Esta página foi traduzida automaticamente e a precisão da tradução não é garantida. Por favor, consulte o versão em inglês para um texto fonte.

Fissura e Expansão da Crista Óssea Guiada por Computador Usando um Martelo Eletromagnético

3 de novembro de 2026 atualizado por: Walid Elamrousy, Kafrelsheikh University

Estudo Comparativo entre Fenda da Crista Assistida por Inteligência Artificial/Guiada por Computador versus Fenda da Crista Convencional Utilizando Martelo Eletromagnético para Reconstrução de Defeitos Horizontais da Crista: Um Estudo Clínico Controlado Randomizado

The current trial aims to assess the efficacy of utilizing the electromagnetic mallet either by AI-assisted digital workflow or by the conventional freehand approach for reconstruction of horizontal ridge defects utilizing the ridge-split and expansion technique.

Visão geral do estudo

Status

Concluído

Condições

Intervenção / Tratamento

Descrição detalhada

Dental implants are a durable and long-term choice for tooth replacement to provide both functional and aesthetic benefits. However, successful implantation is critical, as it needs a sufficient amount of bone to maintain an ideal implant pathway and avoid vital structures. Vertical and horizontal ridge defects might occur after tooth extraction.

The pattern of alveolar ridge defect after extraction is classified according to the Cologne Classification into horizontal, vertical, combination, and sinus defects. mild (up to 4 mm), moderate (4-8 mm), and significant (over 8 mm) atrophy.

Successful implant placement is difficult to maintain with insufficient bone height and width. Many surgical techniques were introduced for the horizontally collapsed ridges, such as ridge augmentation, block graft, guided bone regeneration, and onlay graft. But these techniques need a long period of time for reconstruction, and an additional surgery is required for delayed implant placement.

Among these techniques, the ridge-splitting technique was performed for treating horizontally collapsed ridges by means of splitting the deficient ridge followed by ridge expansion to accommodate simultaneous implant placement.

The concept of the ridge-splitting technique is to make a self-space-making defect. The ridge-splitting technique was introduced by Tatum Jr. in 1986 and reintroduced in 1990 by Scipioni et al. In 1994, the technique was adapted by Summers, who utilized the viscoelastic properties of bone by applying pressure in-between buccal and lingual cortical bones using Summers osteotome to increase the width of the bone.

The ridge-splitting technique allowed the clinician to achieve desirable results within the shortest period and provide ridge expansion with simultaneous implant placement without the need for additional surgery and increase wound healing and satisfaction of the patient. Different instruments were used for splitting, such as chisels, discs, saws, osteomes, piezo surgery, and electromagnetic mallets.

The electromagnetic mallet consists of a handpiece that produces electromagnetic pulses with a rapid, non-impact motion that transmits to its tip, allowing high-intensity and precise movements with reduced trauma, minimal tissue damage, a greater safety margin, improved surgical outcomes, and faster recovery times. The precise movements make the repeatability of the procedure more applicable, which is very difficult to obtain with manual instruments.

Computer-guided surgery provides predictable and accurate treatment planning and implant positioning. It permits visualizing the jawbones and vital anatomical structures for preserving them during guided surgery. Artificial intelligence (AI) refers to the ability of machines to execute tasks that traditionally require human intelligence. Enhancing the high-quality dental treatment and precision of patient management, diagnosis, and treatment planning.

The current trial aims to assess the efficacy of utilizing the electromagnetic mallet either by AI-assisted digital workflow or by the conventional freehand approach for reconstruction of horizontal ridge defects utilizing the ridge-split and expansion technique.

Tipo de estudo

Intervencional

Inscrição (Real)

22

Estágio

  • Não aplicável

Contactos e Locais

Esta seção fornece os detalhes de contato para aqueles que conduzem o estudo e informações sobre onde este estudo está sendo realizado.

Locais de estudo

      • Kafr ash Shaykh, Egito
        • Faculty of Dentistry, Periodontology Department

Critérios de participação

Os pesquisadores procuram pessoas que se encaixem em uma determinada descrição, chamada de critérios de elegibilidade. Alguns exemplos desses critérios são a condição geral de saúde de uma pessoa ou tratamentos anteriores.

Critérios de elegibilidade

Idades elegíveis para estudo

18 anos a 40 anos (Adulto)

Aceita Voluntários Saudáveis

Sim

Gêneros Elegíveis para o Estudo

Tudo

Descrição

Inclusion Criteria:

  1. The target population with inadequate bone volume for implant placement due to width insufficiency of maxillary anterior alveolar ridges.
  2. Age ranges from 18 to 40 years of both sexes.
  3. Absence of any complicating systemic condition that may contraindicate surgical procedures and implant placement.
  4. Adequate oral hygiene.
  5. Eligible participants should present good general health and agree to random assignment to any of the two parallel study groups.
  6. Participants had a minimum 3-month post-extraction healing period and a horizontal defect in the maxillary esthetic zone with at least a bone width of 3 mm.

Exclusion Criteria:

  1. Vertical ridge defect.
  2. Undercut on the labial/buccal side.
  3. Thick cortical bone without cancellous bone inside.
  4. Uncontrolled systematic disorders as, diabetes mellitus, uncontrolled periodontal disease, history of head and neck radiotherapy, smokers, pregnancy, noncompliant patients, allergy to the used medications, uncooperative individuals or those unable to attend the study follow-up appointments.

Plano de estudo

Esta seção fornece detalhes do plano de estudo, incluindo como o estudo é projetado e o que o estudo está medindo.

Como o estudo é projetado?

Detalhes do projeto

  • Finalidade Principal: Tratamento
  • Alocação: Randomizado
  • Modelo Intervencional: Atribuição Paralela
  • Mascaramento: Solteiro

Armas e Intervenções

Grupo de Participantes / Braço
Intervenção / Tratamento
Experimental: Freehand spit

conventional ridge splitting with conventional simultaneous implant placement

Midcrestal incision will be followed by reflection of a full-thickness flap. A midcrestal cut without vertical osteotomy will be done using electromagnetic mallet unit, and then the cut will be extended deep to the implant length. The ridge will be expanded progressively using bone wedges. Dental implant fixtures will be placed stably with 1 mm minimal thickness of buccal bone plate. Surgical site will be completely closed, and wound edges will be sutured in a tension-free way.

Experimental: computer-guided split

computer-guided ridge splitting assisted by artificial intelligence with simultaneous computer-guided implant placement.

The patient specific guides will be placed and fixed by monocortical osteosynthesis screws at the pre-planned positions at the labial buccal mucosa.

A midcrestal cut will be performed on the crest of the alveolar ridge guided by the guide slits. The cuts will be expanded progressively using bone wedges through the guide slits to gradually lateralize and expand the labial alveolar plate of bone, so the labial cortex will move through the intentionally created micro gap till it touches the fitting aspect of the patient-specific guide. Implant drills will be inserted through the guiding holes in the surgical guide, and the implant osteotomy sites will be prepared. Finally, implants will be inserted in the osteotomy sites using a torque wrench in a self-tapping fashion, engaging palatal and basal bone for primary stability.

O que o estudo está medindo?

Medidas de resultados primários

Medida de resultado
Descrição da medida
Prazo
alveolar ridge width
Prazo: 24 months

CBCT will have taken immediately after surgery and at 6, 12 and 24months postoperatively

24 months

Medidas de resultados secundários

Medida de resultado
Descrição da medida
Prazo
vertical bone height
Prazo: 24months

CBCT will be taken immediately after surgery and at 6, 12 and 24months postoperatively to evaluate vertical bone height.

24months

Colaboradores e Investigadores

É aqui que você encontrará pessoas e organizações envolvidas com este estudo.

Patrocinador

Investigadores

  • Cadeira de estudo: walid elamrousy, Kafrelsheikh University

Publicações e links úteis

A pessoa responsável por inserir informações sobre o estudo fornece voluntariamente essas publicações. Estes podem ser sobre qualquer coisa relacionada ao estudo.

Datas de registro do estudo

Essas datas acompanham o progresso do registro do estudo e os envios de resumo dos resultados para ClinicalTrials.gov. Os registros do estudo e os resultados relatados são revisados ​​pela National Library of Medicine (NLM) para garantir que atendam aos padrões específicos de controle de qualidade antes de serem publicados no site público.

Datas Principais do Estudo

Início do estudo (Real)

27 de agosto de 2024

Conclusão Primária (Real)

27 de outubro de 2026

Conclusão do estudo (Real)

2 de novembro de 2026

Datas de inscrição no estudo

Enviado pela primeira vez

20 de novembro de 2025

Enviado pela primeira vez que atendeu aos critérios de CQ

20 de novembro de 2025

Primeira postagem (Real)

1 de dezembro de 2025

Atualizações de registro de estudo

Última Atualização Postada (Real)

4 de novembro de 2026

Última atualização enviada que atendeu aos critérios de controle de qualidade

3 de novembro de 2026

Última verificação

1 de novembro de 2026

Mais Informações

Termos relacionados a este estudo

Outros números de identificação do estudo

  • KFSIRB200-338

Plano para dados de participantes individuais (IPD)

Planeja compartilhar dados de participantes individuais (IPD)?

NÃO

Informações sobre medicamentos e dispositivos, documentos de estudo

Estuda um medicamento regulamentado pela FDA dos EUA

Não

Estuda um produto de dispositivo regulamentado pela FDA dos EUA

Não

Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .