CMC (Carpometacarpal) OA (Osteoarthritis) Thumb Splint Study

Comparison of Two Carpometacarpal Stabilizing Splints for People With Thumb Osteoarthritis

Osteoarthritis (OA) of the thumb carpometacarpal (CMC) joint is a common condition that is seen regularly in outpatient occupational therapy and physiotherapy departments. Prevalence rates of symptomatic thumb OA have been found to be as high as 25%. The conservative treatment of choice consists of splinting. There are many different types of thumb splints available, but no specific guidelines as to which is preferred. There is limited evidence to support the benefits of splinting.

The purpose of this study is to compare the effectiveness of two different thumb splints: the Comfort Cool, a prefabricated neoprene splint and a custom made neoprene and thermoplastic thumb splint. These are two of the most commonly prescribed splints in local occupational therapy departments.

Study Overview

• Status: Completed
• Conditions: Osteoarthritis
• Intervention / Treatment: Device: Comfort Cool thumb splint by North Coast Medical; Device: Custom made thermoplastic & neoprene splint

Detailed Description

Thumb (CMC) osteoarthritis is treated conservatively with splinting. The objectives of splinting the CMC joint include stabilizing the joint, reducing pain symptoms as well as enhancing performance of everyday activities. There is limited evidence to support the effectiveness of splinting in reducing pain and very little evidence to support the effectiveness of thumb splints to enhance function.

This CMC splint comparison study is a cross-over community based study of the effect of two different types of CMC stabilizing splints on patients with thumb OA. The objectives include measuring clients' OA symptoms and function using the Australian Canadian Osteoarthritis Hand Index (AUSCAN-HI 3.1), grip strength, pinch strength and client's personal splint preference on 4 separate occasions in order to compare the two thumb splints. The two splints differ in material and design. One splint is softer and incorporates more of the hand. The evidence gathered will support the effectiveness of specific splint design. It will also provide best practice guidelines for splint selection in clients with CMC OA.

We are using a one group own control cross-over design where outcome measures will be taken at week 1, week 4, week 5 and week 9. Each client will wear both splints for a 4 week period separated by a 1 week wash out period.

Procedure:

First appointment: At the initial visit the client will be randomly assigned to splint order. The client will complete the AUSCAN-HI 3.1, and a grip and pinch strength measurement. The first CMC stabilizing splint will be fabricated and fitted as per normal splinting treatment for clients with CMC OA. The client will be instructed how to wear and care for their splint. General instructions will include wearing the splint for symptomatic use as well as heavy activities.

Second visit: The second visit will take place 4 weeks after the first unless the client needs to come in earlier for a splint adjustment. At this time the AUSCAN-HI 3.1 will be administered again. Grip and pinch strength will also be re-measured.

Third visit: After a one week wash-out period where the client does not wear any splint, they will attend the OT Outpatient department and complete the AUSCAN-HI 3.1, perform a grip and pinch strength measurement. They will be provided with the second CMC stabilizing splint and instructed in a wearing regime and the care of it.

Fourth visit: This will take place at approximately 9 weeks, 4 weeks after wearing the second splint. The AUSCAN-HI 3.1 will be completed for the last time as well as a grip and pinch strength measurement. The client will also be asked their personal splint preference at this time.

Data will be collected and input into the computer.

Note: The procedures for grip and pinch strength measurement will follow the guidelines set out in the ASHT Clinical Assessment Recommendations.

Data Analysis: Data will be analyzed using ANOVA, to determine if there is a significant difference between the 2 splints for OA pain, function, grip strength and personal preference.

• Study Type: Interventional
• Enrollment (Actual): 56
• Phase: Phase 2

Contacts and Locations

Study Locations

• Canada
  • British Columbia
    • Campbell River, British Columbia, Canada, V9W 3V1
      • Campbell River Hospital
    • Nanaimo, British Columbia, Canada, V9S 2B7
      • Nanaimo Regional General Hospital
    • Victoria, British Columbia, Canada, V8R 4R2
      • Victoria Island Hand Clinic

Participation Criteria

Eligibility Criteria

• Ages Eligible for Study: 45 years and older (ADULT, OLDER_ADULT)
• Accepts Healthy Volunteers: No
• Genders Eligible for Study: All

Description

Inclusion Criteria:

• physician diagnosis of CMC OA
• 45 years or older
• able to read and write in English

Exclusion Criteria:

• previous thumb surgery

Study Plan

How is the study designed?

Design Details

• Primary Purpose: TREATMENT
• Allocation: RANDOMIZED
• Interventional Model: CROSSOVER
• Masking: NONE

Number of Arms

2

Arms and Interventions

Participant Group / Arm	Intervention / Treatment
ACTIVE_COMPARATOR: Comfort Cool Splint; Comfort Cool(TM) splint, a prefabricated neoprene splint, fit according to the participant's size (S, M, M+, L). Participants instructed to wear the splint when symptomatic, during manual tasks, and at night if desired. Used for 4 weeks.	Device: Comfort Cool thumb splint by North Coast Medical; Comfort Cool(TM) splint, a prefabricated neoprene splint, fit according to the participant's size (S, M, M+, L). Participants instructed to wear the splint when symptomatic, during manual tasks, and at night if desired. Used for 4 weeks. Treating therapists did not provide exercises or joint protection education until the final outcome measurement session at 9 weeks.
ACTIVE_COMPARATOR: Hybrid Custom-made splint; The Hybrid splint was based on Pat McKee's custom-made splint design, fabricated from neoprene and 1.6 mm Rolyan Aquaplast Watercolors (Bollingbrook, IL). Participants were instructed to wear the splint when symptomatic, during manual tasks, and at night if desired. Splint was worn for 4 weeks.	Device: Custom made thermoplastic & neoprene splint; The Hybrid splint was based on Pat McKee's custom-made splint design, fabricated from neoprene and 1.6 mm Rolyan Aquaplast Watercolors (Bollingbrook, IL). Participants were instructed to wear the splint when symptomatic, during manual tasks, and at night if desired. Splint was worn for 4 weeks. Treating therapists did not provide exercises or joint protection education until the final outcome measurement session at 9 weeks.

What is the study measuring?

Primary Outcome Measures

Outcome Measure	Measure Description	Time Frame
Hand Function	Hand Function was measured with the Australian Canadian Osteoarthritis Hand Index 3.1 (AUSCAN). The AUSCAN is a self-report tool with 15 questions in 3 subscales: pain, function, joint stiffness, and uses an 11-point (0-10) numerical rating scale. The AUSCAN function subscale has 9 items regarding level of difficulty in performing daily tasks such as opening a jar, turning a doorknob, wringing out a washcloth. Possible scores range from 0 to 90. Mean change scores are reported (baseline compared to 4 weeks splint use). Higher scores indicate worse function.	4 weeks

Secondary Outcome Measures

Outcome Measure	Measure Description	Time Frame
Pain	AUSCAN 3.1 pain subscale. Possible score range is 0 to 50. Lower scores indicate less pain. Change scores are reported (baseline to 4 weeks splint wear) for each of the two splints.	4 weeks

Collaborators and Investigators

• Sponsor: University of British Columbia
• Collaborators: Vancouver Foundation
• Investigators: Principal Investigator: Catherine Backman, Ph.D, University of British Columbia; Study Director: Peter Kirk, Ph.D, University of British Columbia

Publications and helpful links

General Publications

• Sillem H, Backman CL, Miller WC, Li LC. Comparison of two carpometacarpal stabilizing splints for individuals with thumb osteoarthritis. J Hand Ther. 2011 Jul-Sep;24(3):216-25; quiz 126; discussion 227-30. doi: 10.1016/j.jht.2010.12.004. Epub 2011 Mar 21.

Study record dates

Study Major Dates

• Study Start: April 1, 2008
• Primary Completion (ACTUAL): June 1, 2009
• Study Completion (ACTUAL): June 1, 2009

Study Registration Dates

• First Submitted: June 23, 2008
• First Submitted That Met QC Criteria: June 24, 2008
• First Posted (ESTIMATE): June 25, 2008

Study Record Updates

• Last Update Posted (ESTIMATE): December 11, 2014
• Last Update Submitted That Met QC Criteria: December 9, 2014
• Last Verified: December 1, 2014

More Information

Terms related to this study

• Keywords: Osteoarthritis, carpometacarpal joint; Thumb splints; AUSCAN-HI 3.1; Grip and pinch strength
• Additional Relevant MeSH Terms: Joint Diseases; Musculoskeletal Diseases; Rheumatic Diseases; Arthritis; Osteoarthritis
• Other Study ID Numbers: H07-03133