Ta strona została przetłumaczona automatycznie i dokładność tłumaczenia nie jest gwarantowana. Proszę odnieść się do angielska wersja za tekst źródłowy.

Comparison Physiological Tooth Mobility and Retention Success in Patients Using Different Retainers

30 sierpnia 2026 zaktualizowane przez: gulden karabiber, Marmara University
The purpose of this prospective clinical study is to comparatively evaluate the long-term stability of teeth, physiological tooth mobility, and effects on periodontal tissues of three different fixed lingual retainer materials used to prevent relapse following orthodontic treatment. A total of 80 participants whose orthodontic treatment is completed will be randomly and equally distributed into four groups as one control (n=20) and three study groups (n=20 each): Group 1 will receive CAD/CAM-fabricated 0.016-inch Nitinol wire; Group 2 will receive manually bent multi- strand 0.0215-inch stainless steel wire; and Group 3 will receive 0.030-inch stainless steel chain retainers. Control group will be 20 samples. Clinical and radiographic measurements will be performed at the day of debonding (T0) and at a 6-month follow-up (T1). Physiological tooth mobility will be measured objectively using a Periotest device. Relapse amounts will be assessed by superimposing intraoral digital scans via Nemocast software using Little's Irregularity Index, and the 6-month failure/breakage rates of the retainers will be recorded. The null hypothesis states that there is no statistically significant difference among the different retainer materials regarding tooth stability, relapse, and physiological mobility.

Przegląd badań

Status

Aktywny, nie rekrutujący

Warunki

Interwencja / Leczenie

Typ studiów

Obserwacyjny

Zapisy (Szacowany)

80

Kontakty i lokalizacje

Ta sekcja zawiera dane kontaktowe osób prowadzących badanie oraz informacje o tym, gdzie badanie jest przeprowadzane.

Lokalizacje studiów

Kryteria uczestnictwa

Badacze szukają osób, które pasują do określonego opisu, zwanego kryteriami kwalifikacyjnymi. Niektóre przykłady tych kryteriów to ogólny stan zdrowia danej osoby lub wcześniejsze leczenie.

Kryteria kwalifikacji

Wiek uprawniający do nauki

  • Dorosły

Akceptuje zdrowych ochotników

Tak

Metoda próbkowania

Próbka prawdopodobieństwa

Badana populacja

Healthy volunteers whose orthodontic treatment finalized and who waited for taking off braces.

Opis

Inclusion Criteria:

  1. Patients who have undergone fixed orthodontic treatment at the Department of Orthodontics, Faculty of Dentistry, Marmara University, and whose treatment is nearing completion
  2. Patients whose treatment duration is between 2 and 3 years
  3. Patients with healthy periodontal tissue (plaque index and gingival index <1; bleeding on probing <10 per cent; no clinical attachment loss)
  4. Patients aged between 18 and 35
  5. Systemically healthy individuals
  6. Patients with deep bite for whom Nitinol wire retainers, manufactured using CAD/CAM technology and capable of being fitted without occlusal contact due to their adaptability to the occlusion, have been applied
  7. Patients for whom impressions cannot be taken to fabricate a retainer
  8. Patients without deep bite or a gag reflex who have had a standard retainer fitted

Exclusion Criteria:

  1. Patients who have undergone orthodontic treatment at another clinic
  2. Patients whose treatment lasted longer than 3 years or less than 2 years
  3. Patients with a cleft lip and palate or a related syndrome
  4. Patients with caries or dental prostheses on the teeth where the retainer is to be bonded
  5. Smokers
  6. Individuals with missing anterior teeth
  7. Individuals taking systemic medication that affects the immune system or may affect periodontal health (e.g. steroids)
  8. Pregnant or breastfeeding women

Plan studiów

Ta sekcja zawiera szczegółowe informacje na temat planu badania, w tym sposób zaprojektowania badania i jego pomiary.

Jak projektuje się badanie?

Szczegóły projektu

Kohorty i interwencje

Grupa / Kohorta
Interwencja / Leczenie
1. Control
healthy gingiva, no smoking, non-pregnant, age:18-35, patients did not receive any orthodontic treatment and don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
2. CAD-CAM Nitinol wire (Memotain)
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
3. Manually bent 6 multi- strand 0.0215-inch stainless steel wire
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.
4. 0.030-inch stainless steel chain
Just finished orthodontic treatment, healthy gingiva, no smoking, non-pregnant, age:18-35, patients don't have bruxism and syndrome
T0 Mobility measurement with Periotest device after orthodontic treatment finished; before retainer simantation and after simantation. T1 Mobility measurement with Periotest device 6 months later; with retainer and without retainer.
T0 digital dental models will be taken with 3D scanner after orthodontic treatment finished; after retainer simantation. T1 digital dental models will be taken 6 months later with retainer. And Little irregularity index, arch length measurement will be performed.

Co mierzy badanie?

Podstawowe miary wyniku

Miara wyniku
Opis środka
Ramy czasowe
Tooth mobility
Ramy czasowe: From enrollment to the end of treatment at 6 months
Tooth mobility will be assessed using the Periotest device. The device will be applied to the buccal surface of the tooth, and the Periotest value (PTV) will be recorded according to the manufacturer's instructions. Higher PTV values indicate greater tooth mobility. Measurements will be recorded as Periotest values (PTV).
From enrollment to the end of treatment at 6 months

Miary wyników drugorzędnych

Miara wyniku
Opis środka
Ramy czasowe
Little irregularity
Ramy czasowe: From enrollment to the end of treatment at 6 months
Anterior dental irregularity will be assessed using Little's Irregularity Index, measured as the sum of the five linear displacements between the anatomic contact points of the mandibular anterior teeth, in millimeters (mm). This assessment will be performed on digital intraoral models by using Orthomodel (Orthomodel, İstanbul, Türkiye) software.
From enrollment to the end of treatment at 6 months
Arch length
Ramy czasowe: From enrollment to the end of treatment at 6 months
Dental arch length will be assessed by measuring the linear distance from the midpoint between the central incisors to a line connecting the distal surfaces of the first permanent molars, in millimeters (mm). This assessment will be performed on digital intraoral models by using Orthomodel (Orthomodel, İstanbul, Türkiye) software.
From enrollment to the end of treatment at 6 months

Współpracownicy i badacze

Tutaj znajdziesz osoby i organizacje zaangażowane w to badanie.

Sponsor

Publikacje i pomocne linki

Osoba odpowiedzialna za wprowadzenie informacji o badaniu dobrowolnie udostępnia te publikacje. Mogą one dotyczyć wszystkiego, co jest związane z badaniem.

Daty zapisu na studia

Daty te śledzą postęp w przesyłaniu rekordów badań i podsumowań wyników do ClinicalTrials.gov. Zapisy badań i zgłoszone wyniki są przeglądane przez National Library of Medicine (NLM), aby upewnić się, że spełniają określone standardy kontroli jakości, zanim zostaną opublikowane na publicznej stronie internetowej.

Główne daty studiów

Rozpoczęcie studiów (Rzeczywisty)

15 czerwca 2026

Zakończenie podstawowe (Szacowany)

1 stycznia 2027

Ukończenie studiów (Szacowany)

1 marca 2027

Daty rejestracji na studia

Pierwszy przesłany

19 lipca 2026

Pierwszy przesłany, który spełnia kryteria kontroli jakości

30 sierpnia 2026

Pierwszy wysłany (Rzeczywisty)

3 września 2026

Aktualizacje rekordów badań

Ostatnia wysłana aktualizacja (Rzeczywisty)

3 września 2026

Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości

30 sierpnia 2026

Ostatnia weryfikacja

1 czerwca 2026

Więcej informacji

Terminy związane z tym badaniem

Inne numery identyfikacyjne badania

  • GKAY-ret

Plan dla danych uczestnika indywidualnego (IPD)

Planujesz udostępniać dane poszczególnych uczestników (IPD)?

NIEZDECYDOWANY

Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .