ARDS -potilailla, joilla on ARDS: n monimuotoisten strategioiden inkrementaalinen ja vähentävä peep -titraus: Mahdollinen fysiologinen tutkimus (ARDS,PEEP)
Tarkkuuden yksilöllisten mekaanisten tuuletusstrategioiden tutkimus ARDS: lle
Tutkimuksen yleiskatsaus
Tila
Tila
Ehdot
Ehdot
Interventio / Hoito
Interventio / Hoito
Opintotyyppi
Opintotyyppi
Ilmoittautuminen (Todellinen)
Ilmoittautuminen
Yhteystiedot ja paikat
Opiskelupaikat
-
-
Sichuan
-
Chengdu, Sichuan, Kiina, 610041
- West China Hospital of Sichuan University, Chengdu
-
-
Osallistumiskriteerit
Kelpoisuusvaatimukset
Kelpoisuusvaatimukset
Opintokelpoiset iät
- Aikuinen
- Vanhempi Aikuinen
Hyväksyy terveitä vapaaehtoisia
Näytteenottomenetelmä
Tutkimusväestö
Kuvaus
Sisällyttämiskriteerit:
- Intubated ja mekaaniset tuuletetut potilaat ICU: ssa 48 tunnin sisällä
- Olla yli 18 -vuotias
- Kohtalaisen vaaran ARDS: llä (PAO2 /FIO2, 200 mm Hg)
Poissulkemiskriteerit:
- Vakavat krooniset obstruktiiviset keuhkosairaudet
- Keuhkojen bulla (> 1 cm) tai pneumotorax tai pneumomediastinum tai ihonalainen emfyseema
- Raskaus
- BMI≥35 kg/m2
- Epäilty keuhkoverisuonen verenvuoto
- Tietoisuuden häiriöt tai kallonsisäinen verenpaine
- Vakava sydämen toimintahäiriö (New York Heart Association -luokka III tai IV, akuutin koronarinen oireyhtymä tai jatkuva kammion takyarytmia), kardiogeeninen shokki tai suuren sydämen leikkauksen jälkeen
- Hemodynaaminen epävakaus (ts. Keskimääräinen valtimopaine [MAP] <60 mm Hg vasopressorin käytöstä huolimatta
- Lääketieteellinen ryhmä, joka harkitsee lyhyitä korkeapaineja, jotka ovat vaarallisia
- Vasta -aiheet ruokatorven painekaterien sijoittamiseen (esim. Ruokatorven varsi tai kallopohjan murtuma)
- EIT -seurannan vasta -aiheet (mukaan lukien sydämentahdistimet tai ihon sairaudet, jotka rajoittavat elektrodin sijoittelua)
- Agonal vaihe tai sairauksien loppuvaiheet
Opintosuunnitelma
Miten tutkimus on suunniteltu?
Suunnittelun yksityiskohdat
Mitä tutkimuksessa mitataan?
Ensisijaiset tulostoimenpiteet
Ensisijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
the selected PEEP values
Aikaikkuna: through study completion, an average of 1 year
|
1. Method-specific selected PEEP values
|
through study completion, an average of 1 year
|
Toissijaiset tulostoimenpiteet
Toissijaiset tulostoimenpiteet
Tulosmittaus |
Toimenpiteen kuvaus |
Aikaikkuna |
|---|---|---|
|
SpO2/FiO2 at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
SpO2/FiO2 measured at each selected PEEP.
This study will separately measure peripheral oxygen saturation (SpO₂, unit: %) and fraction of inspired oxygen (FiO₂, unit: %).
Because both measurements share the same unit (%), they will not be reported as separate outcome measures.
Instead, they will be aggregated into a single reported value: the SpO₂/FiO₂ ratio (dimensionless).
At each selected positive end-expiratory pressure (PEEP) level, the ratio will be calculated as S/F = SpO₂ (%) ÷ FiO₂ (%), and this ratio will be recorded as the final outcome measure.
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
respiratory system compliance value at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
This study will directly record the respiratory system compliance value as measured and displayed by the ventilator (unit: mL/cmH₂O) at each selected PEEP.
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
plateau pressure at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
At each selected positive end-expiratory pressure (PEEP) level, plateau pressure will be directly recorded from the ventilator after performing an inspiratory hold maneuver.
This value is displayed by the ventilator in cmH₂O
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
Driving Pressure at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
At each selected positive end-expiratory pressure (PEEP) level, plateau pressure (Pplat, unit: cmH₂O) will be measured via the ventilator, and the corresponding PEEP value (unit: cmH₂O) will be recorded.
Driving pressure (ΔP) is calculated as the difference between the two: ΔP = Pplat - PEEP (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
End-inspiratory Transpulmonary Pressure (PTPi) at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor esophageal pressure (Pes) and airway pressure.
At each selected positive end-expiratory pressure (PEEP) level, an end-inspiratory hold maneuver will be performed.
The end-inspiratory transpulmonary pressure (PTPi) is calculated as the difference between the airway plateau pressure (Pplat) measured during the hold and the corresponding esophageal pressure (Pes): PTPi = Pplat - Pes (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
End-expiratory Transpulmonary Pressure (PTPe) at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor esophageal pressure (Pes) and airway pressure.
At each selected positive end-expiratory pressure (PEEP) level, an end-expiratory hold maneuver will be performed.
The end-inspiratory transpulmonary pressure (PTPe) is calculated as the difference between the PEEP measured during the hold and the corresponding esophageal pressure (Pes): PTPe = PEEP - Pes (unit: cmH₂O).
This calculated value is the single reported outcome measure
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
transpulmonary driving pressure at each selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
After placement of an esophageal pressure catheter, the ventilator will monitor transpulmonary pressures.
At each selected PEEP level, end-inspiratory transpulmonary pressure (PTPi) and end-expiratory transpulmonary pressure (PTPe) are obtained during inspiratory and expiratory hold maneuvers, respectively.
Both are measured in cmH₂O.
Transpulmonary driving pressure is calculated as the difference: ΔPtp = PTPi - PTPe (unit: cmH₂O).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
EIT-derived Regional Ventilation Parameters at each selected PEEP level
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT), the lung is divided into four regions of interest (ROI I to ROI IV) from ventral to dorsal.
For each ROI, the percentage of tidal impedance variation relative to total tidal impedance variation is recorded (% of total).
unit: cmH₂O
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
the center of ventilation (COV) at each selected PEEP level
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
the center of ventilation (COV) is calculated as the position of the ventilation center along the ventral-dorsal axis, expressed as a percentage (0% = ventral, 100% = dorsal).
this parameter is measured in %
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
CL HP% (overdistension region) at each selected PEEP level
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT),based on regional compliance analysis,CL HP% represent the percentage of lung regions showing a decrease in compliance at high PEEP due to overdistension (unit: %).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
|
CL LP% (collapse region) at selected PEEP
Aikaikkuna: baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Using electrical impedance tomography (EIT),based on regional compliance analysis,CL LP% represent the percentage of lung regions showing a decrease in compliance at low PEEP due to collapse (unit: %).
|
baseline, within 5 minutes after the PV-tool measurement, and within 5 minutes after each increment and decrement of PEEP during the PEEP adjustment process
|
Yhteistyökumppanit ja tutkijat
Sponsori
Sponsori
Opintojen ennätyspäivät
Opi tärkeimmät päivämäärät
Opiskelun aloitus (Todellinen)
Opiskelun aloitus
Ensisijainen valmistuminen (Todellinen)
Ensisijainen valmistuminen
Opintojen valmistuminen (Todellinen)
Opintojen valmistuminen
Opintoihin ilmoittautumispäivät
Ensimmäinen lähetetty
Ensimmäinen lähetetty
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen toimitettu, joka täytti QC-kriteerit
Ensimmäinen Lähetetty (Todellinen)
Ensimmäinen Lähetetty
Tutkimustietojen päivitykset
Viimeisin päivitys julkaistu (Todellinen)
Viimeisin päivitys julkaistu
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeisin lähetetty päivitys, joka täytti QC-kriteerit
Viimeksi vahvistettu
Viimeksi vahvistettu
Lisää tietoa
Tähän tutkimukseen liittyvät termit
Muut tutkimustunnusnumerot
Muut tutkimustunnusnumerot
- PEEP Titration
- 2024YFFK0329 (Muu apuraha/rahoitusnumero: Sichuan Science and Technology Program)
- 2024ZD0530000 (Muu apuraha/rahoitusnumero: Noncommunicable Chronic Diseases-National Science and Technology Major Project)
Yksittäisten osallistujien tietojen suunnitelma (IPD)
Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?
Lääke- ja laitetiedot, tutkimusasiakirjat
Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta
Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta
Yhdysvalloissa valmistettu ja sieltä viety tuote
Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .