Comparison of Conventional Versus 3-D Printed Complete Denture Regarding Retention, Accuracy, Elctromyographic Activity and Patient Satisfaction.

April 27, 2023 updated by: Shereen Kabeel, Al-Azhar University

Electromyographic Activity, Accuracy, Patient Satisfaction and Retention of Conventional Versus 3-D Printed Maxillary Complete Denture: A Cross-over Randomized Controlled Trial

Analyzing and comparing the retention, accuracy, EMG and patient satisfaction of maxillary complete denture base fabricated by conventional and rapid prototyping techniques.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
10

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Egypt
      • Cairo, Egypt
        • Faculty of Dentistry, AlAzhar University for Girls

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Elligibility Criteria:

Inclusion Criteria:

  • Completely edentulous patients were selected to have their ridges covered with firm, thick and compressible mucosa
  • All patients accepting prosthodontic treatment by an removable denture.

Exclusion Criteria:

  • TMJ disorder.
  • Limited mouth opening or mandibular movement
  • Muscle spasm or tenderness
  • Mandibular deviation

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Single

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
No Intervention: Conventional Complete Denture
Experimental: 3 D printed Complete Denture
Other: 3D Printed Complete Dentures
Denture bases printed from a pre-polymerized block via additive technique, using photon S desktop 3D printer* that relies on SLA technology and post cured by post curing unit.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Change of Retention
Time Frame: 3 months
Retention was measured for both groups using the universal testing machine. Modification in each denture was made where two small metal tubes (3 mm diameters) were placed a few millimeters above the laterals in maxillary dentures by self-cure acrylic resin. The distance between the right tube and the geometric center was almost the same distance as between the left tube and the geometric center. The exact distance was checked using an orthodontic wire.
3 months

Other Outcome Measures

Other Outcome Measures

For clinical trials, a planned measurement described in the protocol that is used to determine the effect of an intervention/treatment on participants. For observational studies, a measurement or observation that is used to describe patterns of diseases or traits, or associations with exposures, risk factors, or treatment. Types of outcome measures include primary outcome measure and secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Accuracy
Time Frame: up to 1 week
The fitting surfaces of each upper denture was sprayed and scanned after finishing and before delivery, then was saved as an STL file after flipping of the denture's fitting surface to resemble the cast surface. Geomagic software was used to evaluate the accuracy at which the master cast STL file was selected as a reference data and the STL file of the flipped fitting surface of the denture was selected as a measured data. Both files were automatically aligned together by selecting the "best fit alignment "icon. The accuracy of the denture bases generated in a color map according to the 3D deviation between the denture base and reference data. Blue color indicates negative deviation (tissue compression), yellow to red color indicates positive deviation (misfit with space) while green color indicates measured deviation below 0.2mm.
up to 1 week
Electromyography Change
Time Frame: 3 months
The electromyographic activity was recorded for each patient by Nemus 2 machine. Washing period of 2 weeks between each denture as the same in masticatory efficiency and recorded as follow: The electromyographic activity was performed by measuring muscle activity of the masseter muscle on both sides
3 months
Change of Patient satisfaction
Time Frame: 3 months
Patient satisfaction was investigated through a questionnaire, which was given to the patients. Evaluation of patient satisfaction was measured using the visual analogue scale (VAS) in which patients scored their answers using a scale from 0 to 10 cm (low/worst to high/best).
3 months

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Al-Azhar University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
December 1, 2021

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
August 1, 2022

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
December 1, 2022

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
January 22, 2023

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 27, 2023

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
April 28, 2023

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
April 28, 2023

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 27, 2023

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
April 1, 2023

More Information

Terms related to this study

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • REC-PD-22-21

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

UNDECIDED

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Edentulous Mouth

Clinical Trials on 3D Printed Complete Dentures

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings