Comparison Between Conventional and CAD/CAM Complete Dentures Designed Based on Neutral Zone Concept

September 2, 2024 updated by: Omnia M. Refai, Ain Shams University

Comparison of Electromyographic Muscle Activity and Occlusal Accuracy Between Conventional and CAD/CAM Complete Dentures Designed Based on Neutral Zone Concept (Randomized Controlled Clinical Trial)

A within-subject cross-over study is done on eight completely edentulous patients to compare two different complete removable dentures. Group I: Heat cured Conventional complete dentures designed based on the neutral zone concept; Group II: CAD-CAM neutral zone complete dentures designed based on the neutral zone concept. Occlusal analysis is done by the T-Scan device, and evaluation of muscle activity is conducted by electromyography at insertion time, two weeks after insertion time, and one month after insertion time.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

This study is designed as a randomized clinical trial applying a within-subject comparison of two different complete denture types as follows; group I: Heat cured Conventional complete dentures designed based on the neutral zone concept, group II: CAD-CAM neutral zone complete dentures designed based on the neutral zone concept. The study will be carried out on eight completely edentulous patients, each patient will receive two sets of complete dentures in a random sequence. For each denture set, at the denture insertion visit occlusal analysis and equilibration will be performed with the aid of the T-Scan device, also EMG evaluation of muscle activity will be conducted. Two weeks after, the patients will be recalled to reanalyze the occlusion after the denture settles using the T-scan computerized system. One month after the last recall visit, the EMG evaluation of muscle activity will be conducted again. The EMG and T-scan recording data will be collected and analyzed to compare the two denture types

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
8

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

Study Locations

  • Egypt
      • Cairo, Egypt, 11566
        • Faculty of Dentistry, Ain Shams University

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  1. Patients who have been completely edentulous in both jaws (maxilla and mandible) for a long period.
  2. Patients with a resorbed mandibular ridge.
  3. Patients with a Class I maxillo-mandibular relationship
  4. Patients with adequate inter-arch space.
  5. Patients with good neuromuscular control.
  6. Patients without any tempo-mandibular disorder.

Exclusion Criteria:

  1. Patients with any oral diseases that may affect complete denture construction
  2. Patients with bad oral hygiene.
  3. Patients with neuromuscular disorders.
  4. Patients with a history of parafunctional habits.
  5. Hysterical patients.
  6. Patients will undergo or have previously received chemotherapy or radiotherapy.
  7. Drug-addicted patients.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Triple

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Active Comparator: CAD/CAM Milled Methacrylate Complete Removable Dentures based on neutral zone concept.
The patient will be provided with a complete removable denture designed according to the neutral-concept to restore his missing teeth, which will be manufactured by CAD/CAM milling of monolithic methacrylate blanks.
Device: CAD/CAM Milled Methacrylate Complete Removable Dentures based on neutral zone concept.
The patients will receive complete removable dentures designed based on the neutral-zone concept and digitally manufactured using a milling machineز
Experimental: Heat Cured Conventional Complete Removable Dentures based on neutral zone concept
The patient will be provided by a complete removable denture designed based on the neutral zone concept to restore his missing teeth which will be manufactured by heat curing of Polymethyl methacrylate.
Device: Heat Cured Conventional Polymethylmethacrylate Complete Removable Dentures based on neutral zone concept
The patients will receive complete removable dentures designed based on neutral zone concept and manufactured by heat cured conventional technique of polymethylmethacrylate

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Evaluation of the electromyography muscle activity (EMG) of the masseter and temporalis muscles.
Time Frame: one month
The electromyography activity of the Masseter and Temporalis muscles will be evaluated during clenching, chewing of soft food, and chewing of hard food, at the time of denture insertion (baseline) and one month after baseline.The measuring unit is mv.
one month

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Evaluation of occlusal force equilibration using t-scan device
Time Frame: two weeks
The percentage of occlusal force distribution will be evaluated for both dentures using the T-Scan computerized occlusal analysis system, at the time of denture insertion (baseline) and following baseline by two weeks after.
two weeks

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Ain Shams University

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: Omnia MS Refai, PHD, Faculty Of Dentistry Ain Shams University
  • Principal Investigator: Omar A El-Sadat, PHD, Faculty Of Dentistry Ain Shams University
  • Principal Investigator: Sara IS Mohamed, PHD, Faculty of Dentistry , Ain Shams Univeristy

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
June 1, 2023

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
May 1, 2024

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
June 1, 2024

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
July 22, 2023

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
August 11, 2023

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
August 14, 2023

Study Record Updates

Last Update Posted (Estimated)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
September 5, 2024

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
September 2, 2024

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
September 1, 2024

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • FDASU-ReclR012317

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings