Establishing Normative Values for Thermal Detection and Pain Threshold Established by the Psi Method

September 30, 2021 updated by: Université Catholique de Louvain
The study aims to compare different methods to assess thermal detection ability in diabetic patients, as a way to monitor and diagnose neurological complications of diabetes mellitus.

Study Overview

Detailed Description

Diabetic polyneuropathy is a frequent complication of diabetes mellitus. The impairment of peripheral nerve fibre function can be very variable, predominantly affecting large-diameter fibres (subserving touch), small-diameter fibres (subserving thermonociception), or both.

Thermal detection threshold evaluation can be used to quantify the extent of function loss (hypoesthesia) and, to a lesser extent, gain (hyperesthesia) in patients with thermonociceptive impairments. They are important features of quantitative sensory testing (QST) protocols (Rolke, Baron, et al., 2006; Rolke, Magerl, et al., 2006) and are pivotal to the determination of sensory phenotypes (Baron et al., 2017; Raputova et al., 2017). Their role is particularly important in the diagnostic workup of neuropathies affecting small fibers (i.e., the subgroup of primary afferents responsible for thermonociception and autonomic functions) such as painful diabetic neuropathies (Terkelsen et al., 2017; Tesfaye et al., 2010).

Currently, clinical measurements of thermal detection thresholds are mainly performed using the method of limits (Fruhstorfer, Lindblom, & Schmidt, 1976), in which a continuous heating or cooling ramp (usually at a slow rate, 1°C/s in the case of the DFNS QST protocol (Rolke, Magerl, et al., 2006)) is applied to the skin of the patient who is instructed to press a button as soon as he/she feels a warm or cold sensation. The detection threshold is then considered to be the temperature reached at the moment the patient pressed the button. The method of limits has been known for a long time to be methodologically biased due to its reliance on the reaction time (Yarnitsky & Ochoa, 1991), which lead to an overestimation of the threshold value corresponding to the temperature change that occurred between detection and it's signalling by a motor response. This is problematic as reaction times are under the influence of decision and motor reaction response speeds which may be affected by factors irrelevant to the assessment of sensory discrimination, such as cognitive or motor impairments.

A methodologically sounder approach for threshold measurement is the method of levels or constant stimuli (Kingdom & Prins, 2010). A number of preselected stimulus intensities are presented a number of times in random order and the subject is asked whether he/she felt each stimulus. Unlike the method of limits, this approach is not biased by decision speed and motor function. Furthermore, this method enables the fitting of a psychometric function (probability of detection as a function of stimulus intensity) to the results, therefore moving thermal detection performance assessments from the outdated High Threshold Theory framework to that of the currently leading Signal Detection Theory (Kingdom & Prins, 2010). Whereas High Threshold Theory conceptualized detection as an ON/OFF process (below threshold, no detection occurs, above threshold detection always occurs), Signal Detection Theory sees detection as a probabilistic process (each stimulus intensity is associated with a probability of detection). This theoretical framework implies to redefine the threshold as the stimulus intensity for which detection probability equates 0.5. In addition to the threshold, the psychometric function is also defined by its slope, i.e. the rate at which detection probability changes around the value of the threshold. . Unfortunately, the method of levels has some important drawbacks. First, it is time consuming as it requires collecting responses to a large amount of stimuli (usually several hundreds) (Gescheider, 1997). Second, the range of stimulus intensities must be approximately centered on the actual threshold value and cover the transition range of detection probability.

To overcome these limitations, several adaptive procedures have been proposed. These procedures actively adjust the intensity of the presented stimuli depending on the previous responses of the subject (Kingdom & Prins, 2010). In the present study, we implemented for the first time the Psi method (a Bayesian adaptive algorithm proposed by Kontsevich and Tyler (1999)) to estimate the thresholds and slopes of the psychometric function for heat and cold detection. This algorithm associates each potential values of slope and threshold with a probability, updates this probability distribution based on the response recorded after each stimulus presentation (detected/not detected), and selects the next stimulus intensity so that the response to its presentation maximizes the entropy (i.e. the uncertainty around the values of slope and threshold) reduction.

In this study, we will test healthy controls with the conventional method of limit and the new psi method, in order to establish normative values for the new test.

Study Type

Interventional

Enrollment (Anticipated)

80

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

      • Brussels, Belgium, 1200
        • Institute of Neuroscience

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

36 years to 75 years (Adult, Older Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

-

Exclusion Criteria:

  • Alcohol beverage intake >3 units/day
  • Habitual substance abuse
  • History of chemotherapy
  • Scar or dermatological condition at the site of stimulation (forearm and hands, leg and foot)
  • History of neurological, psychiatric or metabolic disorder other than Diabetes Mellitus (screening will be performed with the patient)
  • Currently taking drugs that could induce neuropathy (screening will be performed with the patient)
  • For healthy controls: Suffering of chronic pain

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Diagnostic
  • Allocation: N/A
  • Interventional Model: Single Group Assignment
  • Masking: None (Open Label)

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Main study
Several electrophysiological and behavioural tests will be performed to properly diagnose the patients/check that the healthy controls do not suffer of neuropathy.
The testing will be carried out using the classical method of limits, i.e. a continuous heating/cooling stimulus will be applied to the skin at a rate of 1°C/s, until the subject signals that he/she felt the targeted sensation by pressing a button (Rolke, Baron, et al., 2006). The temperature reached by the time the subject pressed the button will be considered the threshold. Baseline temperature will be set at 32°C. The stimuli will not go lower than 0°C and higher than 50°C.
The Psi algorithm is a method using Bayesian statistics to determine not only the threshold but also the slope of the psychometric function (relationship between the intensity of a stimulus and its detection probability; Kingdom & Prins, 2010). The algorithm selects the next stimulus intensity to be the most informative on the parameters of interest, based on the prior probability density. After each stimulation, the subject will be asked if he/she felt it (as painful) or not. Based on that answer, a posterior probability density is computed. This posterior is then used as prior for the next stimulation. The stimuli will last maximum 1 s and temperature will be kept between 0°C and 60°C.
A standardized neurological examination will be performed to assess all the items included in the Utah Early Neuropathy Scale (UENS ) (Singleton et al., 2008) and the Toronto Clinical Neuropathy Score (TCNS)(Perkins, Olaleye, Zinman, & Bril, 2001). This will include: questions about symptoms (presence or absence of foot pain, numbness, tingling, weakness, imbalance and upper limb symptoms); evaluation of knees and ankles deep tendon reflexes; evaluation of pinprick, temperature, light touch, vibration (128 Hz tuning fork) compared to that of an unaffected sites (e.g., sternum); position sensation in the big toes; mapping of pinprick sensitivity in the lower leg; and evaluation of the active extension of the big toes. Pinprick evaluation will be performed using a disposable pin designed for that purpose (Medipin, The United-Kingdom).

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Fitted psychometric functions for cold detection obtained with the psi method
Time Frame: baseline
The alpha (threshold; °C) and beta (slope, °C^-1) terms of the fitted logistic equation
baseline
Fitted psychometric functions for warm detection obtained with the psi method
Time Frame: baseline
The alpha (threshold; °C) and beta (slope, °C^-1) terms of the fitted logistic equation
baseline
Fitted psychometric functions for cold pain obtained with the psi method
Time Frame: baseline
The alpha (threshold; °C) and beta (slope, °C^-1) terms of the fitted logistic equation
baseline
Fitted psychometric functions for heat pain obtained with the psi method
Time Frame: baseline
The alpha (threshold; °C) and beta (slope, °C^-1) terms of the fitted logistic equation
baseline
Cold detection threshold (protocol of the German Research Network on Neuropathic Pain - DFNS)
Time Frame: baseline
average of 3 measurement of the threshold with the method of limits, as described in the protocol of the German Research Network on Neuropathic Pain - DFNS
baseline
Cold pain threshold (protocol of the German Research Network on Neuropathic Pain - DFNS)
Time Frame: baseline
average of 3 measurement of the threshold with the method of limits, as described in the protocol of the German Research Network on Neuropathic Pain - DFNS
baseline
Warm detection threshold (protocol of the German Research Network on Neuropathic Pain - DFNS)
Time Frame: baseline
average of 3 measurement of the threshold with the method of limits, as described in the protocol of the German Research Network on Neuropathic Pain - DFNS
baseline
Heat Pain threshold (protocol of the German Research Network on Neuropathic Pain - DFNS)
Time Frame: baseline
average of 3 measurement of the threshold with the method of limits, as described in the protocol of the German Research Network on Neuropathic Pain - DFNS
baseline

Other Outcome Measures

Outcome Measure
Measure Description
Time Frame
Utah Early Neuropathy Scale
Time Frame: baseline
The UENS is a score derived from standard neurological examination items (evaluation of ankles deep tendon reflexes; evaluation of vibration sensation (128 Hz tuning fork); evaluation of allodynia; evaluation of position sensation in the big toes; mapping of pinprick sensitivity in the lower leg; and evaluation of the active extension of the big toes), ranging from 0 to 42.
baseline
Toronto clinical neuropathy score
Time Frame: baseline
The UENS is a score derived from standard neurological examination items (questions about symptoms (presence or absence of foot pain, numbness, tingling, weakness, imbalance and upper limb symptoms); evaluation of knees and ankles deep tendon reflexes; evaluation of pinprick, temperature, light touch, vibration (128 Hz tuning fork) compared to that of an unaffected sites (e.g., sternum); position sensation in the big toes), ranging from 0 to 19.
baseline

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Investigators

  • Principal Investigator: André Mouraux, MD, PhD, Université Catholique de Louvain

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

October 10, 2020

Primary Completion (Anticipated)

July 1, 2022

Study Completion (Anticipated)

January 1, 2023

Study Registration Dates

First Submitted

July 23, 2020

First Submitted That Met QC Criteria

October 26, 2020

First Posted (Actual)

November 2, 2020

Study Record Updates

Last Update Posted (Actual)

October 8, 2021

Last Update Submitted That Met QC Criteria

September 30, 2021

Last Verified

September 1, 2021

More Information

Terms related to this study

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Yes

IPD Plan Description

SAP will be available on the OSF repository by January 2021. Anonymized data will be freely available (stored on an OSF repository) as supporting material for publication.

IPD Sharing Time Frame

SAP will be available on the OSF repository by January 2021. Anonymized data will be freely available (stored on an OSF repository) as supporting material for publication.

IPD Sharing Access Criteria

No restriction

IPD Sharing Supporting Information Type

  • Study Protocol
  • Statistical Analysis Plan (SAP)

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Small Fiber Neuropathy

Subscribe