Inkrementální a decimentní titrace PEEP různými strategiemi u subjektů s ARDS: prospektivní fyziologická studie (ARDS,PEEP)
Výzkum přesných individualizovaných mechanických ventilačních strategií pro ARDS vedený monitorováním a hodnocení rozdílů ve ventilaci a distribuci perfúze s elektrickou impedancí
Přehled studie
Postavení
Postavení
Podmínky
Podmínky
Intervence / Léčba
Intervence / Léčba
Typ studie
Typ studie
Zápis (Aktuální)
Zápis
Kontakty a umístění
Studijní místa
-
-
Sichuan
-
Chengdu, Sichuan, Čína, 610041
- West China Hospital of Sichuan University, Chengdu
-
-
Kritéria účasti
Kritéria způsobilosti
Kritéria způsobilosti
Věk způsobilý ke studiu
- Dospělý
- Starší dospělý
Přijímá zdravé dobrovolníky
Metoda odběru vzorků
Studijní populace
Popis
Kritéria pro zařazení:
- Intubovaní a mechanicky větrané pacienty na JIP do 48 hodin
- Být starší 18 let
- S mírným severem ARDS (PAO2 /FIO2, 200 mm Hg)
Kritéria pro vyloučení:
- Těžká chronická obstrukční plicní onemocnění
- Plicní bulla (> 1 cm) nebo pneumotorax nebo pneumomediastinum nebo subkutánní emfyzém
- Těhotenství
- BMI≥35 kg/m2
- Podezření na plicní vaskulární krvácení
- Narušení vědomí nebo intrakraniální hypertenze
- Těžká srdeční dysfunkce (New York Heart Association Class III nebo IV, akutní -koronární syndrom nebo přetrvávající komorová tachyarhytmie), kardiogenní šok nebo po velké srdeční chirurgii
- Hemodynamická nestabilita (tj. Průměrný arteriální tlak [mapa] <60 mm Hg navzdory použití vasopresoru
- Lékařský tým zvažuje krátká období vysokého tlaku jako nebezpečné
- Kontraindikace pro umístění tlakových katétrů jícnu (např. Ezofageální varix nebo zlomeninu lebky)
- Kontraindikace pro monitorování EIT (včetně kardiostimulátoru nebo kožních onemocnění, které omezují umístění elektrod)
- Agonální fáze nebo konečné stadia nemocí
Studijní plán
Jak je studie koncipována?
Detaily designu
Co je měření studie?
Primární výstupní opatření
Primární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
the selected PEEP values
Časové okno: through study completion, an average of 1 year
|
1. Method-specific selected PEEP values
|
through study completion, an average of 1 year
|
Sekundární výstupní opatření
Sekundární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
SpO2/FiO2 at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
SpO2/FiO2 measured at each selected PEEP.
This study will separately measure peripheral oxygen saturation (SpO₂, unit: %) and fraction of inspired oxygen (FiO₂, unit: %).
Because both measurements share the same unit (%), they will not be reported as separate outcome measures.
Instead, they will be aggregated into a single reported value: the SpO₂/FiO₂ ratio (dimensionless).
At each selected positive end-expiratory pressure (PEEP) level, the ratio will be calculated as S/F = SpO₂ (%) ÷ FiO₂ (%), and this ratio will be recorded as the final outcome measure.
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
respiratory system compliance value at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
This study will directly record the respiratory system compliance value as measured and displayed by the ventilator (unit: mL/cmH₂O) at each selected PEEP.
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
plateau pressure at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
At each selected positive end-expiratory pressure (PEEP) level, plateau pressure will be directly recorded from the ventilator after performing an inspiratory hold maneuver.
This value is displayed by the ventilator in cmH₂O
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
Driving Pressure at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
At each selected positive end-expiratory pressure (PEEP) level, plateau pressure (Pplat, unit: cmH₂O) will be measured via the ventilator, and the corresponding PEEP value (unit: cmH₂O) will be recorded.
Driving pressure (ΔP) is calculated as the difference between the two: ΔP = Pplat - PEEP (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
End-inspiratory Transpulmonary Pressure (PTPi) at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor esophageal pressure (Pes) and airway pressure.
At each selected positive end-expiratory pressure (PEEP) level, an end-inspiratory hold maneuver will be performed.
The end-inspiratory transpulmonary pressure (PTPi) is calculated as the difference between the airway plateau pressure (Pplat) measured during the hold and the corresponding esophageal pressure (Pes): PTPi = Pplat - Pes (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
End-expiratory Transpulmonary Pressure (PTPe) at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor esophageal pressure (Pes) and airway pressure.
At each selected positive end-expiratory pressure (PEEP) level, an end-expiratory hold maneuver will be performed.
The end-inspiratory transpulmonary pressure (PTPe) is calculated as the difference between the PEEP measured during the hold and the corresponding esophageal pressure (Pes): PTPe = PEEP - Pes (unit: cmH₂O).
This calculated value is the single reported outcome measure
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
transpulmonary driving pressure at each selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor transpulmonary pressures.
At each selected PEEP level, end-inspiratory transpulmonary pressure (PTPi) and end-expiratory transpulmonary pressure (PTPe) are obtained during inspiratory and expiratory hold maneuvers, respectively.
Both are measured in cmH₂O.
Transpulmonary driving pressure is calculated as the difference: ΔPtp = PTPi - PTPe (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
EIT-derived Regional Ventilation Parameters at each selected PEEP level
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT), the lung is divided into four regions of interest (ROI I to ROI IV) from ventral to dorsal.
For each ROI, the percentage of tidal impedance variation relative to total tidal impedance variation is recorded (% of total).
unit: cmH₂O
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
the center of ventilation (COV) at each selected PEEP level
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
the center of ventilation (COV) is calculated as the position of the ventilation center along the ventral-dorsal axis, expressed as a percentage (0% = ventral, 100% = dorsal).
this parameter is measured in %
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
CL HP% (overdistension region) at each selected PEEP level
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT),based on regional compliance analysis,CL HP% represent the percentage of lung regions showing a decrease in compliance at high PEEP due to overdistension (unit: %).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
CL LP% (collapse region) at selected PEEP
Časové okno: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT),based on regional compliance analysis,CL LP% represent the percentage of lung regions showing a decrease in compliance at low PEEP due to collapse (unit: %).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Spolupracovníci a vyšetřovatelé
Sponzor
Sponzor
Termíny studijních záznamů
Hlavní termíny studia
Začátek studia (Aktuální)
Začátek studia
Primární dokončení (Aktuální)
Primární dokončení
Dokončení studie (Aktuální)
Dokončení studie
Termíny zápisu do studia
První předloženo
První předloženo
První předloženo, které splnilo kritéria kontroly kvality
První předloženo, které splnilo kritéria kontroly kvality
První zveřejněno (Aktuální)
První zveřejněno
Aktualizace studijních záznamů
Poslední zveřejněná aktualizace (Aktuální)
Poslední zveřejněná aktualizace
Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality
Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality
Naposledy ověřeno
Naposledy ověřeno
Více informací
Termíny související s touto studií
Další identifikační čísla studie
Další identifikační čísla studie
- PEEP Titration
- 2024YFFK0329 (Jiné číslo grantu/financování: Sichuan Science and Technology Program)
- 2024ZD0530000 (Jiné číslo grantu/financování: Noncommunicable Chronic Diseases-National Science and Technology Major Project)
Plán pro data jednotlivých účastníků (IPD)
Plánujete sdílet data jednotlivých účastníků (IPD)?
Informace o lécích a zařízeních, studijní dokumenty
Studuje lékový produkt regulovaný americkým FDA
Studuje produkt zařízení regulovaný americkým úřadem FDA
produkt vyrobený a vyvážený z USA
Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .