Bioequivalence Study of the Fixed Dose Combination of 5 mg Saxagliptin and 500 mg Metformin XR Tablet (Manufactured in Mt Vernon, IN) Relative to 5 mg Saxagliptin Tablet and 500 mg Metformin XR Tablet (Manufactured in Evansville, IN)
Bioequivalence Study of the Fixed Dose Combination of 5 mg Saxagliptin and 500 mg Metformin XR Tablet (Manufactured in Mt Vernon, IN) Relative to 5 mg Saxagliptin Tablet and 500 mg Metformin XR Tablet (Manufactured in Evansville, IN) Coadministered to Healthy Subjects in a Fed Condition
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Detailed Description
Study Type
Study Type
Enrollment (Actual)
Enrollment
Phase
Phase
- Phase 1
Contacts and Locations
Study Locations
-
-
Texas
-
Austin, Texas, United States, 78744
- PPD Development, LP
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
Accepts Healthy Volunteers
Genders Eligible for Study
Description
Inclusion Criteria:
- Healthy male and female subjects as determined by no clinically significant deviation from normal in medical history, physical examination, electrocardiogram (ECG), and clinical laboratory determinations
- Body Mass Index (BMI) of 18 to 32 kg/m2, inclusive
- Ages 18 to 45, inclusive
Exclusion Criteria:
- Evidence of organ dysfunction or any clinically significant deviation from normal in physical examination, vital signs, ECG or clinical laboratory determinations beyond what is consistent with the target population
- Major surgical procedure within 4 weeks prior to randomization
- Positive serology test for human immunodeficiency virus (HIV), hepatitis B virus (HBV) or hepatitis C virus (HCV)
- Clinically significant history or presence of any of the following conditions: heart, liver, or kidney disease, neurologic or psychiatric disease
- History of gastrointestinal disease within the past 3 months
- Any clinically significant medical condition that could potentially affect your participation in the study and/or personal well-being, as judged by the investigator
- Donated blood or blood products to a blood bank, blood transfusion or participated in a clinical study (except a screening visit) requiring withdrawal of blood within 4 weeks prior to randomization
- Unable to tolerate oral and/or intravenous (IV) medications
- Unable to tolerate the puncturing of veins for drawing of blood
- Known allergy or hypersensitivity to any component of the study medication
- History of any significant drug allergies (such as anaphylaxis or hepatotoxicity)
- Used any prescription drugs or over the counter products to control acid (for example, Prevacid, Mylanta or Rolaids) within 4 weeks prior to randomization
- Used any other drugs including over the counter medications and herbal preparations within 1 week prior to randomization
- Taken any investigational drug or placebo (inactive drug) within 4 weeks prior to randomization
Study Plan
How is the study designed?
Design Details
- Allocation: Randomized
- Interventional Model: Crossover Assignment
- Masking: None (Open Label)
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Experimental: 5 mg saxagliptin + a single 500 mg metformin XR tablet
|
Tablets, Oral, 5 mg, once daily, Single dose
Other Names:
Tablets, Oral, 500 mg.
once daily, Single dose
Other Names:
|
|
Experimental: FDC tablet (5 mg saxagliptin + 500 mg metformin XR) (Fed)
under fed state
|
Tablet, Oral, (saxagliptin 5 mg)(metformin XR 500 mg), once daily, Single dose
|
|
Experimental: FDC tablet (5 mg saxagliptin + 500 mg metformin XR) (Fasting)
under fasted state
|
Tablet, Oral, (saxagliptin 5 mg)(metformin XR 500 mg), once daily, Single dose
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Saxagliptin Area Under the Plasma Concentration Versus Time Curve From Time 0 Extrapolated to Infinity (AUC[0-inf])
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 extrapolated to infinity; calculated as AUC0-t [calculated using the linear trapezoidal rule] + Ct/Kel, where Ct was the last measurable concentration and Kel was the terminal rate constant
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Saxagliptin Observed Maximum Plasma Concentration (Cmax)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Metformin AUC(0-inf)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 extrapolated to infinity; calculated as AUC0-t [calculated using the linear trapezoidal rule] + Ct/Kel, where Ct was the last measurable concentration and Kel was the terminal rate constant
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Metformin Cmax
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Secondary Outcome Measures
Secondary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Saxagliptin Terminal Half-life (T1/2)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
terminal half life; calculated as ln(2)/Kel
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Saxagliptin Area Under the Plasma Concentration Versus Time Curve From Time 0 to the Time of the Last Quantifiable Concentration (AUC[0-t])
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 to the time of the last quantifiable concentration (Ct), calculated using the linear trapezoidal rule.
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Time to Achieve the Observed Maximum Saxagliptin Plasma Concentration (Tmax)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Saxagliptin Fraction of AUC(0-inf) Contributed by AUC(0-t) (AUC[0-t]/AUC[0-inf])
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Active Metabolite BMS-510849 AUC(0-inf)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 extrapolated to infinity; calculated as AUC0-t [calculated using the linear trapezoidal rule] + Ct/Kel, where Ct was the last measurable concentration and Kel was the terminal rate constant
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Active Metabolite BMS-510849 AUC(0-t)
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 to the time of the last quantifiable concentration (Ct), calculated using the linear trapezoidal rule.
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Active Metabolite BMS-510849 Cmax
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Active Metabolite BMS-510849 T1/2
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
terminal half life; calculated as ln(2)/Kel
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
Active Metabolite BMS-510849 Tmax
Time Frame: Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (samples taken before dosing, and at 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Active Metabolite BMS-510849 AUC(0-t)/AUC(0-inf)
Time Frame: Period 1 (samples taken before dosing, and at 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
Period 1 (samples taken before dosing, and at 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
|
|
Metformin AUC(0-t)
Time Frame: Period 1 (samples taken before dosing, and at 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
Area under the plasma concentration versus time curve from time 0 to the time of the last quantifiable concentration (Ct), calculated using the linear trapezoidal rule.
|
Period 1 (samples taken before dosing, and at 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
|
Metformin T1/2
Time Frame: Period 1 (before dosing, 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
terminal half life; calculated as ln(2)/Kel
|
Period 1 (before dosing, 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
|
Metformin Tmax
Time Frame: Periods 1, 2, and 3 (before dosing, 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
Periods 1, 2, and 3 (before dosing, 0.167, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 24, 36 and 48 hours after dosing)
|
|
|
Metformin Fraction of AUC(0-inf) Contributed by AUC(0-t)(AUC[0-t]/AUC[0-inf])
Time Frame: Period 1 (before dosing, 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
Period 1 (before dosing, 0.167,0.25,0.5,0.75,1,1.5,2,3,4,5,6,7,8,10,12,18,24,36 and 48 hours after dosing)
|
|
|
Safety: Adverse Events (AEs), Discontinuations Due to AEs, Deaths, and Serious AEs (SAEs)
Time Frame: AEs: from initiation of study drug administration on Day 1/Period 1 through study discharge Day 3/Period 3. SAEs: from date of written consent until 30 days after discontinuation of dosing or participation in study if last scheduled visit occurred later.
|
AE=any new untoward medical occurrence or worsening of a pre-existing medical condition in a subject administered an investigational product and that does not necessarily have a causal relationship with this treatment.
SAE=any untoward medical occurrence that results in death, is life-threatening, requires or prolongs inpatient hospitalization (including elective surgery), results in persistent or significant disability/incapacity, is a congenital anomaly/birth defect, or is an important medical event.
|
AEs: from initiation of study drug administration on Day 1/Period 1 through study discharge Day 3/Period 3. SAEs: from date of written consent until 30 days after discontinuation of dosing or participation in study if last scheduled visit occurred later.
|
|
Safety: Clinically Significant Laboratory, Vital Sign, Physical Examination, and Electrocardiogram (ECG) Abnormalities
Time Frame: From Day 1 of Period 1 through Day 3 of Period 3 (study discharge)
|
Abnormalities considered by the investigator to be clinically significant and/or reported as an AE.
|
From Day 1 of Period 1 through Day 3 of Period 3 (study discharge)
|
Collaborators and Investigators
Sponsor
Sponsor
Publications and helpful links
Study record dates
Study Major Dates
Study Start
Study Start
Primary Completion (Actual)
Primary Completion
Study Completion (Actual)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Estimate)
First Posted
Study Record Updates
Last Update Posted (Estimate)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
Other Study ID Numbers
- CV181-111
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
product manufactured in and exported from the U.S.
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.