM, Tel Aviv University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (ACTUAL)

March 1, 2021

Primary Completion (ACTUAL)

September 13, 2021

Study Completion (ACTUAL)

September 13, 2021

Study Registration Dates

First Submitted

April 25, 2022

First Submitted That Met QC Criteria

May 4, 2022

First Posted (ACTUAL)

May 5, 2022

Study Record Updates

Last Update Posted (ACTUAL)

May 12, 2022

Last Update Submitted That Met QC Criteria

May 8, 2022

Last Verified

May 1, 2022

More Information

Terms related to this study

Other Study ID Numbers

  • TAU BioMed 123456

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

YES

IPD Plan Description

Coded list for all participants. Data per participant will include: Performed power, Heart rate, body temperature map

IPD Sharing Time Frame

During all tests effective time, current - until December 31st, 2021

IPD Sharing Access Criteria

Coded details, as a part for a planned medical article

IPD Sharing Supporting Information Type

  • STUDY_PROTOCOL
  • ICF
  • CSR

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Health, Subjective

3
Subscribe