3D Printed Custom Applicators for HDR BT (DISCO)

February 4, 2026 updated by: Royal North Shore Hospital

Study of 3D-printed Custom Applicators for Intracavitary HDR Gynaecological Brachytherapy (DISCO)

Intracavitary brachytherapy for gynaecological cancer currently use cylinder-type applicators or custom wax moulds to place a radioactive source in close proximity to the treatment area and provide highly conformal dose distributions. This study is a Phase IIa non-randomised interventional pilot trial that will investigate the feasibility of successfully treating patients with 3D-printed custom applicators.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Recruiting

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Intracavitary brachytherapy for gynaecological cancer currently use cylinder-type applicators or custom wax moulds to place a radioactive source in close proximity to the treatment area and provide highly conformal dose distributions. Current workflows for designing and constructing custom applicators with wax moulds are complex, time consuming and can result in a device that fails to meet original design specifications dictated by the planning system. In contrast, 3D-printed custom applicators provide the ability to design and print patient-specific devices that match optimal design specifications. The workflow for 3D-printed applicators is also more efficient with lower turn-around time and labour/equipment costs, and ensures a more robust product for treatment. Despite these advantages there is currently no radiotherapy department offering 3D printed custom applicators at present. This study will investigate the feasibility of successfully treating gynaecological cancers with 3D-printed custom applicators.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Estimated)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
10

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Contact

Study Contact

The name and contact information for the person who can answer enrollment questions for a clinical study. Each location where the study is being conducted may also have a specific contact, who may be better able to answer those questions.

Study Contact Backup

Study Locations

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

  • Adult
  • Older Adult

Accepts Healthy Volunteers

No

Description

Inclusion Criteria:

  • Able to give informed consent
  • Patients indicated for intracavitary brachytherapy
  • FIGO stage I-IVA
  • ECOG 0-2
  • Primary endometrial cancer, primary vaginal cancer, primary vulva cancer, recurrent gynaecological cancer

Exclusion Criteria:

  • Pregnancy
  • Patients contraindicated for brachytherapy
  • Inflammatory bowel disease/history of adhesions/bowel obstruction
  • Renal transplant/horseshoe kidney
  • Patients with significant LVSI or pelvic sidewall invasion
  • Patients requiring interstitial brachytherapy implants

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: N/A
  • Interventional Model: Single Group Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
Experimental: Gynaecological HDR brachytherapy patients
Using 3D-printed custom applicators to treat gynaecological HDR brachytherapy patients
Device: 3D-printed custom applicator
3D-printed custom applicator

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Successful treatment of gynaecological HDR brachytherapy patients with 3D printed intracavitary applicators.
Time Frame: 5 years
To demonstrate the feasibility of successfully simulating, planning and treating a HDR BT gynaecological patient with a 3D-printed internal mould, such that there is a dosimetric and/or clinical benefit for the patient relative to the current standard of care (cylindrical vaginal applicator). Successful treatment indicated by achieving no adverse events or difference to standard of care, and dosimentic comparisons of the 3D printed applicator plan to the cylinder plan are equivalent or better. Feasibility also determined by achieving no logistical or design issues in using the 3D printed applicators clinically.
5 years

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
To assess the patients radiation therapy acute and late toxicities using the CTCAE criteria
Time Frame: 5 years
RT acute and late side effects will be assessed and quantified using CTCAE criteria via clinician assessment and PROs
5 years
To compare quality of treatment plans generated for 3D-printed moulds and cylindrical applicators assessed by dosimetric indices, statistical analysis (p-value) and comparison with international guidelines.
Time Frame: 5 years
The plan quality of treatment plans generated for 3D-printed moulds and cylindrical applicators will be compared using dosimetric indices including target coverage (D90, Dose Homogeneity index) and organs at risk doses (D2cc, D1cc and point max) as well as patient comfort. statistical analysis (p-value) and comparison with international guidelines will be used to assess the quality of the treatment plans.
5 years
Determine feasibility of a pre-planned MR-only procedure
Time Frame: 5 years
Feasibility of a pre-planned MR-only procedure will be determined using any of the patients that are accrued to the study who have both a CT and MRI performed at the time of simulation. The applicator and treatment plan will be generated based on the MRI and both compared to the CT-based plan and applicator. Feasibility will be indicated by generating equivalent plan quality and applicators from both methods.
5 years
To determine the feasibility of an initial CT-only process by comparing initial and final CT plan dosimetry assessed by dosimetric indices, clinical tolerances, and statistical analysis (p-value).
Time Frame: 5 years
The initial and final CT plan dosimetry will be compared to determine the feasibility of an initial CT-only process. Clinically insignificant differences between the plan dosimetry metrics and all within clinical tolerances will be used to quantify the difference. statistical analysis (p-value) will be used to assess the quality of the treatment plans.
5 years
Determine feasibility of optimising 3D-printed applicator design based on the cylinder fitting procedure
Time Frame: 5 years
The feasibility of an optimised 3D-printed applicator design based on the cylinder fitting procedure will be assessed by comparison of the 3D-printed clinical applicators with applicators derived from CT/MR of the vault in a relaxed state with an expansion applied based on the size of the cylinder applied in the fitting procedure. Feasibility will be determined by looking for a correlation between the size of the 3D printed clinical applicators and the size of the cylinders tolerated by the patient in the fitting procedure.
5 years
To measure resources such as procedure times and demonstrate acceptable timescales for the process
Time Frame: 5 years
Procedure times will be recorded as per ARIA carepath tasks and time taken within the 3D-printed custom applicator workflow compared to the standard of care cylinder applicator workflow with equivalent or less time taken deemed acceptable
5 years
To define the resource costs associated with the 3D-printed design process and perform a cost comparison with the standard of care process
Time Frame: 5 years
Costs associated with the 3D-printed design process will be defined and compared with the standard of care process via economic analysis of the resourcing and unit-price estimates in each arm of the respective workflows
5 years
To assess patient experience and acceptability of the process with questionnaires
Time Frame: 5 years
Patient experience and acceptability of the 3D-printed simulation and treatment processes will be assessed with the EORTC QLQ-C30 questionnaires and success measured by comparison with the standard of care vaginal cylinder process. Questionnaires include questions with a scale of 1-4 where a higher number indicates a worse experience and a scale of 1-7 where a lower number indicates a worse experience.
5 years

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Royal North Shore Hospital

Collaborators

Collaborators

An organization other than the sponsor that provides support for a clinical study. This support may include activities related to funding, design, implementation, data analysis, or reporting.
Northern Sydney and Central Coast Area Health Service

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: Marita Morgia, MD, Royal North Shore Hospital
  • Study Director: Jeremy Booth, PhD QMP, Royal North Shore Hospital

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
November 24, 2023

Primary Completion (Estimated)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
September 1, 2028

Study Completion (Estimated)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
September 1, 2028

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
January 11, 2024

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
May 21, 2024

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
May 29, 2024

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
February 6, 2026

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
February 4, 2026

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
February 1, 2026

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • DISCO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings