Measurement Algorithm Control and Optimization With Subsequent Performance Evaluation of Sanmina Non-invasive Biosensors During a Standardized Meal Test in Patients With Diabetes Mellitus Type 1 and Type 2
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Detailed Description
- This study is a combined, open label, prospective, comparative single-center study.
- The study is separated in 3 consecutive study parts. The first 2 study parts include 12 patients each. In the third study part 36 patients will be enrolled. Study part 1 and 2 will be used for optimization and control of the measurement algorithms of the Sanmina biosensors. During the third study part with enrolment of 36 patients, the precision and accuracy of the final Sanmina biosensor algorithm will be demonstrated. The study conduct for all 60 participants of all 3 study parts will be exactly the same. In all groups of participants, the Sanmina finger clip and wearable non-invasive monitoring biosensor will be individually introduced and assigned. During the study visit at the study site, a standardized meal will be given to the participants. At eleven time points before and after the standardized meal, glucose, heart rate, and pO2 will be measured using the Sanmina finger clip and wearable non-invasive monitoring biosensor. The measurement time points are -30, 0, 15, 30, 45, 60, 75, 90, 120, 150 and 180 min. The measurements will be compared to capillary blood glucose measurements by YSI Stat 2300 and StatStrip (glucose), and parallel measurements of the heart rate and the pO2 using a patient monitor. Further the exact skin colour will be evaluated using a skin colour card.
Study Type
Study Type
Enrollment (Actual)
Enrollment
Phase
Phase
- Not Applicable
Contacts and Locations
Study Locations
-
-
Rhineland-Palatinate
-
Mainz, Rhineland-Palatinate, Germany, 55128
- Pfuetzner Science & Health Institute GmbH
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
Accepts Healthy Volunteers
Genders Eligible for Study
Description
Inclusion Criteria:
- Type 1 or Type 2 diabetic subjects or healthy probands
- Subjects who are able to complete informed consent form (by him/herself or by his/her guardian);
- 18 years old and above;
- Anatomically suitable finger in discretion of the investigator
Exclusion Criteria:
- Does not meet inclusion criteria;
- Any conditions that may hamper good visual contact between the finger or wrist and sensor, such as raised birthmarks, scars, tattoos;
- Pregnancy;
- Nursing mothers;
- Any skin scratch(es), damage, over dry, long nails on the measured finger;
- Unsuitable finger with the device might be excluded if recognized during the trial;
- Medication containing nitrates
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Other
- Allocation: Non-Randomized
- Interventional Model: Sequential Assignment
- Masking: None (Open Label)
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Experimental: Optimization and control 1
The first study part/arm includes 12 patients and will be used for optimization and control of the measurement algorithms of the Sanmina biosensors.
|
non-invasive blood glucose measurement using the Sanmina Biosensor referenced with the invasive reference blood glucose device YSI 2400 Plus.
|
|
Experimental: Optimization and control 2
The second study part/arm includes 12 patients and will be used for optimization and control of the measurement algorithms of the Sanmina biosensors.
|
non-invasive blood glucose measurement using the Sanmina Biosensor referenced with the invasive reference blood glucose device YSI 2400 Plus.
|
|
Other: Precision and accuracy
During the third study part with enrolment of 36 patients, the precision and accuracy of the final Sanmina biosensor algorithm will be demonstrated.
|
non-invasive blood glucose measurement using the Sanmina Biosensor referenced with the invasive reference blood glucose device YSI 2400 Plus.
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Performance and accuracy of glucose levels
Time Frame: approx. 240 minutes
|
performance and accuracy of the Sanmina biosensors (wearable and finger clip) in monitoring glucose levels (mg/dL) during a standardized meal experiment.
Measurements (during the meal experiment) of the Sanmina biosensor will be compared to the capillary blood glucose reference method YSI STAT 2300 (glucose, in mg/dL).
|
approx. 240 minutes
|
|
Performance and accuracy of pO2
Time Frame: approx. 240 minutes
|
performance and accuracy of the Sanmina biosensors (wearable and finger clip) in monitoring pO2 (%) during a standardized meal experiment.
PO2-measurements (during the meal experiment) of the Sanmina biosensor will be compared to the patient monitor (%).
|
approx. 240 minutes
|
|
Performance and accuracy of heart rate
Time Frame: approx. 240 minutes
|
performance and accuracy of the Sanmina biosensors (wearable and finger clip) in monitoring heart rate (pulse/min) during a standardized meal experiment.
Heart rate measurements (during the meal experiment) of the Sanmina biosensor will be compared to the patient monitor heart rate(pulse/min).
|
approx. 240 minutes
|
Collaborators and Investigators
Sponsor
Sponsor
Collaborators
Collaborators
Study record dates
Study Major Dates
Study Start (Actual)
Study Start
Primary Completion (Actual)
Primary Completion
Study Completion (Actual)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Actual)
First Posted
Study Record Updates
Last Update Posted (Actual)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
Other Study ID Numbers
- SNM-NGM-001
Plan for Individual participant data (IPD)
Plan to Share Individual Participant Data (IPD)?
Drug and device information, study documents
Studies a U.S. FDA-regulated drug product
Studies a U.S. FDA-regulated device product
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.