Characterization of Chitin-glucan Fiber Fermentation in Human After a Single Administration

April 3, 2018 updated by: Nathalie Delzenne, Université Catholique de Louvain
The aim of this research study is to characterize the fermentation of chitin-glucan fiber by assessing the volatile compounds released in the breath. For this purpose, an interventional study with control will be performed. After a single administration of 4.5 g of chitin-glucan fiber, the kinetic of production of exhaled volatile compounds (such as H2, methane, SCFAs,…) will be measured during twelve hours. These results will be compared to the exhaled volatile compounds measured during twelve hours after supplementation with 4.5g of maltodextrin (placebo).

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
15

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Belgium
      • Louvain-La-Neuve, Belgium, 1348
        • Center of Investigation in Clinical Nutrition

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

18 years to 40 years (Adult)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • Woman or man, aged of 18 to 40 years
  • Body mass index (BMI) between 18 and 25 kg/m2
  • In good general health as evidenced by medical history and physical examination
  • Non-smoker
  • Caucasian
  • For women: use of highly effective contraception
  • H2 - producer as evidenced by the screening test (described in latter section)
  • Provision of signed and dated informed consent form
  • Stated willingness to comply with all study procedures and availability for the duration of the study

Exclusion Criteria:

  • Subjects presenting gastro-intestinal disorders such as ulcers, diverticulitis and inflammatory bowel diseases
  • Subject presenting allergy or food intolerance (lactose, gluten,…)
  • Subjects with psychiatric problems and/or using antipsychotics
  • Current or recent (< 4 weeks) intake of antibiotics, probiotics, prebiotics, fiber supplement, and/or any products modulating gut transit
  • Feeding particular diet such as vegetarian diet or hyper protein diet
  • Chronic intake of drug, excepted contraceptive drug
  • Pregnant or lactating woman or woman who did not use highly effective contraception
  • Subjects who drink more than 3 glasses of alcohol per day (> 30 g of alcohol per day)
  • Subjects having participated to another clinical trial 1 month before the screening test visit
  • Subjects presenting an allergy or intolerance to one component of the product tested

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Other
  • Allocation: Non-Randomized
  • Interventional Model: Crossover Assignment
  • Masking: Single

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Exhaled acetate
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Flame ionization detector (GC- FID) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled propionate
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Flame ionization detector (GC- FID) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled butyrate
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Flame ionization detector (GC- FID) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Gut microbiota
Time Frame: within 4 days before the second test day
Illumina sequencing of 16SrDNA and GC-FID
within 4 days before the second test day
Fecal short-chain fatty acids
Time Frame: Within 4 days before the ingestion of chitin-glucan
Gaz chromatography using Flame ionization detector (GC- FID)
Within 4 days before the ingestion of chitin-glucan
Fecal conjugated-linoleic acids
Time Frame: Within 4 days before the ingestion of chitin-glucan
Gaz chromatography using Flame ionization detector (GC- FID)
Within 4 days before the ingestion of chitin-glucan
Fecal bile acids
Time Frame: Within 4 days before the ingestion of chitin-glucan
Gas chromatography-mass spectrometry (GC/MS)
Within 4 days before the ingestion of chitin-glucan
Gastro-intestinal symptom - discomfort
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - nausea
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - bloating
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - flatulences
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - gastrointestinal reflux
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - cramps
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - rumbling
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Gastro-intestinal symptom - burps
Time Frame: Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
100 mm Visual analog scale (0 = no symptom, 100 = very severe symptom) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 7 hours, 8 hours, 9 hours, 10 hours, 11 hours and 12 hours after product ingestion
Exhaled C2
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled CO2
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled H2S
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled O2
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled N2
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled CH4
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled CO
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled H2
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using Thermal Conductivity Detector (GC-TCD) - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Exhaled volatils compounds (for other short-chain fatty acids and other volatile organic compounds)
Time Frame: Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion
Gaz chromatography using selected ion flow tube mass spectrometry - Area under the curve (calculated on 12 hours following product ingestion) - Comparison between the test day 0 (ingestion of maltodextrin) and the test day 2 (ingestion of chitin-glucan)
Before product ingestion (baseline) and 30 minutes, 2 hours, 4 hours, 5 hours, 6 hours, 8 hours, 10 hours and 12 hours after product ingestion

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Université Catholique de Louvain

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: Nathalie Delzenne, Prof, UCL

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
March 8, 2018

Primary Completion (Actual)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
March 30, 2018

Study Completion (Actual)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
March 30, 2018

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
March 6, 2018

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 3, 2018

First Posted (Actual)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
April 11, 2018

Study Record Updates

Last Update Posted (Actual)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
April 11, 2018

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
April 3, 2018

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
April 1, 2018

More Information

Terms related to this study

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • FiberTAG1

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

Yes

IPD Plan Description

All data will be shared by the partners from the Consortium agreement.

  • exhaled volatile metabolites
  • gut microbiota derived metabolites
  • visual analog scales data
  • concomitant medication, inclusion/exclusion criteria, adverse event, food and beverages consummed.

Data will be shared at the end of the study.

IPD Sharing Time Frame

At the end of the study

IPD Sharing Access Criteria

Belonging to the project partener (Consortium agreement)

IPD Sharing Supporting Information Type

  • Study Protocol
  • Statistical Analysis Plan (SAP)
  • Clinical Study Report (CSR)

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

product manufactured in and exported from the U.S.

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings