Evaluation of the Effects of Different Rapid Maxillary Expansion Appliances on Obstructive Sleep Apnea

October 21, 2020 updated by: Gökçenur Gökçe, Izmir Katip Celebi University

Evaluation of the Effects of Different Rapid Maxillary Expansion Appliances on Obstructive Sleep Apnea: A Randomized Clinical Trial

Rapid maxillary expansion (RME) is a commonly used orthodontic treatment in patients with maxillary constriction to provide skeletal expansion, correct posterior crossbite and resolve naso-respiratory problems by reducing oral respiration.The aim of this randomized controlled trial was to evaluate the effects of tooth-borne, tooth tissue-borne and bone-borne RME appliances on sleep quality with polygraphy. The null hypothesis was that there is no difference for the sleep quality between the appliances.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Completed

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

Introduction. The aim of this 3-arm randomized controlled trial (RCT) was to evaluate the effects of tooth tissue-borne (KBME), tooth-borne (Hyrax), and bone-borne (MIDME) rapid maxillary expansion (RME) appliances on sleep quality with polygraphy. Methods. This study was designed in parallel with an allocation ratio of 1:1:1. 46 patients with narrow maxilla and OSAS were included in this study and randomly assigned to three groups: tooth tissue-borne, tooth-borne and boneborne expanders. Participants were congregated from the Department of Orthodontics, Faculty of Dentistry, Izmir Katip Celebi University, Turkey. In all groups, the expansion appliance was activated one-quarter turn twice a day until the desired suture opening was achieved. The primary outcome of this study was the correction of posterior crossbite. Secondary outcomes included polygraphic assessment of sleep parameters. Each subject participated in 1 overnight sleep test with polygraphy before the expansion (T0) and after a 3- month retention phase of treatment (T1). According to the results of polygraphy, 7 parameters; (apnea hypopnea index (AHI), number of apnea and hypopnea, desaturation index, lowest desaturation, average saturation, supin AHI) were examined to evaluate the changes in sleep scores. Kruskal-Wallis analysis and Dunn-Bonferroni test were used for inter-group comparisons and Wilcoxon analysis was used for intra-group evalaution. P<0.05 was accepted statistically significant. Computer-generated randomization was used with group allocation concealed using opaque, sealed envelopes. The outcome assessor was blinded to group assignment. The outcome assessor was blinded; however, it was not feasible to blind either operator or patients.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Enrollment (Actual)

Enrollment

The number of participants in a clinical study. The "anticipated" enrollment is the target number of participants that the researchers need for the study.
46

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

12 years to 14 years (CHILD)

Accepts Healthy Volunteers

No

Genders Eligible for Study

All

Description

Inclusion Criteria:

  1. No previous tonsillar, nasal or adenoid surgery and orthodontic treatment,
  2. Bilateral crossbite and need for RME,
  3. Maxillary and mandibular permanent teeth fully erupted,
  4. AHI ≥ 1

Exclusion Criteria:

  1. The presence of adenotonsillectomy due to tonsillar hypertrophy or adenoidal hypertrophy
  2. Having nasal/nasopharyngeal /oropharyngeal pathologies, craniofacial syndromes, systemic disease, poor oral hygiene,
  3. History of previous orthodontic treatment.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: TREATMENT
  • Allocation: RANDOMIZED
  • Interventional Model: PARALLEL
  • Masking: DOUBLE

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
EXPERIMENTAL: Tooth tissue-borne (KBME) expander
In this tooth tissue-borne appliance, the occlusal surfaces of the molar and premolar teeth and half of the palatinal and buccal surfaces are covered with heat polymerized acrylic. Hyrax expansion screw is in the midline, as far as possible to the palate positioned close and parallel.
Procedure: Rapid Maxillary Expansion Treatment
The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.
EXPERIMENTAL: Tooth-borne (Hyrax) expander
In this tooth-borne expansion appliance, orthodontic bands are placed on the right and left 1st premolar and 1st molar teeth of the patients and the bands are soldered to the Hyrax expansion screw. The expansion screw is in the midline, as far as possible to the palate positioned close and parallel.
Procedure: Rapid Maxillary Expansion Treatment
The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.
EXPERIMENTAL: Bone-borne (MIDME) expander
This bone-borne expander includes 2 mini-screws with a diameter of 1.6 mm and a length of 10 mm on the right and left sides, coinciding between the roots of the 2nd premolar and 1st molar teeth in addition to the hyrax expansion screw.
Procedure: Rapid Maxillary Expansion Treatment
The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Correction of posterior crossbite
Time Frame: After active expansion (up to 3 weeks). The evaluation of the result has been made by the physician with intraoral clinical examination.
The palatal cusps of the maxillary posterior teeth approximated the lingual cusps of the mandibular posterior teeth.
After active expansion (up to 3 weeks). The evaluation of the result has been made by the physician with intraoral clinical examination.

Secondary Outcome Measures

Secondary Outcome Measures

In a clinical study's protocol, a planned outcome measure that is not as important as the primary outcome measure for evaluating the effect of an intervention but is still of interest. Most clinical studies have more than one secondary outcome measure.
Outcome Measure
Measure Description
Time Frame
Polygraphic assessment of sleep parameters
Time Frame: At baseline (T0) and after 3 months retention period (T1)
Changes in apnea hypopnea index (AHI)
At baseline (T0) and after 3 months retention period (T1)
Polygraphic assessment of sleep parameters
Time Frame: At baseline (T0) and after 3 months retention period (T1)
Changes in desaturation index
At baseline (T0) and after 3 months retention period (T1)
Polygraphic assessment of sleep parameters
Time Frame: At baseline (T0) and after 3 months retention period (T1)
Changes in lowest desaturation
At baseline (T0) and after 3 months retention period (T1)
Polygraphic assessment of sleep parameters
Time Frame: At baseline (T0) and after 3 months retention period (T1)
Changes in average saturation
At baseline (T0) and after 3 months retention period (T1)
Polygraphic assessment of sleep parameters
Time Frame: At baseline (T0) and after 3 months retention period (T1)
Changes in the value of Supin AHI
At baseline (T0) and after 3 months retention period (T1)

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Izmir Katip Celebi University

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (ACTUAL)

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
July 1, 2016

Primary Completion (ACTUAL)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
January 13, 2017

Study Completion (ACTUAL)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
May 17, 2017

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
October 21, 2020

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 21, 2020

First Posted (ACTUAL)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
October 27, 2020

Study Record Updates

Last Update Posted (ACTUAL)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
October 27, 2020

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
October 21, 2020

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
October 1, 2020

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • 024

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

UNDECIDED

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Clinical Trials on Sleep Apnea Syndrome

Clinical Trials on Rapid Maxillary Expansion Treatment

Search Similar Trials

Sponsors and Collaborators

Medical Conditions

Drug Interventions

Conditions

Rare Diseases

Drug Interventions

Dietary Supplements

Sponsor/Collaborators

Locations

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings