The Anesthetic Efficacy of 3% Mepivacaine Plus 2% Lidocaine With 1:100,000 Epinephrine for Lower Jaw Dental Injections

November 6, 2020 updated by: John Nusstein, Ohio State University

A Prospective, Randomized, Double-blind Study of the Anesthetic Efficacy of 3% Mepivacaine Plus 2% Lidocaine With 1:100,000 Epinephrine for Inferior Alveolar Nerve Blocks.

The inferior alveolar nerve block (shot) is the most frequently used injection technique for achieving local anesthesia (numbness) for the teeth in the lower jaw. However, this injection does not always result in successful pulpal (tooth) anesthesia (patient felt pain). No study has combined mepivacaine and lidocaine anesthetics (numbing solutions) for this type of injection (shot). The investigators propose to compare an injection of mepivacaine followed by lidocaine to an injection of lidocaine followed by lidocaine to determine if there is a difference in effectiveness.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

One hundred adult male and female subjects will randomly receive two sets of inferior alveolar block injections (shots) consisting of; 1.) an injection of 1.8 mL of 3% mepivacaine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine, and 2.) an injection of 1.8 mL of 2% lidocaine with 1:100,000 epinephrine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine, at two separate appointments spaced at least two weeks apart, in a crossover design. Whether the subject receives the mepivacaine or the lidocaine for the first injection will be determined randomly. The doctor will not know whether the subject receives mepivacaine or lidocaine for the first injection. The subject will not know which anesthetics he/she receives. A pulp tester will be used to test the lower jaw teeth (molars, premolars, and incisors) for anesthesia (numbness) in 4-minute time cycles for 60 minutes. The data will be statistically analyzed.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
100

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Phase 4

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • United States
    • Ohio
      • Columbus, Ohio, United States, 43210
        • The Ohio State University College of Dentistry, Postle Hall

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

18 years to 65 years (ADULT, OLDER_ADULT)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • between the ages of 18 and 65 years
  • good health (ASA classification I or II)
  • able to provide informed consent

Exclusion Criteria:

  • allergy to lidocaine or mepivacaine
  • history of significant medical problem (ASA classification III or greater)
  • depression
  • have taken CNS depressants (including alcohol or any analgesic medications) within the last 48 hours
  • lactating or pregnant
  • inability to give informed consent

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: TREATMENT
  • Allocation: RANDOMIZED
  • Interventional Model: CROSSOVER
  • Masking: DOUBLE

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
EXPERIMENTAL: mepivacaine + lidocaine followed by lidocaine + lidocaine
A repeated measures design utilizing a single group of subjects was employed with each subject serving as his/her own control. Each subject received two interventions: 1.) 1.8 cc 3% mepivacaine and 1.8 cc 2% lidocaine with 1:100,000 epinephrine (3% mepivacaine/2% lidocaine with epinephrine - combination 1) and 2.) 1.8 cc 2% lidocaine with 1:100,000 epinephrine followed by 1.8 cc 2% liocaine with 1:100,000 epinephrine at two seperate appointments spaced 2 weeks apart.
Drug: mepivacaine + lidocaine followed by lidocaine +lidocaine
1.8 mL of 3% mepivacaine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine
Other Names:
  • Combo 1
EXPERIMENTAL: lidocaine + lidocaine followed by mepivacaine plus lidocaine
A repeated measures design utilizing a single group of subjects was employed with each subject serving as his/her own control. Each subject received two interventions: 1.) 1.8 cc 2% lidocaine with 1:100,000 epinephrine and 1.8 cc 2% lidocaine with 1:100,000 epinephrine and 2.) 1.8 cc 3% mepivacaine and 1.8 cc 2% lidocaine with 1:100,000 epinephrine followed by 1.8 cc 2% liocaine with 1:100,000 epinephrine at two separate appointments spaced two weeks apart.
Drug: lidocaine + lidocaine followed by mepivacaine + lidocaine
1.8 mL of 2% lidocaine with 1:100,000 epinephrine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine followed by 1.8 mL of 3% mepivacaine followed by 1.8 mL of 2% lidocaine with 1:100,000 epinephrine
Other Names:
  • Combo 2

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Number of Participants Achieving Pulpal Anesthesia Success.
Time Frame: 60 minutes per injection sequence.
An electric pulp tester will be used to test the lower jaw teeth (molars, premolars, and incisors) for anesthesia (numbness) in 4-minute time cycles for 60 minutes. Measurements of less than 80 on the EPT is considered not numb (anesthesia failure). Readings of 80 equate to anesthetic success.
60 minutes per injection sequence.

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Ohio State University

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: John Nusstein, DDS, MS, Chair, Division of Endodontics

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
May 1, 2012

Primary Completion (ACTUAL)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
May 1, 2013

Study Completion (ACTUAL)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
May 1, 2013

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
April 2, 2012

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 9, 2012

First Posted (ESTIMATE)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
April 10, 2012

Study Record Updates

Last Update Posted (ACTUAL)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
November 17, 2020

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
November 6, 2020

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
November 1, 2020

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • Endo-Lam2012

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings